Re: Sensors (W83627HF) in Tyan S2882

[Fabian Fenaut <fabian.fenaut@free.fr>]

Jean Delvare wrote:
>>> Nice catching. However the fix is not correct. "W83627HF" is the
>>>  correct name and "W83682HF" is the typo.
>> 
>> You sure ? Looks like W83627HF is handled by the 2nd one, no ?
> 
> Sure. Both drivers handle it. The w83267hf driver is prefered if the
> chip is found on the ISA bus, however the w83781d is the only one 
> that can handle the chip if it's on the I2C bus.
> 
> For a list of supported chips for each driver, you can take a look at
> the comments in the headers of the source files.

Ok, so I suppose this is the appropriate patch :


--- drivers/i2c/chips/Kconfig.orig      2004-04-19 19:05:53.000000000 +0200
+++ drivers/i2c/chips/Kconfig   2004-04-19 19:10:15.000000000 +0200
@@ -163,7 +163,7 @@
         select I2C_SENSOR
         help
           If you say yes here you get support for the Winbond W8378x series
-         of sensor chips: the W83781D, W83782D, W83783S and W83682HF,
+         of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
           and the similar Asus AS99127F.

           This driver can also be built as a module.  If so, the module


--
Fabian