From: Sebastian Witt <se.witt@gmx.net>
To: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Denis Vlasenko <vda@port.imtp.ilyichevsk.odessa.ua>,
linux-kernel@vger.kernel.org, andre@linux-ide.org,
frankt@promise.com
Subject: Re: PROBLEM: Oops when using both channels of the PDC20262
Date: Sun, 25 Apr 2004 22:21:54 +0200 [thread overview]
Message-ID: <408C1DE2.4070704@hasw.net> (raw)
In-Reply-To: <200404252147.05725.bzolnier@elka.pw.edu.pl>
[-- Attachment #1: Type: text/plain, Size: 616 bytes --]
Bartlomiej Zolnierkiewicz wrote:
> On Sunday 25 of April 2004 20:02, Sebastian Witt wrote:
>>Thanks, this patch works. I've tested now multiple times a 2.6.5 kernel
>>with and without this patch. The BIOS of my controller is also disabled
>>if this is important...
>
> Thanks. Can you retest with enabled BIOS?
If I find it ;-). It was removed some time ago because
sometimes the computer doesn't start when the controller was plugged in.
> Please also send me output output of 'cat /proc/ide/ide2/config'
> and 'cat /proc/ide/ide3/config' before and after applying this patch.
No problem.
Regards,
Sebastian
[-- Attachment #2: ide2-patched --]
[-- Type: text/plain, Size: 823 bytes --]
pci bus 00 device 88 vendor 105a device 4d38 channel 0
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 5a 10 33 4d
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d4 23 41 00 d4 23 41 00 d4 23 41 00 d4 23 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d4 23 41 00 d4 23 41 00 d4 23 41 00 d4 23 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #3: ide2-unpatched --]
[-- Type: text/plain, Size: 823 bytes --]
pci bus 00 device 88 vendor 105a device 4d38 channel 0
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 5a 10 33 4d
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11 24 41 00 11 24 41 00 11 24 41 00 11 24 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11 24 41 00 11 24 41 00 11 24 41 00 11 24 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #4: ide3-patched --]
[-- Type: text/plain, Size: 823 bytes --]
pci bus 00 device 88 vendor 105a device 4d38 channel 1
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 5a 10 33 4d
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d4 23 41 00 d4 23 41 00 d4 23 41 00 d4 23 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d4 23 41 00 d4 23 41 00 d4 23 41 00 d4 23 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #5: ide3-unpatched --]
[-- Type: text/plain, Size: 823 bytes --]
pci bus 00 device 88 vendor 105a device 4d38 channel 1
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 5a 10 33 4d
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11 24 41 00 11 24 41 00 11 24 41 00 11 24 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a 10 38 4d 07 00 00 02 01 00 04 01 00 20 00 00
01 cc 00 00 01 d0 00 00 01 d4 00 00 01 d8 00 00
01 dc 00 00 00 00 00 d9 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 11 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11 24 41 00 11 24 41 00 11 24 41 00 11 24 41 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
prev parent reply other threads:[~2004-04-25 20:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-23 21:30 PROBLEM: Oops when using both channels of the PDC20262 Sebastian Witt
2004-04-24 19:42 ` Denis Vlasenko
2004-04-24 20:30 ` Bartlomiej Zolnierkiewicz
2004-04-25 0:20 ` Sebastian Witt
2004-04-25 1:31 ` Bartlomiej Zolnierkiewicz
2004-04-25 18:02 ` Sebastian Witt
2004-04-25 19:47 ` Bartlomiej Zolnierkiewicz
2004-04-25 20:21 ` Sebastian Witt [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=408C1DE2.4070704@hasw.net \
--to=se.witt@gmx.net \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=andre@linux-ide.org \
--cc=frankt@promise.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vda@port.imtp.ilyichevsk.odessa.ua \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox