Linux version 2.6.5 (rene@7ixe4) (gcc version 3.2.3) #4 Mon May 3 22:33:54 CEST 2004
BIOS-provided physical RAM map:
 BIOS-88: 0000000000000000 - 000000000009f000 (usable)
 BIOS-88: 0000000000100000 - 0000000000850000 (usable)
8MB LOWMEM available.
On node 0 totalpages: 2128
  DMA zone: 2128 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=serial ro root=301 reboot=warm console=ttyS1
Initializing CPU#0
PID hash table entries: 64 (order 6: 512 bytes)
Using pit for high-res timesource
Console: colour VGA+ 80x25
Memory: 5928k/8512k available (1427k kernel code, 2172k reserved, 431k data, 96k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... No.
Calibrating delay loop... 8.19 BogoMIPS
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 00000000 00000000 00000000 00000000
CPU:     After all inits, caps: 00000000 00000000 00000000 00000000
CPU: 386
Checking 'hlt' instruction... OK.
Checking for popad bug... Buggy.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
ikconfig 0.7 with /proc/config*
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is an 8272A
loop: loaded (max 8 devices)
eth0: 3c5x9 found at 0x300, 10baseT port, address  00 20 af c1 37 1e, IRQ 10.
3c509.c:1.19b 08Nov2002 becker@scyld.com
http://www.scyld.com/network/3c509.html
hda: 203MB, CHS=685/16/38
hdb: 162MB, CHS=903/8/46
 hda: hda1
 hdb: hdb1 hdb2
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: PC Speaker
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
sb16: no OPL device at 0x220-0x222
ALSA device list:
  #0: Sound Blaster 16 at 0x220, irq 5, dma 1&5
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 96k freed
version 0 swap is no longer supported. Use mkswap -v1 /dev/hdb1
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
spurious 8259A interrupt: IRQ7.
eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 1321
eth0: Setting Rx mode to 1 addresses.