From: James Lamanna <jamesl@appliedminds.com>
To: linux-kernel@vger.kernel.org
Cc: adaplas@pol.net
Subject: Getting i815 Framebuffer working?!
Date: Thu, 06 May 2004 16:57:22 -0700 [thread overview]
Message-ID: <409AD0E2.4040705@appliedminds.com> (raw)
Using stock 2.6.5, I'm trying to get the Intel i810/5 framebuffer driver
to work. So far I have had no success.
Any help would be appreciated, system data follows.
Please CC me for I am not subscribed.
-- James Lamanna
I'm using the following lilo.conf line:
append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,\
hsync2:55,vsync1:50,vsync2:85,accel,mtrr"
Relevant Statements from dmesg:
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: AGP aperture is 64M @ 0xe0000000
i810fb: probe of 0000:00:02.0 failed with error -22
^^^^ Not promising... :)
NTFS driver 2.1.6 [Flags: R/O].
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized i810 1.4.0 20030605 on minor 0
[drm] Initialized i830 1.3.2 20021108 on minor 1
Relevant lspci output:
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset
Graphics Controller] (rev 04) (prog-if 00 [VGA])
Subsystem: Intel Corp. 82815 CGC [Chipset Graphics Controller]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable)
Region 1: Memory at e4100000 (32-bit, non-prefetchable)
[size=512K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Relevant parts of .config:
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
next reply other threads:[~2004-05-06 23:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-06 23:57 James Lamanna [this message]
2004-05-19 0:30 ` Getting i815 Framebuffer working?! Antonino A. Daplas
-- strict thread matches above, loose matches on Subject: below --
2004-05-07 0:36 James Lamanna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=409AD0E2.4040705@appliedminds.com \
--to=jamesl@appliedminds.com \
--cc=adaplas@pol.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox