From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262190AbUEWDow (ORCPT ); Sat, 22 May 2004 23:44:52 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262194AbUEWDow (ORCPT ); Sat, 22 May 2004 23:44:52 -0400 Received: from smtp-out6.blueyonder.co.uk ([195.188.213.9]:14769 "EHLO smtp-out6.blueyonder.co.uk") by vger.kernel.org with ESMTP id S262190AbUEWDou (ORCPT ); Sat, 22 May 2004 23:44:50 -0400 Message-ID: <40B01E31.8060003@blueyonder.co.uk> Date: Sun, 23 May 2004 04:44:49 +0100 From: Sid Boyce Reply-To: sboyce@blueyonder.co.uk User-Agent: Mozilla Thunderbird 0.6 (X11/20040502) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: RE: USB/EHCI boot freeze on 2.6.6-mm5 (and 2.6.6-mm4) Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 23 May 2004 03:44:53.0191 (UTC) FILETIME=[4E95CD70:01C44078] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Mike Javorski wrote: > Been running into a wall with this issue on my machine: > - Amd AthlonXP-2800 > - Asus A7N8X-E Deluxe (nForce2 Chipset) > - 512MB RAM > - single PATA HD > This motherboard supports USB 2.0 and up until 2.6.6-rc3(+patches) I was > not running into any problems with it. Now with everything after 2.6.6, > my systems locks on boot-up after the following 3 lines: > > ... > ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller > ehci_hcd 0000:00:02.2: irq 11, pci mem e0885000 > ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 > Same machine details as above, except I have IDE drives, hub and devices are USB 1.1. I experienced a similar problem while trying to boot up 2.6.6-mm5 (hard reset was the only thing that worked). I tried booting 2.6.6-mm4 which was the previous kernel I had working, that also gave the same bug, on console=ttyS1, I got reams of messages constantly that mentioned usb_storage, I thought mistakenly that I had them captured - will do a capture when next convenient. I unplugged the usb card reader and 2.6.6-mm5 is up and running. Regards Sid. -- Sid Boyce .... Hamradio G3VBV and keen Flyer Linux Only Shop.