2.6.7-rc1-mm1: libata flooding my log

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* 2.6.7-rc1-mm1: libata flooding my log
@ 2004-05-29 19:47 Prakash K. Cheemplavam
  2004-05-29 19:56 ` Jeff Garzik
  0 siblings, 1 reply; 7+ messages in thread
From: Prakash K. Cheemplavam @ 2004-05-29 19:47 UTC (permalink / raw)
  To: linux-kernel

Hi,

I noticed following messages appearing very often in my log:

FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense = 70  5
ASC=20 ASCQ= 0
Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
0x00 0x20 0x00


Any idea of what is going on? Is dmesg output needed? The system seesm 
to behave rel normal, beside a bit performance degration, I think.

BTW, the new libata version does two good things:
- write back is activated
- now hdparm -t /dev/sda gives high throughoutput straight form the 
first time.

Cheers,

Prakash

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-05-29 19:47 2.6.7-rc1-mm1: libata flooding my log Prakash K. Cheemplavam
@ 2004-05-29 19:56 ` Jeff Garzik
  2004-05-29 20:43   ` Prakash K. Cheemplavam
  0 siblings, 1 reply; 7+ messages in thread
From: Jeff Garzik @ 2004-05-29 19:56 UTC (permalink / raw)
  To: Prakash K. Cheemplavam; +Cc: linux-kernel

Prakash K. Cheemplavam wrote:
> Hi,
> 
> I noticed following messages appearing very often in my log:
> 
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> FAILED
>   status = 1, message = 00, host = 0, driver = 08
>   Current sd: sense = 70  5
> ASC=20 ASCQ= 0
> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
> 0x00 0x20 0x00
> 
> 
> Any idea of what is going on? Is dmesg output needed? The system seesm 
> to behave rel normal, beside a bit performance degration, I think.

Reading REPORTING-BUGS for the info that is needed.

I wonder if you have a bad SATA cable, initially, though.


> BTW, the new libata version does two good things:
> - write back is activated

this is cosmetic, it was always activated.


> - now hdparm -t /dev/sda gives high throughoutput straight form the 
> first time.

this is because Andrew Morton fixed a bug unrelated to libata :)

	Jeff




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-05-29 19:56 ` Jeff Garzik
@ 2004-05-29 20:43   ` Prakash K. Cheemplavam
  2004-06-02  8:10     ` Prakash K. Cheemplavam
  0 siblings, 1 reply; 7+ messages in thread
From: Prakash K. Cheemplavam @ 2004-05-29 20:43 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: linux-kernel

Jeff Garzik wrote:
> Prakash K. Cheemplavam wrote:
> 
[snip]

>> FAILED
>>   status = 1, message = 00, host = 0, driver = 08
>>   Current sd: sense = 70  5
>> ASC=20 ASCQ= 0
>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>> 0x00 0x20 0x00
>> FAILED
>>   status = 1, message = 00, host = 0, driver = 08
>>   Current sd: sense = 70  5
>> ASC=20 ASCQ= 0
>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>> 0x00 0x20 0x00
>> FAILED
>>   status = 1, message = 00, host = 0, driver = 08
>>   Current sd: sense = 70  5
>> ASC=20 ASCQ= 0
>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>> 0x00 0x20 0x00
>>
>>
>> Any idea of what is going on? Is dmesg output needed? The system seesm 
>> to behave rel normal, beside a bit performance degration, I think.
> 
> 
> Reading REPORTING-BUGS for the info that is needed.

Oh OK, so here it goes (I have rebooted to a patched mm kernel, but tha 
plain mm showed the same behaviour, just in cae you are wondering...):

Linux tachyon 2.6.7-rc1-love1 #3 Sat May 29 10:40:18 CEST 2004 i686 AMD 
Athlon(tm)  AuthenticAMD GNU/Linux

Gnu C                  3.4.0
Gnu make               3.80
binutils               2.14.90.0.8
util-linux             2.12
mount                  2.12
module-init-tools      3.0
e2fsprogs              1.35
nfs-utils              1.0.6
Linux C Library        2.3.3
Dynamic linker (ldd)   2.3.3
Procps                 3.2.1
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.2.1
Modules Loaded         usblp ehci_hcd ohci_hcd usbcore nvidia

root@tachyon linux # cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 6
model           : 8
model name      : AMD Athlon(tm)
stepping        : 1
cpu MHz         : 2205.234
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge 
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips        : 4358.14


root@tachyon linux # cat /proc/modules
usblp 10624 0 - Live 0xf89e2000
ehci_hcd 28612 0 - Live 0xf89c1000
ohci_hcd 18756 0 - Live 0xf89b2000
usbcore 97504 5 usblp,ehci_hcd,ohci_hcd, Live 0xf89c9000
nvidia 2075080 0 - Live 0xf8b10000

root@tachyon linux # cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : w83627hf
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-5007 : nForce2 SMBus
5100-5107 : nForce2 SMBus
9000-afff : PCI Bus #01
   9000-9007 : 0000:01:0b.0
     9000-9007 : sata_sil
   9400-9403 : 0000:01:0b.0
     9400-9403 : sata_sil
   9800-9807 : 0000:01:0b.0
     9800-9807 : sata_sil
   9c00-9c03 : 0000:01:0b.0
     9c00-9c03 : sata_sil
   a000-a00f : 0000:01:0b.0
     a000-a00f : sata_sil
b000-b007 : 0000:00:04.0
   b000-b007 : eth0
b400-b4ff : 0000:00:06.0
b800-b87f : 0000:00:06.0
   b800-b83f : NVidia nForce2 - Controller
c400-c41f : 0000:00:01.1
f000-f00f : 0000:00:09.0
   f000-f007 : ide0
   f008-f00f : ide1


root@tachyon linux # cat /proc/iomem
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cebff : Video ROM
000d0000-000d47ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
   00100000-0038dc11 : Kernel code
   0038dc12-0047b53f : Kernel data
3fff0000-3fff2fff : ACPI Non-volatile Storage
3fff3000-3fffffff : ACPI Tables
a0000000-bfffffff : 0000:00:00.0
c0000000-c7ffffff : PCI Bus #02
   c0000000-c7ffffff : 0000:02:00.0
c8000000-c9ffffff : PCI Bus #02
   c8000000-c8ffffff : 0000:02:00.0
ca000000-cbffffff : PCI Bus #01
   cb000000-cb0001ff : 0000:01:0b.0
     cb000000-cb0001ff : sata_sil
cc000000-cc07ffff : 0000:00:05.0
cc080000-cc080fff : 0000:00:02.0
   cc080000-cc080fff : ohci_hcd
cc081000-cc081fff : 0000:00:06.0
   cc081000-cc0811ff : NVidia nForce2 - AC'97
cc083000-cc083fff : 0000:00:02.1
   cc083000-cc083fff : ohci_hcd
cc084000-cc0847ff : 0000:00:0d.0
cc085000-cc08503f : 0000:00:0d.0
cc086000-cc0860ff : 0000:00:02.2
   cc086000-cc0860ff : ehci_hcd
cc087000-cc087fff : 0000:00:04.0
   cc087000-cc087fff : eth0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

root@tachyon linux # lspci -vvv
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different 
version?) (rev c1)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Region 0: Memory at a0000000 (32-bit, prefetchable)
         Capabilities: [40] AGP version 3.0
                 Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- 
FW+ Rate=x8
         Capabilities: [60] #08 [2001]

0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 
(rev c1)
         Subsystem: nVidia Corporation: Unknown device 0c17
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 
(rev c1)
         Subsystem: nVidia Corporation: Unknown device 0c17
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 
(rev c1)
         Subsystem: nVidia Corporation: Unknown device 0c17
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 
(rev c1)
         Subsystem: nVidia Corporation: Unknown device 0c17
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-

0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 
(rev c1)
         Subsystem: nVidia Corporation: Unknown device 0c17
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-

0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Capabilities: [48] #08 [01e1]

0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 23
         Region 0: I/O ports at c400
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a3) (prog-if 10 [OHCI])
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Interrupt: pin A routed to IRQ 22
         Region 0: Memory at cc080000 (32-bit, non-prefetchable)
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a3) (prog-if 10 [OHCI])
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Interrupt: pin B routed to IRQ 21
         Region 0: Memory at cc083000 (32-bit, non-prefetchable)
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a3) (prog-if 20 [EHCI])
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Interrupt: pin C routed to IRQ 20
         Region 0: Memory at cc086000 (32-bit, non-prefetchable)
         Capabilities: [44] #0a [2080]
         Capabilities: [80] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet 
Controller (rev a1)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (250ns min, 5000ns max)
         Interrupt: pin A routed to IRQ 22
         Region 0: Memory at cc087000 (32-bit, non-prefetchable)
         Region 1: I/O ports at b000 [size=8]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce 
MultiMedia audio [Via VT82C686B] (rev a2)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (250ns min, 3000ns max)
         Interrupt: pin A routed to IRQ 21
         Region 0: Memory at cc000000 (32-bit, non-prefetchable)
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 
AC97 Audio Controler (MCP) (rev a1)
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (500ns min, 1250ns max)
         Interrupt: pin A routed to IRQ 20
         Region 0: I/O ports at b400
         Region 1: I/O ports at b800 [size=128]
         Region 2: Memory at cc081000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge 
(rev a3) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
         I/O behind bridge: 00009000-0000afff
         Memory behind bridge: ca000000-cbffffff
         Prefetchable memory behind bridge: fff00000-000fffff
         Expansion ROM at 00009000 [disabled] [size=8K]
         BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 
(prog-if 8a [Master SecP PriP])
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Region 4: I/O ports at f000 [size=16]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire 
(IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
         Subsystem: ABIT Computer Corp.: Unknown device 1c00
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Interrupt: pin A routed to IRQ 22
         Region 0: Memory at cc084000 (32-bit, non-prefetchable)
         Region 1: Memory at cc085000 (32-bit, non-prefetchable) [size=64]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 
(prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32
         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
         I/O behind bridge: 0000f000-00000fff
         Memory behind bridge: c8000000-c9ffffff
         Prefetchable memory behind bridge: c0000000-c7ffffff
         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:01:0b.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 
3112 SATARaid Controller (rev 02)
         Subsystem: CMD Technology Inc: Unknown device 6112
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 32, cache line size 08
         Interrupt: pin A routed to IRQ 18
         Region 0: I/O ports at 9000
         Region 1: I/O ports at 9400 [size=4]
         Region 2: I/O ports at 9800 [size=8]
         Region 3: I/O ports at 9c00 [size=4]
         Region 4: I/O ports at a000 [size=16]
         Region 5: Memory at cb000000 (32-bit, non-prefetchable) [size=512]
         Capabilities: [60] Power Management version 2
                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:02:00.0 VGA compatible controller: nVidia Corporation NV28 
[GeForce4 Ti 4200 AGP 8x] (rev a1) (prog-if 00 [VGA])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 248 (1250ns min, 250ns max)
         Interrupt: pin A routed to IRQ 19
         Region 0: Memory at c8000000 (32-bit, non-prefetchable)
         Region 1: Memory at c0000000 (32-bit, prefetchable) [size=128M]
         Capabilities: [60] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [44] AGP version 3.0
                 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- 
FW+ Rate=x8

root@tachyon linux # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
   Vendor: ATA      Model: SAMSUNG SP1614N  Rev: TM10
   Type:   Direct-Access                    ANSI SCSI revision: 05



> 
> I wonder if you have a bad SATA cable, initially, though.

I don't think so, because previous mm kernels didn't show anything like 
this.

bye,

Prakash

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-05-29 20:43   ` Prakash K. Cheemplavam
@ 2004-06-02  8:10     ` Prakash K. Cheemplavam
  2004-06-03  5:33       ` Prakash K. Cheemplavam
  0 siblings, 1 reply; 7+ messages in thread
From: Prakash K. Cheemplavam @ 2004-06-02  8:10 UTC (permalink / raw)
  Cc: Jeff Garzik, linux-kernel

Prakash K. Cheemplavam wrote:
> Jeff Garzik wrote:
> 
>> Prakash K. Cheemplavam wrote:
>>
> [snip]
> 
>>> FAILED
>>>   status = 1, message = 00, host = 0, driver = 08
>>>   Current sd: sense = 70  5
>>> ASC=20 ASCQ= 0
>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>>> 0x00 0x20 0x00
>>> FAILED
>>>   status = 1, message = 00, host = 0, driver = 08
>>>   Current sd: sense = 70  5
>>> ASC=20 ASCQ= 0
>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>>> 0x00 0x20 0x00
>>> FAILED
>>>   status = 1, message = 00, host = 0, driver = 08
>>>   Current sd: sense = 70  5
>>> ASC=20 ASCQ= 0
>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 
>>> 0x00 0x20 0x00
>>>
>>>
>>

> 
> 
>>
>> I wonder if you have a bad SATA cable, initially, though.
> 
> 
> I don't think so, because previous mm kernels didn't show anything like 
> this.
> 

I tried again a 2.6.6 based mm kernel and all is OK. Furthermore I am 
not the only one getting these messages with the 2.6.7-rcX mm kernels. 
Any idea? I tried to copy the older libata to the new kernel, but didn't 
work as I got a compilation failure...

Prakash

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-06-02  8:10     ` Prakash K. Cheemplavam
@ 2004-06-03  5:33       ` Prakash K. Cheemplavam
  2004-06-03  9:36         ` Daniel Drake
  0 siblings, 1 reply; 7+ messages in thread
From: Prakash K. Cheemplavam @ 2004-06-03  5:33 UTC (permalink / raw)
  To: linux-kernel; +Cc: Jeff Garzik

Prakash K. Cheemplavam wrote:
> Prakash K. Cheemplavam wrote:
> 
>> Jeff Garzik wrote:
>>
>>> Prakash K. Cheemplavam wrote:
>>>
>> [snip]
>>
>>>> FAILED
>>>>   status = 1, message = 00, host = 0, driver = 08
>>>>   Current sd: sense = 70  5
>>>> ASC=20 ASCQ= 0
>>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 
>>>> 0x00 0x00 0x20 0x00
>>>> FAILED
>>>>   status = 1, message = 00, host = 0, driver = 08
>>>>   Current sd: sense = 70  5
>>>> ASC=20 ASCQ= 0
>>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 
>>>> 0x00 0x00 0x20 0x00
>>>> FAILED
>>>>   status = 1, message = 00, host = 0, driver = 08
>>>>   Current sd: sense = 70  5
>>>> ASC=20 ASCQ= 0
>>>> Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06 0x00 0x00 
>>>> 0x00 0x00 0x20 0x00
>>>>
>>>>
>>>
> 
>>
>>
>>>
>>> I wonder if you have a bad SATA cable, initially, though.
>>
>>
>>
>> I don't think so, because previous mm kernels didn't show anything 
>> like this.
>>

So I tried something new. I enabled the SCSI error reporting and now get 
this:

FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense key Illegal Request
Additional sense: Invalid command operation code
FAILED
   status = 1, message = 00, host = 0, driver = 08
   Current sd: sense key Illegal Request
Additional sense: Invalid command operation code


I found another interesting thing: It seems those errors only appear 
when I use mozilla thunderbird! Any idea what tb is trying to do to the 
hd? As I said earlier kernels didn't report such errors. (Are those 
actually errors?)

Prakash

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-06-03  5:33       ` Prakash K. Cheemplavam
@ 2004-06-03  9:36         ` Daniel Drake
  2004-06-03 11:49           ` Prakash K. Cheemplavam
  0 siblings, 1 reply; 7+ messages in thread
From: Daniel Drake @ 2004-06-03  9:36 UTC (permalink / raw)
  To: Prakash K. Cheemplavam; +Cc: linux-kernel, Jeff Garzik

Prakash K. Cheemplavam wrote:
> I found another interesting thing: It seems those errors only appear 
> when I use mozilla thunderbird! Any idea what tb is trying to do to the 
> hd? As I said earlier kernels didn't report such errors. (Are those 
> actually errors?)

I'm having similar problems (posted to linux-ide last week). Its not just 
thunderbird though, I can easily reproduce this under heavy disk activity 
(e.g. rsync'ing lots of data with a local server while unpacking/patching a 
kernel).

Daniel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: 2.6.7-rc1-mm1: libata flooding my log
  2004-06-03  9:36         ` Daniel Drake
@ 2004-06-03 11:49           ` Prakash K. Cheemplavam
  0 siblings, 0 replies; 7+ messages in thread
From: Prakash K. Cheemplavam @ 2004-06-03 11:49 UTC (permalink / raw)
  To: Daniel Drake; +Cc: linux-kernel, Jeff Garzik

Daniel Drake wrote:
> Prakash K. Cheemplavam wrote:
> 
>> I found another interesting thing: It seems those errors only appear 
>> when I use mozilla thunderbird! Any idea what tb is trying to do to 
>> the hd? As I said earlier kernels didn't report such errors. (Are 
>> those actually errors?)
> 
> 
> I'm having similar problems (posted to linux-ide last week). Its not 
> just thunderbird though, I can easily reproduce this under heavy disk 
> activity (e.g. rsync'ing lots of data with a local server while 
> unpacking/patching a kernel).
> 

I seems 2.6.7-rc2-mm2 fixed the issue. At least since 2h no entry in my 
logs. Well done, Jeff (if it was you :-)).

Prakash

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2004-06-03 11:50 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-05-29 19:47 2.6.7-rc1-mm1: libata flooding my log Prakash K. Cheemplavam
2004-05-29 19:56 ` Jeff Garzik
2004-05-29 20:43   ` Prakash K. Cheemplavam
2004-06-02  8:10     ` Prakash K. Cheemplavam
2004-06-03  5:33       ` Prakash K. Cheemplavam
2004-06-03  9:36         ` Daniel Drake
2004-06-03 11:49           ` Prakash K. Cheemplavam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox