From: Manfred Spraul <manfred@colorfullife.com>
To: Linus Torvalds <torvalds@osdl.org>
Cc: ktech@wanadoo.es,
Kernel Mailing List <linux-kernel@vger.kernel.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: 2.6.7-rc1 breaks forcedeth
Date: Sun, 06 Jun 2004 10:36:16 +0200 [thread overview]
Message-ID: <40C2D780.4010009@colorfullife.com> (raw)
In-Reply-To: <Pine.LNX.4.58.0406051958150.7010@ppc970.osdl.org>
[-- Attachment #1: Type: text/plain, Size: 923 bytes --]
Linus Torvalds wrote:
>I suspect that the driver should at the very least make sure to disable
>any potentially pending interrupts in the "nv_probe()" function. I have no
>idea how to do that, but it looks like something like
>
> writel(0, base + NvRegIrqMask);
> writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
>
>should probably do it. It would be better to reset the thing completely,
>methinks, but whatever.
>
>
>
I'll add that, but it's only a partial fix: what if ehci_hcd is loaded
before the forcedeth driver?
Luis, could you apply the patch and boot with it? It should print
something like
forcedeth: irq line 11, Status 0x00000020, Mask 0x00000020
If mask and status are really not zero, then it explains your problems.
Additionally I try to reset the nic in nv_probe - there were a few
reports seemed to indicate that the nic generates timer interrupts even
if the mask is zero.
--
Manfred
[-- Attachment #2: patch-forcedeth-test --]
[-- Type: text/plain, Size: 1728 bytes --]
--- 2.6/drivers/net/forcedeth.c 2004-05-10 04:31:59.000000000 +0200
+++ build-2.6/drivers/net/forcedeth.c 2004-06-06 10:31:43.826368991 +0200
@@ -1195,16 +1195,13 @@
enable_irq(dev->irq);
}
-static int nv_open(struct net_device *dev)
+static void nv_reset(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
u8 *base = get_hwbase(dev);
- int ret, oom, i;
- dprintk(KERN_DEBUG "nv_open: begin\n");
+ writel(0, base + NvRegIrqMask);
+ writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
- /* 1) erase previous misconfiguration */
- /* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
writel(0, base + NvRegMulticastAddrB);
writel(0, base + NvRegMulticastMaskA);
@@ -1215,6 +1212,20 @@
writel(0, base + NvRegUnknownTransmitterReg);
nv_txrx_reset(dev);
writel(0, base + NvRegUnknownSetupReg6);
+ pci_push(base);
+}
+
+static int nv_open(struct net_device *dev)
+{
+ struct fe_priv *np = get_nvpriv(dev);
+ u8 *base = get_hwbase(dev);
+ int ret, oom, i;
+
+ dprintk(KERN_DEBUG "nv_open: begin\n");
+
+ /* 1) erase previous misconfiguration */
+ /* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
+ nv_reset(dev);
/* 2) initialize descriptor rings */
np->in_shutdown = 0;
@@ -1506,6 +1517,11 @@
writel(0, base + NvRegWakeUpFlags);
np->wolenabled = 0;
+printk(KERN_ERR "forcedeth: irq line %d, Status 0x%8x, Mask %0x8x\n",
+ pci_dev->irq, readl(base + NvRegIrqStatus),
+ readl(base + NvRegIrqMask));
+ nv_reset(dev);
+
np->tx_flags = cpu_to_le16(NV_TX_LASTPACKET|NV_TX_LASTPACKET1|NV_TX_VALID);
if (id->driver_data & DEV_NEED_LASTPACKET1)
np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1);
next prev parent reply other threads:[~2004-06-06 8:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-06 1:59 2.6.7-rc1 breaks forcedeth ktech
2004-06-06 3:14 ` Linus Torvalds
2004-06-06 8:36 ` Manfred Spraul [this message]
2004-06-06 17:04 ` Linus Torvalds
2004-06-06 18:13 ` Jeff Garzik
2004-06-06 18:21 ` Jeff Garzik
2004-06-06 18:32 ` Linus Torvalds
-- strict thread matches above, loose matches on Subject: below --
2004-06-16 18:40 David Mansfield
2004-06-06 13:49 jjluza
[not found] <E1BWxTh-0002dx-KR@mb06.in.mad.eresmas.com>
2004-06-06 13:31 ` Daniel Schmitt
2004-06-06 12:10 ktech
2004-06-06 12:53 ` Vincent van de Camp
2004-06-06 13:40 ` Manfred Spraul
2004-06-06 14:17 ` Manfred Spraul
2004-06-05 23:41 Luis Miguel García Mancebo
2004-06-05 23:50 ` Linus Torvalds
2004-05-31 0:29 jjluza
2004-05-30 17:54 Luis Miguel García Mancebo
2004-05-30 20:47 ` Jeff Garzik
2004-05-30 15:57 Lee Howard
2004-05-30 17:20 ` Jeff Garzik
2004-05-30 22:59 ` Lee Howard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40C2D780.4010009@colorfullife.com \
--to=manfred@colorfullife.com \
--cc=jgarzik@pobox.com \
--cc=ktech@wanadoo.es \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox