From: Pieter Ennes <lkml@spam.ennes.net>
To: linux-kernel@vger.kernel.org
Subject: 2.6.7-rc3-mm1 and advansys driver failes to mount
Date: Sat, 12 Jun 2004 10:26:55 +0200 [thread overview]
Message-ID: <40CABE4F.1040104@spam.ennes.net> (raw)
Hi,
I'm having troubles getting the advansys driver to work in
2.6.7-rc3-mm1. dmesg output seems OK, but when mounting
no filesystem can be found on the partitions.
2.6.7-rc3 is fine. I noticed a few changes in drivers/scsi/advansys.c,
but i'm not much of a hacker to sort it out...
scsi1 : AdvanSys SCSI 3.3GJ: PCI Ultra-Wide: PCIMEM
0xE0BE0000-0xE0BE003F, IRQ 0x13
Vendor: SEAGATE Model: ST39173W Rev: 6244
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target2/lun0: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 0
Vendor: IBM Model: IC35L036UWD210-0 Rev: S5CQ
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdc: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sdc: drive cache: write back
/dev/scsi/host1/bus0/target6/lun0: unknown partition table
Attached scsi disk sdc at scsi1, channel 0, id 6, lun 0
Attached scsi generic sg2 at scsi1, channel 0, id 6, lun 0, type 0
Cheers,
--
- Pieter
reply other threads:[~2004-06-12 8:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40CABE4F.1040104@spam.ennes.net \
--to=lkml@spam.ennes.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox