From: Corey Minyard <minyard@acm.org>
To: Holger Kiehl <Holger.Kiehl@dwd.de>
Cc: Alex Williamson <alex.williamson@hp.com>,
Philipp Matthias Hahn <pmhahn@titan.lahn.de>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: IPMI hangup in 2.6.6-rc3
Date: Wed, 16 Jun 2004 15:42:57 -0500 [thread overview]
Message-ID: <40D0B0D1.60804@acm.org> (raw)
In-Reply-To: <Pine.LNX.4.58.0406161842180.13439@praktifix.dwd.de>
I cannot figure out from the traceback what is wrong, and I haven't been
able to reproduce this, even with ipmitool.
What kernel version are you running? Can you verify that the attached
patch is in your code?
--- linux-2.6.7-rc3-full/drivers/char/ipmi/ipmi_devintf.c.orig Wed Jun 9 12:08:23 2004
+++ linux-2.6.7-rc3-full/drivers/char/ipmi/ipmi_devintf.c Wed Jun 9 12:07:09 2004
@@ -199,7 +199,7 @@ static int handle_send_req(ipmi_user_t
goto out;
}
- if (copy_from_user(&msgdata,
+ if (copy_from_user(msgdata,
req->msg.data,
req->msg.data_len))
{
If that doesn't help, can you upgrade to 2.6.7-rc3-mm2 and re-try this
patch?
If that doesn't help, Can you turn on frame pointers and try again?
This will give a cleaner backtrace.
-Corey
Holger Kiehl wrote:
>On Wed, 16 Jun 2004, Holger Kiehl wrote:
>
>
>
>>On Wed, 16 Jun 2004, Corey Minyard wrote:
>>
>>
>>
>>>I missed a part of the patch, here is a new one with the include file changes.
>>>
>>>-Corey
>>>
>>>Corey Minyard wrote:
>>>
>>>
>>>
>>>>Unfortuantely, that fix has some problems, but it was on the right track. I
>>>>have a new patch attached; can you try it out? Also, the kernel interface
>>>>has not changed. It should be exactly the same as before.
>>>>
>>>>-Corey
>>>>
>>>>
>>Yes, with this patch it no longer hangs. But ipmitool still crashes
>>
>> root@apollo:~# ipmitool -I open sdr list
>> Segmentation fault
>>
>>
>>
>Just when I send the mail I noticed that each time I call ipmitool I get
>an oops:
>
>Jun 16 18:43:40 apollo kernel: <1>Unable to handle kernel paging request at virtual address 00100104
>Jun 16 18:43:40 apollo kernel: printing eip:
>Jun 16 18:43:40 apollo kernel: c013ba4a
>Jun 16 18:43:40 apollo kernel: *pde = 00000000
>Jun 16 18:43:40 apollo kernel: Oops: 0000 [#54]
>Jun 16 18:43:40 apollo kernel: SMP
>Jun 16 18:43:40 apollo kernel: Modules linked in: bonding
>Jun 16 18:43:40 apollo kernel: CPU: 1
>Jun 16 18:43:40 apollo kernel: EIP: 0060:[<c013ba4a>] Not tainted
>Jun 16 18:43:40 apollo kernel: EFLAGS: 00010086 (2.6.7)
>Jun 16 18:43:40 apollo kernel: EIP is at kfree+0x37/0x66
>Jun 16 18:43:40 apollo kernel: eax: 00000001 ebx: ffffffea ecx: 00100100 edx: c1000000
>Jun 16 18:43:40 apollo kernel: esi: 000015ec edi: 00000202 ebp: ffffffff esp: f6dcce84
>Jun 16 18:43:40 apollo kernel: ds: 007b es: 007b ss: 0068
>Jun 16 18:43:40 apollo kernel: Process ipmitool (pid: 19786, threadinfo=f6dcc000 task=c2269360)
>Jun 16 18:43:40 apollo kernel: Stack: ffffffea f6dccf6c f6dcceb0 c01dedca f6dccf78 00000000 00000000 ffffffff
>Jun 16 18:43:40 apollo kernel: 00000000 f7b8f7c8 000015ec 00000500 c000000f f61ebd80 00000282 f7c8be2c
>Jun 16 18:43:40 apollo kernel: c02e9600 f6e8b008 f6e8b008 00000000 00000004 f6dccf6c bffff2c0 f6dccf6c
>Jun 16 18:43:40 apollo kernel: Call Trace:
>Jun 16 18:43:40 apollo kernel: [<c01dedca>] handle_send_req+0xd3/0xe7
>Jun 16 18:43:40 apollo kernel: [<c01df205>] ipmi_ioctl+0x427/0x474
>Jun 16 18:43:40 apollo kernel: [<c015ece7>] sys_select+0x21c/0x482
>Jun 16 18:43:40 apollo kernel: [<c015e036>] sys_ioctl+0xef/0x223
>Jun 16 18:43:40 apollo kernel: [<c0104cf1>] sysenter_past_esp+0x52/0x71
>Jun 16 18:43:40 apollo kernel:
>Jun 16 18:43:40 apollo kernel: Code: 8b 1c 81 8b 03 3b 43 04 73 18 89 74 83 10 83 03 01 57 9d 8b
>
>
>
>
>>>EIP; c013ba4a No symbols available <=====
>>>
>>>
>
>Trace; c01dedca No symbols available
>Trace; c01df205 No symbols available
>Trace; c015ece7 No symbols available
>Trace; c015e036 No symbols available
>Trace; c0104cf1 No symbols available
>
>Code; c013ba4a No symbols available
>00000000 <_EIP>:
>Code; c013ba4a No symbols available <=====
> 0: 8b 1c 81 mov (%ecx,%eax,4),%ebx <=====
>Code; c013ba4d No symbols available
> 3: 8b 03 mov (%ebx),%eax
>Code; c013ba4f No symbols available
> 5: 3b 43 04 cmp 0x4(%ebx),%eax
>Code; c013ba52 No symbols available
> 8: 73 18 jae 22 <_EIP+0x22>
>Code; c013ba54 No symbols available
> a: 89 74 83 10 mov %esi,0x10(%ebx,%eax,4)
>Code; c013ba58 No symbols available
> e: 83 03 01 addl $0x1,(%ebx)
>Code; c013ba5b No symbols available
> 11: 57 push %edi
>Code; c013ba5c No symbols available
> 12: 9d popf
>Code; c013ba5d No symbols available
> 13: 8b 00 mov (%eax),%eax
>
>This must be the reason why ipmitool crashes.
>
>Holger
>
>
next prev parent reply other threads:[~2004-06-16 20:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.58.R0405040649310.15047@praktifix.dwd.de>
2004-05-25 16:53 ` IPMI hangup in 2.6.6-rc3 Philipp Matthias Hahn
2004-06-04 20:59 ` Corey Minyard
2004-06-10 17:12 ` Alex Williamson
2004-06-16 12:32 ` Holger Kiehl
2004-06-16 14:19 ` Corey Minyard
2004-06-16 14:21 ` Corey Minyard
2004-06-16 14:44 ` Alex Williamson
2004-06-16 18:30 ` Holger Kiehl
2004-06-16 18:56 ` Holger Kiehl
2004-06-16 20:42 ` Corey Minyard [this message]
2004-06-16 20:54 ` Alex Williamson
2004-06-17 7:03 ` Holger Kiehl
2004-05-04 7:05 Holger Kiehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40D0B0D1.60804@acm.org \
--to=minyard@acm.org \
--cc=Holger.Kiehl@dwd.de \
--cc=alex.williamson@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pmhahn@titan.lahn.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox