public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* 2.6.7 shows blank screen during boot with Radeon 9600 Mobility
@ 2004-06-17 12:12 Johannes Bauer
  0 siblings, 0 replies; 2+ messages in thread
From: Johannes Bauer @ 2004-06-17 12:12 UTC (permalink / raw)
  To: linux-kernel

Hello NG,

I've updated to 2.6.7 today and noticed that the screen goes blank very 
soon during booting (I think after the ACPI statements, maybe the 
initialization of radeonfb?). 2.6.6 did not show this behaviour. Later, 
when the console font is being initialized, the screen comes back. 
Therefore I guess the font is there but the character set is just 
"blank". This is quite annoying as I cannot see, for example, if there's 
any fschk going on.

I'm using an Acer Travelmate 291 LMi (subtype of the 290) which has an 
ATI Radeon 9600 Mobility graphics adapter built-in.

My lspci (for a quick overview):
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O 
Controller (rev 21)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller 
(rev 21)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI 
Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller 
(rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA 
Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) 
AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller 
(rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 
[Mobility Radeon 9600 M10]
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B 
Mini PCI Adapter (rev 04)
0000:02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus 
Controller (rev 01)
0000:03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 
802.11abg NIC (rev 01)

And lspci -v -v:
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O 
Controller (rev 21)
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
         Latency: 0
         Region 0: Memory at b0000000 (32-bit, prefetchable)
         Capabilities: [e4] #09 [4104]
         Capabilities: [a0] AGP version 2.0
                 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- 
FW- Rate=x2

0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller 
(rev 21) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 128
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
         I/O behind bridge: 0000c000-0000dfff
         Memory behind bridge: e0000000-efffffff
         Prefetchable memory behind bridge: a0000000-afffffff
         Expansion ROM at 0000c000 [disabled] [size=8K]
         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 
03) (prog-if 00 [UHCI])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin A routed to IRQ 10
         Region 4: I/O ports at 1200 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 
03) (prog-if 00 [UHCI])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin B routed to IRQ 10
         Region 4: I/O ports at 1600 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 
03) (prog-if 00 [UHCI])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin C routed to IRQ 10
         Region 4: I/O ports at 1700 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI 
Controller (rev 03) (prog-if 20 [EHCI])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin D routed to IRQ 10
         Region 0: Memory at f4000000 (32-bit, non-prefetchable)
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [58] #0a [2080]

0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83) 
(prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR+
         Latency: 0
         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
         I/O behind bridge: 0000a000-0000bfff
         Memory behind bridge: d0000000-dfffffff
         Prefetchable memory behind bridge: 90000000-9fffffff
         BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller 
(rev 03)
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA 
Storage Controller (rev 03) (prog-if 8a [Master SecP PriP])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at <unassigned>
         Region 1: I/O ports at <unassigned>
         Region 2: I/O ports at <unassigned>
         Region 3: I/O ports at <unassigned>
         Region 4: I/O ports at 1100 [size=16]
         Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin B routed to IRQ 10
         Region 4: I/O ports at 1400 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) 
AC'97 Audio Controller (rev 03)
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0
         Interrupt: pin B routed to IRQ 10
         Region 0: I/O ports at e000
         Region 1: I/O ports at e100 [size=64]
         Region 2: Memory at f0000400 (32-bit, non-prefetchable) [size=512]
         Region 3: Memory at f0000600 (32-bit, non-prefetchable) [size=256]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller 
(rev 03) (prog-if 00 [Generic])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin B routed to IRQ 10
         Region 0: I/O ports at e200
         Region 1: I/O ports at e300 [size=128]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 
[Mobility Radeon 9600 M10] (prog-if 00 [VGA])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 255 (2000ns min), cache line size 04
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at a8000000 (32-bit, prefetchable)
         Region 1: I/O ports at c100 [size=256]
         Region 2: Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
         Capabilities: [58] AGP version 2.0
                 Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- 
FW- Rate=<none>
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 80) (prog-if 10 [OHCI])
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 128 (8000ns max), cache line size 04
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at d0001800 (32-bit, non-prefetchable)
         Region 1: I/O ports at a100 [size=128]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 128 (8000ns min, 16000ns max)
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at a000
         Region 1: Memory at d0001000 (32-bit, non-prefetchable) [size=256]
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B 
Mini PCI Adapter (rev 04)
         Subsystem: Intel Corp. MIM2000/Centrino
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 128 (500ns min, 8500ns max)
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at d0000000 (32-bit, non-prefetchable)
         Capabilities: [dc] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-

0000:02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus 
Controller (rev 01)
         Subsystem: Acer Incorporated [ALI]: Unknown device 005a
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 168, cache line size 20
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at 90100000 (32-bit, non-prefetchable)
         Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
         Memory window 0: 20400000-207ff000 (prefetchable)
         Memory window 1: 20800000-20bff000
         I/O window 0: 00004000-000040ff
         I/O window 1: 00004400-000044ff
         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- 
PostWrite+
         16-bit legacy interface ports at 0001

0000:03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 
802.11abg NIC (rev 01)
         Subsystem: PROXIM Inc: Unknown device aa40
         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at 20800000 (32-bit, non-prefetchable) [disabled]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-


My kernel config:
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_TABLE=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_PCMCIA=y
CONFIG_YENTA=y
CONFIG_CARDBUS=y
CONFIG_PCMCIA_PROBE=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_FW_LOADER=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_QLA2XXX=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_RAWIO=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_NETFILTER=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
CONFIG_IRTTY_SIR=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
CONFIG_NET_RADIO=y
CONFIG_HERMES=m
CONFIG_NET_WIRELESS=y
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_RTC=y
CONFIG_AGP=m
CONFIG_AGP_ATI=m
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_FB=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_INTEL8X0=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_TIGL=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_CODA_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_AES=y
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_STD_RESOURCES=y
CONFIG_PC=y

Greetings,
Joe

-- 
"Je ein Stueckchen Kreppsohle an die Fuesse eines Hamsters kleben. Das
Laufrad des Hamsterkaefigs mit Kunststoffteppich auskleiden. Nach 15 bis
20 Minuten Betrieb ist der Elektroschocker geladen und bereit zur
Anwendung."                           Mirko Liss in de.sci.electronics


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: 2.6.7 shows blank screen during boot with Radeon 9600 Mobility
       [not found] <2842i-3m8-23@gated-at.bofh.it>
@ 2004-06-26 16:32 ` Johannes Bauer
  0 siblings, 0 replies; 2+ messages in thread
From: Johannes Bauer @ 2004-06-26 16:32 UTC (permalink / raw)
  To: linux-kernel

Hi,

I found another laptop showing the _exact_ symptoms, as soon as

Device Drivers  --->
	Graphics support  --->
		[*] Support for frame buffer devices
		<*>   ATI Radeon display support

is being enabled. This _definitely_ is a kernel bug, as it works with 
2.6.6 just fine. Here's the other laptop's lspci:

ruedilap [~]: lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host 
& Memory & AGP Controller (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual 
PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL 
Media IO] (rev 14)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] 
FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem 
Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems 
[SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 
Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 
SiS900 PCI Fast Ethernet (rev 91)
0000:00:08.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 
[Mobility Radeon 9600 M10]
ruedilap [~]: lspci -v -v
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host 
& Memory & AGP Controller (rev 01)
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
         Latency: 64
         Region 0: Memory at dc000000 (32-bit, non-prefetchable)
         Capabilities: [c0] AGP version 2.0
                 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- 
FW- Rate=<none>

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual 
PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 64
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         I/O behind bridge: 0000a000-0000afff
         Memory behind bridge: d7e00000-d7efffff
         Prefetchable memory behind bridge: c7c00000-d7cfffff
         Expansion ROM at 0000a000 [disabled] [size=4K]
         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL 
Media IO] (rev 14)
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin B routed to IRQ 5
         Region 4: I/O ports at 0c00 [size=32]

0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] 
FireWire Controller (prog-if 10 [OHCI])
         Subsystem: Uniwill Computer Corp: Unknown device 7007
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (1000ns min, 3000ns max)
         Interrupt: pin B routed to IRQ 5
         Region 0: Memory at dbfff000 (32-bit, non-prefetchable) 
[size=dbfc0000]
         Expansion ROM at 00020000 [disabled]
         Capabilities: [64] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME+

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 
(prog-if 80 [Master])
         Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE 
Controller (A,B step)
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 128
         Region 4: I/O ports at ff00 [size=16]

0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem 
Controller (rev a0) (prog-if 00 [Generic])
         Subsystem: Uniwill Computer Corp: Unknown device 4003
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (13000ns min, 2750ns max)
         Interrupt: pin C routed to IRQ 10
         Region 0: I/O ports at d400
         Region 1: I/O ports at d000 [size=128]
         Capabilities: [48] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems 
[SiS] Sound Controller (rev a0)
         Subsystem: Uniwill Computer Corp: Unknown device 5203
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (13000ns min, 2750ns max)
         Interrupt: pin C routed to IRQ 10
         Region 0: I/O ports at dc00
         Region 1: I/O ports at d800 [size=128]
         Capabilities: [48] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f) (prog-if 10 [OHCI])
         Subsystem: Uniwill Computer Corp: Unknown device 7001
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (20000ns max), cache line size 08
         Interrupt: pin A routed to IRQ 10
         Region 0: Memory at dbffb000 (32-bit, non-prefetchable)

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f) (prog-if 10 [OHCI])
         Subsystem: Uniwill Computer Corp: Unknown device 7001
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (20000ns max), cache line size 08
         Interrupt: pin B routed to IRQ 10
         Region 0: Memory at dbffc000 (32-bit, non-prefetchable)

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f) (prog-if 10 [OHCI])
         Subsystem: Uniwill Computer Corp: Unknown device 7001
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (20000ns max), cache line size 08
         Interrupt: pin C routed to IRQ 5
         Region 0: Memory at dbffd000 (32-bit, non-prefetchable)

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 
Controller (prog-if 20 [EHCI])
         Subsystem: Uniwill Computer Corp: Unknown device 7002
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (20000ns max)
         Interrupt: pin D routed to IRQ 11
         Region 0: Memory at dbffe000 (32-bit, non-prefetchable)
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 
SiS900 PCI Fast Ethernet (rev 91)
         Subsystem: Uniwill Computer Corp: Unknown device 5002
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (13000ns min, 2750ns max)
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at cc00 [size=dbfa0000]
         Region 1: Memory at dbffa000 (32-bit, non-prefetchable) [size=4K]
         Expansion ROM at 00020000 [disabled]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:08.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
         Subsystem: Uniwill Computer Corp: Unknown device 3000
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B-
         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 168
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at 20000000 (32-bit, non-prefetchable)
         Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
         Memory window 0: 20400000-207ff000 (prefetchable)
         Memory window 1: 20800000-20bff000
         I/O window 0: 00004000-000040ff
         I/O window 1: 00004400-000044ff
         BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- 
PostWrite+
         16-bit legacy interface ports at 0001

0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 
[Mobility Radeon 9600 M10] (prog-if 00 [VGA])
         Subsystem: Uniwill Computer Corp: Unknown device 2314
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (2000ns min), cache line size 08
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at c8000000 (32-bit, prefetchable)
         Region 1: I/O ports at a800 [size=256]
         Region 2: Memory at d7ef0000 (32-bit, non-prefetchable) [size=64K]
         Capabilities: [58] AGP version 2.0
                 Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- 
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- 
FW- Rate=<none>
         Capabilities: [50] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

ruedilap [~]:

Greetings,
Joe

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-06-26 16:32 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-17 12:12 2.6.7 shows blank screen during boot with Radeon 9600 Mobility Johannes Bauer
     [not found] <2842i-3m8-23@gated-at.bofh.it>
2004-06-26 16:32 ` Johannes Bauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox