From: Bjoern Schmidt <bj-schmidt@uni-paderborn.de>
To: linux-kernel@vger.kernel.org
Subject: Re: Via-Rhine ethernet driver problem?
Date: Fri, 18 Jun 2004 21:34:14 +0200 [thread overview]
Message-ID: <40D343B6.4010302@uni-paderborn.de> (raw)
In-Reply-To: <40685BC9.1040902@myrealbox.com>
walt wrote:
[...]
> I also discovered by using 'scp' to copy files between machines that the
> bad
> performance is assymetrical: copying a file *to* this machine runs at
> about
> half-speed (5 MB/sec) whereas copying a file *from* this machine runs at
> 45 KiloB/sec, about one percent of expected.
I have exactly the same problem on a asrock k7vt2 with VIA's Rhine II:
megabyte:~# uname -a
Linux megabyte 2.6.7 #1 Fri Jun 18 20:37:37 CEST 2004 i686 GNU/Linux
=================================================================
megabyte:~# lspci -v
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine-II]
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at dc00
Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
==================================================================
up down
100baseTx-FD: ~45 kB/s ~100 MBit/s
100baseTx: ~45 kB/s ~100 MBit/s
10baseT-FD: ~45 kB/s ~10 MBit/s
10baseT: ~10 MBit/s ~10 MBit/s
--
Greetings
Bjoern Schmidt
prev parent reply other threads:[~2004-06-18 19:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-29 17:24 Via-Rhine ethernet driver problem? walt
2004-03-29 18:36 ` Roger Luethi
2004-03-30 13:02 ` walt
2004-03-29 18:40 ` Janne Pikkarainen
2004-06-18 19:34 ` Bjoern Schmidt [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40D343B6.4010302@uni-paderborn.de \
--to=bj-schmidt@uni-paderborn.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox