2.6.7-bk way too fast

2.6.7-bk way too fast

[Jeff Garzik]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]


Something is definitely screwy with the latest -bk.  I updated from a 
kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
increased rate.  My guess is twice as fast.  Most annoying is the system 
clock advances at twice normal rate, and keyboard repeat is so sensitive 
I am spending quite a bit of time typing this message, what with having 
to delettte (<== example) extra characters.  Double-clicking is also 
broken :(

dmesg and config attached.

My guess would be someone broke HPET, but maybe not judging from other 
lkml reports.

This is the _first_ 2.6 kernel that has been obviously and wildly broken 
for me :(

	Jeff




[-- Attachment #2: config.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 5653 bytes --]

[-- Attachment #3: dmesg.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 5710 bytes --]

Re: 2.6.7-bk way too fast

[Ricky Beam]

On Sun, 20 Jun 2004, Jeff Garzik wrote:
>Something is definitely screwy with the latest -bk.

I'm not seeing any troubles...

[root:pts/11{4}]spork:~/[11:26 PM]:uname -a
Linux spork.troz.com 2.6.7-SMP+BK@1.1400 #15 SMP BK[20040618194307] Fri Jun 18 15:56:38 EDT 2004 x86_64 x86_64 x86_64 GNU/Linux

time.c: Using 1.193182 MHz PIT timer.

>My guess would be someone broke HPET, but maybe not judging from other
>lkml reports.

It could be.  All my systems have an HPET enabled kernel, but none of them
are actually reporting HPET as a timing source.

--Ricky

Re: 2.6.7-bk way too fast

[Felipe Alfaro Solana]

On Sun, 2004-06-20 at 23:29 -0400, Ricky Beam wrote:
> On Sun, 20 Jun 2004, Jeff Garzik wrote:
> >Something is definitely screwy with the latest -bk.
> 
> I'm not seeing any troubles...

I'm only seeing this behavior in one of my machines. One is a laptop,
which doesn't suffer from this slew, the other one is a desktop system,
which suffers from it. Both are using ACPI, but only the desktop system
is usign APIC/IO-APIC.

I can post both configs, if useful.

Re: 2.6.7-bk way too fast

[Vojtech Pavlik]

On Sun, Jun 20, 2004 at 11:29:04PM -0400, Ricky Beam wrote:
> On Sun, 20 Jun 2004, Jeff Garzik wrote:
> >Something is definitely screwy with the latest -bk.
> 
> I'm not seeing any troubles...
> 
> [root:pts/11{4}]spork:~/[11:26 PM]:uname -a
> Linux spork.troz.com 2.6.7-SMP+BK@1.1400 #15 SMP BK[20040618194307] Fri Jun 
> 18 15:56:38 EDT 2004 x86_64 x86_64 x86_64 GNU/Linux
> 
> time.c: Using 1.193182 MHz PIT timer.
> 
> >My guess would be someone broke HPET, but maybe not judging from other
> >lkml reports.
> 
> It could be.  All my systems have an HPET enabled kernel, but none of them
> are actually reporting HPET as a timing source.
 
x86-64 has a different HPET driver than i386. And HPET is only used when
present in the machine (so far only AMD chipsets), _and_ reported by the
ACPI BIOS. Which is rather uncommon.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR

Re: 2.6.7-bk way too fast

[David Woodhouse]

On Mon, 2004-06-21 at 10:23 +0200, Vojtech Pavlik wrote:
> x86-64 has a different HPET driver than i386. And HPET is only used when
> present in the machine (so far only AMD chipsets), _and_ reported by the
> ACPI BIOS. Which is rather uncommon.

If we know which chipsets have it, why would we refrain from using it
just because the BIOS doesn't report it?

-- 
dwmw2

Re: 2.6.7-bk way too fast

[Vojtech Pavlik]

On Fri, Jul 02, 2004 at 08:53:16AM +0100, David Woodhouse wrote:
> On Mon, 2004-06-21 at 10:23 +0200, Vojtech Pavlik wrote:
> > x86-64 has a different HPET driver than i386. And HPET is only used when
> > present in the machine (so far only AMD chipsets), _and_ reported by the
> > ACPI BIOS. Which is rather uncommon.
> 
> If we know which chipsets have it, why would we refrain from using it
> just because the BIOS doesn't report it?
 
Because it doesn't have resources allocated, and we don't know which
memory range is free to use so early at boottime.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR

Re: 2.6.7-bk way too fast

[Jeff Garzik]

Jeff Garzik wrote:
> 
> Something is definitely screwy with the latest -bk.  I updated from a 
> kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> increased rate.  My guess is twice as fast.  Most annoying is the system 
> clock advances at twice normal rate, and keyboard repeat is so sensitive 
> I am spending quite a bit of time typing this message, what with having 
> to delettte (<== example) extra characters.  Double-clicking is also 
> broken :(

Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset now...

	Jeff

Re: 2.6.7-bk way too fast

[Matt H.]

Jeff, 

I believe it was already narrowed down by Hans-Frieder Vogt, see  
http://marc.theaimsgroup.com/?l=linux-kernel&m=108774225111967&w=2


Matt H.


On Sunday 20 June 2004 8:36 pm, Jeff Garzik wrote:
> Jeff Garzik wrote:
> > Something is definitely screwy with the latest -bk.  I updated from a
> > kernel ~1 week ago, and all timer-related stuff is moving at a vastly
> > increased rate.  My guess is twice as fast.  Most annoying is the system
> > clock advances at twice normal rate, and keyboard repeat is so sensitive
> > I am spending quite a bit of time typing this message, what with having
> > to delettte (<== example) extra characters.  Double-clicking is also
> > broken :(
>
> Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset now...
>
> 	Jeff
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.7-bk way too fast

[Marcel Holtmann]

Hi,

> I believe it was already narrowed down by Hans-Frieder Vogt, see  
> http://marc.theaimsgroup.com/?l=linux-kernel&m=108774225111967&w=2

this one fixes it for me, too. I had to replaces x86_64 with i386, but
actually this is obvious.

Regards

Marcel

Re: 2.6.7-bk way too fast

[Zwane Mwaikambo]

On Sun, 20 Jun 2004, Jeff Garzik wrote:

> Jeff Garzik wrote:
> >
> > Something is definitely screwy with the latest -bk.  I updated from a
> > kernel ~1 week ago, and all timer-related stuff is moving at a vastly
> > increased rate.  My guess is twice as fast.  Most annoying is the system
> > clock advances at twice normal rate, and keyboard repeat is so sensitive
> > I am spending quite a bit of time typing this message, what with having
> > to delettte (<== example) extra characters.  Double-clicking is also
> > broken :(
>
> Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset now...

My suspect is;

ChangeSet 1.1731 2004/06/18 01:56:40 len.brown@intel.com
  Merge intel.com:/home/lenb/src/linux-acpi-test-2.6.7
  into intel.com:/home/lenb/bk/linux-acpi-test-2.6.7

Re: 2.6.7-bk way too fast

[Zwane Mwaikambo]

On Sun, 20 Jun 2004, Zwane Mwaikambo wrote:

> On Sun, 20 Jun 2004, Jeff Garzik wrote:
>
> > Jeff Garzik wrote:
> > >
> > > Something is definitely screwy with the latest -bk.  I updated from a
> > > kernel ~1 week ago, and all timer-related stuff is moving at a vastly
> > > increased rate.  My guess is twice as fast.  Most annoying is the system
> > > clock advances at twice normal rate, and keyboard repeat is so sensitive
> > > I am spending quite a bit of time typing this message, what with having
> > > to delettte (<== example) extra characters.  Double-clicking is also
> > > broken :(
> >
> > Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset now...
>
> My suspect is;
>
> ChangeSet 1.1731 2004/06/18 01:56:40 len.brown@intel.com
>   Merge intel.com:/home/lenb/src/linux-acpi-test-2.6.7
>   into intel.com:/home/lenb/bk/linux-acpi-test-2.6.7

Make that;

ChangeSet 1.1608.11.12 2004/06/18 00:18:19 len.brown@intel.com
  [ACPI] handle SCI override to nth IOAPIC
  http://bugzilla.kernel.org/show_bug.cgi?id=2835
arch/i386/kernel/mpparse.c 1.72.1.1 2004/06/17 20:18:02 len.brown@intel.com
  handle SCI override to nth IOAPIC

Re: 2.6.7-bk way too fast

[Andrew Morton]

Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Jeff Garzik wrote:
> > 
> > Something is definitely screwy with the latest -bk.  I updated from a 
> > kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> > increased rate.  My guess is twice as fast.  Most annoying is the system 
> > clock advances at twice normal rate, and keyboard repeat is so sensitive 
> > I am spending quite a bit of time typing this message, what with having 
> > to delettte (<== example) extra characters.  Double-clicking is also 
> > broken :(
> 
> Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset now...
> 

Try this.


--- 25/arch/i386/kernel/mpparse.c~i386-double-clock-speed-fix	2004-06-20 18:04:47.409952912 -0700
+++ 25-akpm/arch/i386/kernel/mpparse.c	2004-06-20 18:05:13.034057456 -0700
@@ -1017,7 +1017,8 @@ void __init mp_config_acpi_legacy_irqs (
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
+				(mp_irqs[idx].mpc_dstapic ==
+					mp_ioapics[ioapic].mpc_apicid) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;
_

Re: 2.6.7-bk way too fast

[Norberto Bensa]

Andrew Morton wrote:
> > Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset
> > now...
>
> Try this.
>
>
>  		for (idx = 0; idx < mp_irq_entries; idx++)
>  			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
> -				(mp_irqs[idx].mpc_dstapic == ioapic) &&
> +				(mp_irqs[idx].mpc_dstapic ==
> +					mp_ioapics[ioapic].mpc_apicid) &&

Still goes too fast :-( (tried on 2.6.7-mm1)

Regards,
Norberto

Re: 2.6.7-bk way too fast

[Norberto Bensa]

[-- Attachment #1: Type: text/plain, Size: 595 bytes --]

Norberto Bensa wrote:
> Andrew Morton wrote:
> > > Looks like disabling CONFIG_ACPI fixes things.  Narrowing down cset
> > > now...
> >
> > Try this.
> >
> >
> >  		for (idx = 0; idx < mp_irq_entries; idx++)
> >  			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
> > -				(mp_irqs[idx].mpc_dstapic == ioapic) &&
> > +				(mp_irqs[idx].mpc_dstapic ==
> > +					mp_ioapics[ioapic].mpc_apicid) &&
>
> Still goes too fast :-( (tried on 2.6.7-mm1)

Attaaached,    ..cooonfiig  and   dmmesssg.  Note:   iit''s   
waaaaaaaaaaaaaaay    too     fffasssst  on X.  Text moode    termiinall   
it''ss  oook.


[-- Attachment #2: 2.6.7-mm1.config --]
[-- Type: text/plain, Size: 29151 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_IOSCHED_NOOP is not set
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_USE_VECTOR=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=2048
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=2048
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=2048
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_RAW=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y

[-- Attachment #3: 2.6.7-mm1.dmesg --]
[-- Type: text/plain, Size: 10636 bytes --]

Linux version 2.6.7-mm1 (root@venkman) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #4 Mon Jun 21 01:48:55 ART 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f7e90
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Built 1 zonelists
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: vga=0x030c quiet
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1000.264 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 132x60
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 516432k/524224k available (1141k kernel code, 7040k reserved, 624k data, 116k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1970.17 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.0903 MHz.
..... host bus clock speed is 133.0320 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ5 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbec0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbee8, dseg 0xf0000
PnPBIOS: 11 nodes reported by PnP BIOS; 11 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG CD-R/RW DRIVE SW-208F, ATAPI CD/DVD-ROM drive
hdb: Pioneer DVD-ROM ATAPIModel DVD-114 0124, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QUANTUM FIREBALLP AS20.5, ATA DISK drive
hdd: ST330630A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100)
hdc: cache flushes supported
 /dev/ide/host0/bus1/target0/lun0: p1 < p5 p6 p7 p8 p9 p10 >
hdd: max request size: 128KiB
hdd: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66)
hdd: cache flushes supported
 /dev/ide/host0/bus1/target1/lun0: p1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ReiserFS: hdc9: found reiserfs format "3.6" with standard journal
ReiserFS: hdc9: using ordered data mode
ReiserFS: hdc9: journal params: device hdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc9: checking transaction log (hdc9)
ReiserFS: hdc9: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 116k freed
NET: Registered protocol family 1
Adding 265032k swap on /dev/discs/disc0/part6.  Priority:-1 extents:1
SCSI subsystem initialized
hda: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid0 personality registered as nr 2
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
usb 1-1: new full speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-2: new full speed USB device using address 3
md: raidstart(pid 5226) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
md: autorun ...
md: considering hdc10 ...
md:  adding hdc10 ...
md:  adding hdd1 ...
md: created md0
md: bind<hdd1>
md: bind<hdc10>
md: running: <hdc10><hdd1>
md0: setting max_sectors to 64, segment boundary to 16383
raid0: looking at hdc10
raid0:   comparing hdc10(17470592) with hdc10(17470592)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at hdd1
raid0:   comparing hdd1(29880768) with hdc10(17470592)
raid0:   NOT EQUAL
raid0:   comparing hdd1(29880768) with hdd1(29880768)
raid0:   END
raid0:   ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 1
raid0: checking hdd1 ... contained as device 0
  (29880768) is smallest!.
raid0: checking hdc10 ... nope.
raid0: zone->nb_dev: 1, size: 12410176
raid0: current zone offset: 29880768
raid0: done.
raid0 : md_size is 47351360 blocks.
raid0 : conf->hash_spacing is 34941184 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
usb 1-1.2: new low speed USB device using address 4
ReiserFS: hdc7: found reiserfs format "3.6" with standard journal
ReiserFS: hdc7: using ordered data mode
ReiserFS: hdc7: journal params: device hdc7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc7: checking transaction log (hdc7)
input: Microsoft Microsoft IntelliMouse® Explorer on usb-0000:00:07.2-1.2
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ReiserFS: hdc7: Using r5 hash to sort names
ReiserFS: hdc8: found reiserfs format "3.6" with standard journal
ReiserFS: hdc8: using ordered data mode
ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc8: checking transaction log (hdc8)
ReiserFS: hdc8: Using r5 hash to sort names
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem md0
Ending clean XFS mount for filesystem: md0
Real Time Clock Driver v1.12
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12
eth0: RealTek RTL8139 at 0xdc00, 00:e0:7d:9f:1f:90, IRQ 12
eth0:  Identified 8139 chip type 'RTL-8139C'
NET: Registered protocol family 17
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-5336  Wed Jan 14 18:29:26 PST 2004
Linux agpgart interface v0.100 (c) Dave Jones
0: NVRM: AGPGART: unable to retrieve symbol table
inserting floppy driver for 2.6.7-mm1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077

Re: 2.6.7-bk way too fast

[Linus Torvalds]

On Mon, 21 Jun 2004, Norberto Bensa wrote:
> 
> Attaaached,    ..cooonfiig  and   dmmesssg.  Note:   iit''s   
> waaaaaaaaaaaaaaay    too     fffasssst  on X.  Text moode    termiinall   
> it''ss  oook.

Does it fix it to just remove that one line completely?

Like this..

		Linus

---
--- 1.76/arch/i386/kernel/mpparse.c	Fri Jun 18 09:29:48 2004
+++ edited/arch/i386/kernel/mpparse.c	Sun Jun 20 23:14:12 2004
@@ -1017,7 +1017,6 @@
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;

Re: 2.6.7-bk way too fast

[Clemens Schwaighofer]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Linus Torvalds wrote:
|
| On Mon, 21 Jun 2004, Norberto Bensa wrote:
|
|>Attaaached,    ..cooonfiig  and   dmmesssg.  Note:   iit''s
|>waaaaaaaaaaaaaaay    too     fffasssst  on X.  Text moode    termiinall
|>it''ss  oook.
|
|
| Does it fix it to just remove that one line completely?

Neither the first one or removing the line fixes it. My mail pingu in
gkrellm is still running as he would be totaly on drugs ...

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703            Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1ojRjBz/yQjBxz8RAkB1AJ44FOG/3bKxIXBwYI6VB5xxb/kWSQCeJdum
sfPLFlxN2NFcThGrgMkLMpg=
=1Fq9
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Matt H.]

I can confirm simular behavior here. I loaded 2.6.7-mm1 tonite  and  tried  
Andrew's  patch ( which didn't work ) and then Linus's  ( which also didn't 
work ).

Matt H.

On Monday 21 June 2004 12:05 am, Clemens Schwaighofer wrote:
> Linus Torvalds wrote:
> | On Mon, 21 Jun 2004, Norberto Bensa wrote:
> |>Attaaached,    ..cooonfiig  and   dmmesssg.  Note:   iit''s
> |>waaaaaaaaaaaaaaay    too     fffasssst  on X.  Text moode    termiinall
> |>it''ss  oook.
> |
> | Does it fix it to just remove that one line completely?
>
> Neither the first one or removing the line fixes it. My mail pingu in
> gkrellm is still running as he would be totaly on drugs ...

Re: 2.6.7-bk way too fast

[Andrew Morton]

"Matt H." <lkml@lpbproductions.com> wrote:
>
> I can confirm simular behavior here. I loaded 2.6.7-mm1 tonite  and  tried  
> Andrew's  patch ( which didn't work ) and then Linus's  ( which also didn't 
> work ).
> 

hm.  This worked for me.  Could you double-check?


diff -puN arch/i386/kernel/mpparse.c~double-clock-speed-fix arch/i386/kernel/mpparse.c
--- 25/arch/i386/kernel/mpparse.c~double-clock-speed-fix	2004-06-20 23:28:16.655299120 -0700
+++ 25-akpm/arch/i386/kernel/mpparse.c	2004-06-20 23:28:20.468719392 -0700
@@ -1017,7 +1017,6 @@ void __init mp_config_acpi_legacy_irqs (
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;
diff -puN arch/x86_64/kernel/mpparse.c~double-clock-speed-fix arch/x86_64/kernel/mpparse.c
--- 25/arch/x86_64/kernel/mpparse.c~double-clock-speed-fix	2004-06-20 23:28:16.672296536 -0700
+++ 25-akpm/arch/x86_64/kernel/mpparse.c	2004-06-20 23:28:20.469719240 -0700
@@ -861,7 +861,6 @@ void __init mp_config_acpi_legacy_irqs (
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;
_

Re: 2.6.7-bk way too fast

[Matt H.]

I tried from a fresh  2.6.7-mm1 tree  with your patch ( I had to fix up the 
2nd half of your patch by hand since  it wouldve rejected ).  The results 
were the same though. 

Matt H.

On Monday 21 June 2004 12:16 am, Andrew Morton wrote:
> "Matt H." <lkml@lpbproductions.com> wrote:
> > I can confirm simular behavior here. I loaded 2.6.7-mm1 tonite  and 
> > tried Andrew's  patch ( which didn't work ) and then Linus's  ( which
> > also didn't work ).
>
> hm.  This worked for me.  Could you double-check?
>
>
> diff -puN arch/i386/kernel/mpparse.c~double-clock-speed-fix
> arch/i386/kernel/mpparse.c ---
> 25/arch/i386/kernel/mpparse.c~double-clock-speed-fix	2004-06-20
> 23:28:16.655299120 -0700 +++ 25-akpm/arch/i386/kernel/mpparse.c	2004-06-20
> 23:28:20.468719392 -0700 @@ -1017,7 +1017,6 @@ void __init
> mp_config_acpi_legacy_irqs (
>
>  		for (idx = 0; idx < mp_irq_entries; idx++)
>  			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
> -				(mp_irqs[idx].mpc_dstapic == ioapic) &&
>  				(mp_irqs[idx].mpc_srcbusirq == i ||
>  				mp_irqs[idx].mpc_dstirq == i))
>  					break;
> diff -puN arch/x86_64/kernel/mpparse.c~double-clock-speed-fix
> arch/x86_64/kernel/mpparse.c ---
> 25/arch/x86_64/kernel/mpparse.c~double-clock-speed-fix	2004-06-20
> 23:28:16.672296536 -0700 +++
> 25-akpm/arch/x86_64/kernel/mpparse.c	2004-06-20 23:28:20.469719240 -0700 @@
> -861,7 +861,6 @@ void __init mp_config_acpi_legacy_irqs (
>
>  		for (idx = 0; idx < mp_irq_entries; idx++)
>  			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
> -				(mp_irqs[idx].mpc_dstapic == ioapic) &&
>  				(mp_irqs[idx].mpc_srcbusirq == i ||
>  				mp_irqs[idx].mpc_dstirq == i))
>  					break;
> _
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.7-bk way too fast

[Clemens Schwaighofer]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Matt H. wrote:
| I tried from a fresh  2.6.7-mm1 tree  with your patch ( I had to fix
up the
| 2nd half of your patch by hand since  it wouldve rejected ).  The results
| were the same though.

same for me. I just recomed from scratch and with ACPI debug on.

I also will check the "vanilla 2.6.7" kernel (is compiling right now).
but those ACPI changes are only in the mm tree as I can see

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703            Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1poZjBz/yQjBxz8RAoIzAKDJDH0qKbO5Ao1N8kZ2sje3YjiR4gCeOUi6
ktvawWgPIZpnT1cv10Cz8Zk=
=q4bT
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Clemens Schwaighofer]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Clemens Schwaighofer wrote:
| Matt H. wrote:
| | I tried from a fresh  2.6.7-mm1 tree  with your patch ( I had to fix
| up the
| | 2nd half of your patch by hand since  it wouldve rejected ).  The
results
| | were the same though.
|
| same for me. I just recomed from scratch and with ACPI debug on.
|
| I also will check the "vanilla 2.6.7" kernel (is compiling right now).
| but those ACPI changes are only in the mm tree as I can see

the vanilla 2.6.7 doesn't show this fast-clock problems.

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703            Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1qmUjBz/yQjBxz8RAuIlAKDkIn/jZrHiAYdrXJNhSYTQuSxxyQCfebWo
jRoDhEplMB1SLE5BRTv/LKE=
=IHBr
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Felipe Alfaro Solana]

On Mon, 2004-06-21 at 17:20 +0900, Clemens Schwaighofer wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Matt H. wrote:
> | I tried from a fresh  2.6.7-mm1 tree  with your patch ( I had to fix
> up the
> | 2nd half of your patch by hand since  it wouldve rejected ).  The results
> | were the same though.
> 
> same for me. I just recomed from scratch and with ACPI debug on.
> 
> I also will check the "vanilla 2.6.7" kernel (is compiling right now).
> but those ACPI changes are only in the mm tree as I can see

AFAIK, those ACPI changes where introduced at 2.6.7-bk2.

Re: 2.6.7-bk way too fast

[Linus Torvalds]

On Mon, 21 Jun 2004, Clemens Schwaighofer wrote:
> |
> | Does it fix it to just remove that one line completely?
> 
> Neither the first one or removing the line fixes it. My mail pingu in
> gkrellm is still running as he would be totaly on drugs ...

Ok, either we have two bugs with _exactly_ the same behaviour, or 
something is just getting screwed up. That single change has definitely 
been fingered as being the problem by a few people. And removing the one 
line (if you have an x86-64 system you have to remove it in the x86-64 
version of the file too) should undo the patch that seems to have caused 
the problem in the first place.

Anyway, my one-liner patch won't have applied at all if you had applied 
Andrew's patch, so the first thing to do is to double-check that it 
actually got applied. I'm still hoping. But assuming it did, can you 
enable APIC debugging in include/asm-i386/apic.h, and send the resulting 
honking huge dmesg to me and the other suspects in this on-going saga? 

Preferably both from a plain 2.6.7 kernel (well, "plain" except for the 
DEBUG enable) and from the broken kernel..

		Linus

Re: 2.6.7-bk way too fast

[Jeff Sipek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 21 June 2004 03:37, Linus Torvalds wrote:
> Ok, either we have two bugs with _exactly_ the same behaviour, or
> something is just getting screwed up. That single change has definitely
> been fingered as being the problem by a few people. And removing the one
> line (if you have an x86-64 system you have to remove it in the x86-64
> version of the file too) should undo the patch that seems to have caused
> the problem in the first place.
>
> Anyway, my one-liner patch won't have applied at all if you had applied
> Andrew's patch, so the first thing to do is to double-check that it
> actually got applied. I'm still hoping. But assuming it did, can you
> enable APIC debugging in include/asm-i386/apic.h, and send the resulting
> honking huge dmesg to me and the other suspects in this on-going saga?
>
> Preferably both from a plain 2.6.7 kernel (well, "plain" except for the
> DEBUG enable) and from the broken kernel..

If you want the dmesgs, you can get them from 
http://shells.gnugeneration.com/~jeffpc/kernel/logs/.

The 'bad' one is before your patch, and the 'good' one is after your patch.

Jeff.

- -- 
We have joy, we have fun, we have Linux on a Sun...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1q/3wFP0+seVj/4RAmX8AJ9w/O8ZPFL0LuH/fqoA8nYBbpMBsQCfWe1N
U8WsaVMhFsT2og5BxmS6fjk=
=E2nb
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Jeff Sipek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 21 June 2004 05:52, Jeff Sipek wrote:
> On Monday 21 June 2004 03:37, Linus Torvalds wrote:
> If you want the dmesgs, you can get them from
> http://shells.gnugeneration.com/~jeffpc/kernel/logs/.
>
> The 'bad' one is before your patch, and the 'good' one is after your patch.

I should have checked the permissions of the files before I went to bed at 
6am. :-D It is fixed now.

Jeff.

- -- 
Once you have their hardware. Never give it back.
(The First Rule of Hardware Acquisition)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD4DBQFA1w/ZwFP0+seVj/4RAhI0AJ0bmp3SsypN0CxDXfADa1FicX3jSQCYloum
/YnpDiDPJCNVN5tfV8zq+A==
=lALW
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Jeff Sipek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 21 June 2004 02:16, Linus Torvalds wrote:
> On Mon, 21 Jun 2004, Norberto Bensa wrote:
> > Attaaached,    ..cooonfiig  and   dmmesssg.  Note:   iit''s
> > waaaaaaaaaaaaaaay    too     fffasssst  on X.  Text moode    termiinall
> > it''ss  oook.
>
> Does it fix it to just remove that one line completely?
>
> Like this..
>
> 		Linus

I didn't try Andrew's patch, but your fixes it on my laptop.

Jeff.

- -- 
Once you have their hardware. Never give it back.
(The First Rule of Hardware Acquisition)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1owHwFP0+seVj/4RAlqdAKCSNKjp2BP3q+hE7gkmdaOG45xeggCeKHWa
zKr9aTY4NXAPT24GSk2dtG8=
=NUoj
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Jeff Garzik]

Andrew Morton wrote:
> Try this.
> 
> 
> --- 25/arch/i386/kernel/mpparse.c~i386-double-clock-speed-fix	2004-06-20 18:04:47.409952912 -0700
> +++ 25-akpm/arch/i386/kernel/mpparse.c	2004-06-20 18:05:13.034057456 -0700
> @@ -1017,7 +1017,8 @@ void __init mp_config_acpi_legacy_irqs (
>  
>  		for (idx = 0; idx < mp_irq_entries; idx++)
>  			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
> -				(mp_irqs[idx].mpc_dstapic == ioapic) &&
> +				(mp_irqs[idx].mpc_dstapic ==
> +					mp_ioapics[ioapic].mpc_apicid) &&
>  				(mp_irqs[idx].mpc_srcbusirq == i ||
>  				mp_irqs[idx].mpc_dstirq == i))
>  					break;


ACK -- this patch fixes it for me, at least.

Thanks muchly,

	Jeff

Re: 2.6.7-bk way too fast

[Aubin LaBrosse]

[-- Attachment #1: Type: text/plain, Size: 1704 bytes --]

I hate to make this harder to track down but the extra keyboard
characters happens to me very rarely on 2.6.3-rc2-mm1 as well (been lazy
and haven't updated in a while...ok so i really should.)  - it isn't
happening now but every once in a while when i boot it will happen, and
usually it's very difficult to do anything at all because it will also
"super repeat" keys like the backspace key.  so i reboot it and all is
usually well.  it sounds like jeff's problem is much more prominent and
repeatable, i just wanted to make you guys aware that it could be
something that went in as early as 2.6.3, not just recent changes - it
definitely sounds as though it has been compounded now, though. it could
be totally unrelated to my issue too though because while my repeat rate
is hosed, i'm not noticing any other timer related breakage like the
system clock or anything.  

to advance the cause in whatever small way i can, i'm attaching the
config for this box


On Sun, 2004-06-20 at 22:54, Jeff Garzik wrote:
> Something is definitely screwy with the latest -bk.  I updated from a 
> kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> increased rate.  My guess is twice as fast.  Most annoying is the system 
> clock advances at twice normal rate, and keyboard repeat is so sensitive 
> I am spending quite a bit of time typing this message, what with having 
> to delettte (<== example) extra characters.  Double-clicking is also 
> broken :(
> 
> dmesg and config attached.
> 
> My guess would be someone broke HPET, but maybe not judging from other 
> lkml reports.
> 
> This is the _first_ 2.6 kernel that has been obviously and wildly broken 
> for me :(
> 
> 	Jeff
> 
> 
> 

[-- Attachment #2: laptop-config.bz2 --]
[-- Type: application/x-bzip, Size: 5320 bytes --]

Re: 2.6.7-bk way too fast

[Vojtech Pavlik]

On Sun, Jun 20, 2004 at 10:54:47PM -0400, Jeff Garzik wrote:

> Something is definitely screwy with the latest -bk.  I updated from a 
> kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> increased rate.  My guess is twice as fast.  Most annoying is the system 
> clock advances at twice normal rate, and keyboard repeat is so sensitive 
> I am spending quite a bit of time typing this message, what with having 
> to delettte (<== example) extra characters.  Double-clicking is also 
> broken :(

Q: Are you using the atkbd.softrepeat=1 parameter? Or an USB keyboard?
   If not, you shouldn't be getting faster repeats even if the timer
   were off, because the repat shoul be generated by the keyboard
   itself.

> dmesg and config attached.
> 
> My guess would be someone broke HPET, but maybe not judging from other 
> lkml reports.
> 
> This is the _first_ 2.6 kernel that has been obviously and wildly broken 
> for me :(

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR

Re: 2.6.7-bk way too fast

[Felipe Alfaro Solana]

On Mon, 2004-06-21 at 10:22 +0200, Vojtech Pavlik wrote:
> On Sun, Jun 20, 2004 at 10:54:47PM -0400, Jeff Garzik wrote:
> 
> > Something is definitely screwy with the latest -bk.  I updated from a 
> > kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> > increased rate.  My guess is twice as fast.  Most annoying is the system 
> > clock advances at twice normal rate, and keyboard repeat is so sensitive 
> > I am spending quite a bit of time typing this message, what with having 
> > to delettte (<== example) extra characters.  Double-clicking is also 
> > broken :(
> 
> Q: Are you using the atkbd.softrepeat=1 parameter? Or an USB keyboard?
>    If not, you shouldn't be getting faster repeats even if the timer
>    were off, because the repat shoul be generated by the keyboard
>    itself.

I'm using a PS/2 Microsoft Natural Keyboard Elite and I see the faster
typing rates only while in X. However, keyboard rate is normal while in
a text console.

Re: 2.6.7-bk way too fast

[Vojtech Pavlik]

On Mon, Jun 21, 2004 at 12:26:10PM +0200, Felipe Alfaro Solana wrote:

> > > Something is definitely screwy with the latest -bk.  I updated from a 
> > > kernel ~1 week ago, and all timer-related stuff is moving at a vastly 
> > > increased rate.  My guess is twice as fast.  Most annoying is the system 
> > > clock advances at twice normal rate, and keyboard repeat is so sensitive 
> > > I am spending quite a bit of time typing this message, what with having 
> > > to delettte (<== example) extra characters.  Double-clicking is also 
> > > broken :(
> > 
> > Q: Are you using the atkbd.softrepeat=1 parameter? Or an USB keyboard?
> >    If not, you shouldn't be getting faster repeats even if the timer
> >    were off, because the repat shoul be generated by the keyboard
> >    itself.
> 
> I'm using a PS/2 Microsoft Natural Keyboard Elite and I see the faster
> typing rates only while in X. However, keyboard rate is normal while in
> a text console.

It's possible that X does it's own autorepeat, though that'd rather
surprise me.

Can you check with showkey -s, and xev in X?

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR

Re: 2.6.7-bk way too fast

[Andrew Morton]

Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Something is definitely screwy with the latest -bk.

Would you believe that there is a totally separate bug in the latest -mm
which has exactly the same symptoms?

mark_offset_tsc() does

	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
		jiffies_64++;

which is doing abs(unsigned long).

Which works OK if abs() in a function, but I made it a macro.

This fixes it up.


diff -puN include/linux/kernel.h~abs-fix-fix include/linux/kernel.h
--- 25/include/linux/kernel.h~abs-fix-fix	2004-06-21 01:42:24.283873616 -0700
+++ 25-akpm/include/linux/kernel.h	2004-06-21 01:43:08.150204920 -0700
@@ -55,7 +55,12 @@ void __might_sleep(char *file, int line)
 #endif
 
 #define abs(x) ({				\
-		typeof(x) __x = (x);		\
+		int __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+#define labs(x) ({				\
+		long __x = (x);			\
 		(__x < 0) ? -__x : __x;		\
 	})
 
_

Re: 2.6.7-bk way too fast

[Matt H.]

Andrew,

That fixes it perfectly here, 

Thanks.

Matt H.

On Monday 21 June 2004 1:48 am, Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
> > Something is definitely screwy with the latest -bk.
>
> Would you believe that there is a totally separate bug in the latest -mm
> which has exactly the same symptoms?
>
> mark_offset_tsc() does
>
> 	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
> 		jiffies_64++;
>
> which is doing abs(unsigned long).
>
> Which works OK if abs() in a function, but I made it a macro.
>
> This fixes it up.
>
>
> diff -puN include/linux/kernel.h~abs-fix-fix include/linux/kernel.h
> --- 25/include/linux/kernel.h~abs-fix-fix	2004-06-21 01:42:24.283873616
> -0700 +++ 25-akpm/include/linux/kernel.h	2004-06-21 01:43:08.150204920
> -0700 @@ -55,7 +55,12 @@ void __might_sleep(char *file, int line)
>  #endif
>
>  #define abs(x) ({				\
> -		typeof(x) __x = (x);		\
> +		int __x = (x);			\
> +		(__x < 0) ? -__x : __x;		\
> +	})
> +
> +#define labs(x) ({				\
> +		long __x = (x);			\
>  		(__x < 0) ? -__x : __x;		\
>  	})
>
> _
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.7-bk way too fast

[Jeff Sipek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 21 June 2004 04:48, Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
> > Something is definitely screwy with the latest -bk.
>
> Would you believe that there is a totally separate bug in the latest -mm
> which has exactly the same symptoms?

Oh, then I guess my dmesg dumps are useless. :-)

Jeff.

- -- 
Note 96.3% of all statistics are fiction.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA1rDCwFP0+seVj/4RAvgLAJ9DT2AcxMmASrMPPMK1Jliml8VleACfZMWa
RKTYKIDCY77R0c0JPxIUiM8=
=mokM
-----END PGP SIGNATURE-----

Re: 2.6.7-bk way too fast

[Felipe Alfaro Solana]

[-- Attachment #1: Type: text/plain, Size: 362 bytes --]

On Mon, 2004-06-21 at 01:48 -0700, Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
> >
> > Something is definitely screwy with the latest -bk.
> 
> Would you believe that there is a totally separate bug in the latest -mm
> which has exactly the same symptoms?

Applying Andrew's two following patches solved my problems with time
skewing.

Thanks!

[-- Attachment #2: abs --]
[-- Type: text/plain, Size: 3624 bytes --]

>From linux-kernel-owner@vger.kernel.org Mon Jun 21 11:01:42 2004
Return-Path:
	<linux-kernel-owner+felipe_alfaro=40linuxmail.org-s266164abufuitj@vger.kernel.org>
Received: from kerberos.felipe-alfaro.com ([unix socket]) by
	kerberos.felipe-alfaro.com (Cyrus v2.2.3) with LMTP; Mon, 21 Jun 2004
	11:01:42 +0200
X-Sieve: CMU Sieve 2.2
Received: from localhost (localhost.localdomain [127.0.0.1]) by
	kerberos.felipe-alfaro.com (Postfix) with ESMTP id E1F3642E32 for
	<yo@felipe-alfaro.com>; Mon, 21 Jun 2004 11:01:39 +0200 (CEST)
Delivered-To: felipe_alfaro:linuxmail.org@linuxmail.org
Received: from pop24.pr.outblaze.com [205.158.62.125] by localhost with
	POP3 (fetchmail-6.1.0) for yo@felipe-alfaro.com (single-drop); Mon, 21 Jun
	2004 11:01:39 +0200 (CEST)
Received: (qmail 5531 invoked by uid 0); 21 Jun 2004 08:51:24 -0000
X-OB-Received: from unknown (205.158.62.147) by mta45-1.us4.outblaze.com;
	21 Jun 2004 08:51:24 -0000
Received: from vger.kernel.org (vger.kernel.org [12.107.209.244]) by
	spf5-2.us4.outblaze.com (Postfix) with ESMTP id 11D0419A94A for
	<felipe_alfaro@linuxmail.org>; Mon, 21 Jun 2004 08:51:24 +0000 (GMT)
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id
	S266164AbUFUItj (ORCPT <rfc822;felipe_alfaro@linuxmail.org>); Mon, 21 Jun
	2004 04:49:39 -0400
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266165AbUFUItj
	(ORCPT <rfc822;linux-kernel-outgoing>); Mon, 21 Jun 2004 04:49:39 -0400
Received: from fw.osdl.org ([65.172.181.6]:32748 "EHLO mail.osdl.org") by
	vger.kernel.org with ESMTP id S266164AbUFUIth (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>); Mon, 21 Jun 2004 04:49:37 -0400
Received: from bix (build.pdx.osdl.net [172.20.1.2]) by mail.osdl.org
	(8.11.6/8.11.6) with SMTP id i5L8nVr24333; Mon, 21 Jun 2004 01:49:31 -0700
Date:	Mon, 21 Jun 2004 01:48:37 -0700
From: Andrew Morton <akpm@osdl.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: torvalds@osdl.org, linux-kernel@vger.kernel.org
Subject: Re: 2.6.7-bk way too fast
Message-Id: <20040621014837.6b52fa2e.akpm@osdl.org>
In-Reply-To: <40D64DF7.5040601@pobox.com>
References: <40D64DF7.5040601@pobox.com>
X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-redhat-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
X-Mailing-List:	linux-kernel@vger.kernel.org
X-Evolution-Source: imap://falfaro;auth=GSSAPI@192.168.0.1/
Content-Transfer-Encoding: 8bit

Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Something is definitely screwy with the latest -bk.

Would you believe that there is a totally separate bug in the latest -mm
which has exactly the same symptoms?

mark_offset_tsc() does

	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
		jiffies_64++;

which is doing abs(unsigned long).

Which works OK if abs() in a function, but I made it a macro.

This fixes it up.


diff -puN include/linux/kernel.h~abs-fix-fix include/linux/kernel.h
--- 25/include/linux/kernel.h~abs-fix-fix	2004-06-21 01:42:24.283873616 -0700
+++ 25-akpm/include/linux/kernel.h	2004-06-21 01:43:08.150204920 -0700
@@ -55,7 +55,12 @@ void __might_sleep(char *file, int line)
 #endif
 
 #define abs(x) ({				\
-		typeof(x) __x = (x);		\
+		int __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+#define labs(x) ({				\
+		long __x = (x);			\
 		(__x < 0) ? -__x : __x;		\
 	})
 
_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[-- Attachment #3: mpparse --]
[-- Type: text/plain, Size: 4325 bytes --]

>From linux-kernel-owner@vger.kernel.org Mon Jun 21 10:00:43 2004
Return-Path:
	<linux-kernel-owner+felipe_alfaro=40linuxmail.org-s266143abufuhs6@vger.kernel.org>
Received: from kerberos.felipe-alfaro.com ([unix socket]) by
	kerberos.felipe-alfaro.com (Cyrus v2.2.3) with LMTP; Mon, 21 Jun 2004
	10:00:43 +0200
X-Sieve: CMU Sieve 2.2
Received: from localhost (localhost.localdomain [127.0.0.1]) by
	kerberos.felipe-alfaro.com (Postfix) with ESMTP id 9F99242E42 for
	<yo@felipe-alfaro.com>; Mon, 21 Jun 2004 10:00:43 +0200 (CEST)
Delivered-To: felipe_alfaro:linuxmail.org@linuxmail.org
Received: from pop24.pr.outblaze.com [205.158.62.125] by localhost with
	POP3 (fetchmail-6.1.0) for yo@felipe-alfaro.com (single-drop); Mon, 21 Jun
	2004 10:00:43 +0200 (CEST)
Received: (qmail 12717 invoked by uid 0); 21 Jun 2004 07:22:01 -0000
X-OB-Received: from unknown (205.158.62.52) by mta45-1.us4.outblaze.com; 21
	Jun 2004 07:22:01 -0000
Received: from vger.kernel.org (vger.kernel.org [12.107.209.244]) by
	spf5-3.us4.outblaze.com (Postfix) with ESMTP id 2F4FE3CF2A for
	<felipe_alfaro@linuxmail.org>; Mon, 21 Jun 2004 07:17:50 +0000 (GMT)
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id
	S266143AbUFUHS6 (ORCPT <rfc822;felipe_alfaro@linuxmail.org>); Mon, 21 Jun
	2004 03:18:58 -0400
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266138AbUFUHS6
	(ORCPT <rfc822;linux-kernel-outgoing>); Mon, 21 Jun 2004 03:18:58 -0400
Received: from fw.osdl.org ([65.172.181.6]:5803 "EHLO mail.osdl.org") by
	vger.kernel.org with ESMTP id S266144AbUFUHRV (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>); Mon, 21 Jun 2004 03:17:21 -0400
Received: from bix (build.pdx.osdl.net [172.20.1.2]) by mail.osdl.org
	(8.11.6/8.11.6) with SMTP id i5L7H5r10678; Mon, 21 Jun 2004 00:17:05 -0700
Date:	Mon, 21 Jun 2004 00:16:12 -0700
From: Andrew Morton <akpm@osdl.org>
To: lkml@lpbproduction.scom
Cc: lkml@lpbproductions.com, cs@tequila.co.jp, torvalds@osdl.org, norberto+linux-kernel@bensa.ath.cx, linux-kernel@vger.kernel.org, jgarzik@pobox.com
Subject: Re: 2.6.7-bk way too fast
Message-Id: <20040621001612.176bf8e1.akpm@osdl.org>
In-Reply-To: <200406210018.04883.lkml@lpbproductions.com>
References: <40D64DF7.5040601@pobox.com>
	 <Pine.LNX.4.58.0406202313510.11274@ppc970.osdl.org>
	 <40D688D1.7020308@tequila.co.jp>
	 <200406210018.04883.lkml@lpbproductions.com>
X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-redhat-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
X-Mailing-List:	linux-kernel@vger.kernel.org
X-Evolution-Source: imap://falfaro;auth=GSSAPI@192.168.0.1/
Content-Transfer-Encoding: 8bit

"Matt H." <lkml@lpbproductions.com> wrote:
>
> I can confirm simular behavior here. I loaded 2.6.7-mm1 tonite  and  tried  
> Andrew's  patch ( which didn't work ) and then Linus's  ( which also didn't 
> work ).
> 

hm.  This worked for me.  Could you double-check?


diff -puN arch/i386/kernel/mpparse.c~double-clock-speed-fix arch/i386/kernel/mpparse.c
--- 25/arch/i386/kernel/mpparse.c~double-clock-speed-fix	2004-06-20 23:28:16.655299120 -0700
+++ 25-akpm/arch/i386/kernel/mpparse.c	2004-06-20 23:28:20.468719392 -0700
@@ -1017,7 +1017,6 @@ void __init mp_config_acpi_legacy_irqs (
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;
diff -puN arch/x86_64/kernel/mpparse.c~double-clock-speed-fix arch/x86_64/kernel/mpparse.c
--- 25/arch/x86_64/kernel/mpparse.c~double-clock-speed-fix	2004-06-20 23:28:16.672296536 -0700
+++ 25-akpm/arch/x86_64/kernel/mpparse.c	2004-06-20 23:28:20.469719240 -0700
@@ -861,7 +861,6 @@ void __init mp_config_acpi_legacy_irqs (
 
 		for (idx = 0; idx < mp_irq_entries; idx++)
 			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
-				(mp_irqs[idx].mpc_dstapic == ioapic) &&
 				(mp_irqs[idx].mpc_srcbusirq == i ||
 				mp_irqs[idx].mpc_dstirq == i))
 					break;
_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.7-bk way too fast

[Norberto Bensa]

Felipe Alfaro Solana wrote:
> On Mon, 2004-06-21 at 01:48 -0700, Andrew Morton wrote:
> > Jeff Garzik <jgarzik@pobox.com> wrote:
> > > Something is definitely screwy with the latest -bk.
> >
> > Would you believe that there is a totally separate bug in the latest -mm
> > which has exactly the same symptoms?
>
> Applying Andrew's two following patches solved my problems with time
> skewing.

I can confirm this. Thanks Andrew!!

Regards,
Norberto

Re: 2.6.7-bk way too fast

[Sau Dan Lee]

>>>>> "Vojtech" == Vojtech Pavlik <vojtech@suse.cz> writes:

    Vojtech> It's possible that X does it's own autorepeat, though
    Vojtech> that'd rather surprise me.

Why?  XFree86 has been doing its own autorepeat, I think.

        $ xset q
        Keyboard Control:
          auto repeat:  on    key click percent:  0    LED mask:  00000000
          auto repeat delay:  660    repeat rate:  25
          auto repeating keys:  00ffffffdffffbbf
                                fa9fffffffdfe5ff
                                ffffffffffffffff
                                ffffffffffffffff
          bell percent:  50    bell pitch:  400    bell duration:  100

And I  can change it via "xset  r rate [delay [rate  ]]", according to
"xset help".  Indeed,  you can use 'xset' to  change the rate/delay to
very  extreme values,  which  exceed the  hardware  allowed on  AT/PS2
keyboards (e.g. rates > 30  cps), adjusted with the 'kbdrate' command.
So, the only  possibility for these hardware limits  to be transcended
is s/w based autorepeat.



-- 
Sau Dan LEE                     李守敦(Big5)                    ~{@nJX6X~}(HZ) 

E-mail: danlee@informatik.uni-freiburg.de
Home page: http://www.informatik.uni-freiburg.de/~danlee

Re: 2.6.7-bk way too fast

[Vojtech Pavlik]

On Mon, Jun 21, 2004 at 03:20:59PM +0200, Sau Dan Lee wrote:

>     Vojtech> It's possible that X does it's own autorepeat, though
>     Vojtech> that'd rather surprise me.
> 
> Why?  XFree86 has been doing its own autorepeat, I think.
> 
>         $ xset q
>         Keyboard Control:
>           auto repeat:  on    key click percent:  0    LED mask:  00000000
>           auto repeat delay:  660    repeat rate:  25
>           auto repeating keys:  00ffffffdffffbbf
>                                 fa9fffffffdfe5ff
>                                 ffffffffffffffff
>                                 ffffffffffffffff
>           bell percent:  50    bell pitch:  400    bell duration:  100
> 
> And I  can change it via "xset  r rate [delay [rate  ]]", according to
> "xset help".  Indeed,  you can use 'xset' to  change the rate/delay to
> very  extreme values,  which  exceed the  hardware  allowed on  AT/PS2
> keyboards (e.g. rates > 30  cps), adjusted with the 'kbdrate' command.
> So, the only  possibility for these hardware limits  to be transcended
> is s/w based autorepeat.
 
Indeed, X does its own autorepeat.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR

Re: 2.6.7-bk way too fast

[Sau Dan Lee]

>>>>> "Vojtech" == Vojtech Pavlik <vojtech@suse.cz> writes:

    Vojtech> Indeed, X does its own autorepeat.

Not X, but  XFree86.  There are X servers other  than XFree86 that can
be  used on  Linux.  Those  other implementations  could stick  to h/w
autorepeat, or a hybrid approach.


-- 
Sau Dan LEE                     李守敦(Big5)                    ~{@nJX6X~}(HZ) 

E-mail: danlee@informatik.uni-freiburg.de
Home page: http://www.informatik.uni-freiburg.de/~danlee