* 2.6.7-mm2
@ 2004-06-24 8:46 Andrew Morton
2004-06-24 9:39 ` 2.6.7-mm2 Russell King
` (8 more replies)
0 siblings, 9 replies; 23+ messages in thread
From: Andrew Morton @ 2004-06-24 8:46 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm2/
- Added a patch from Ingo which reworks the placement of mmaps within the
ia32 virtual memory layout. Has been in RH kernels for a long time.
If it breaks something, the app was already buggy. You can use
setarch -L my-buggy-app <args>
to run in back-compat mode. This requires a setarch patch - see the
changelog in flexible-mmap-267-mm1-a0.patch for details.
- knfsd update, arch updates, various fixes, cleanups and new bugs.
Changes since 2.6.7-mm1:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-arm.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-ieee1394.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pcmcia.patch
bk-scsi.patch
bk-usb.patch
Latest versions of external trees
-opti92x-ad1848-locking-fix.patch
-bk-input-build-fix.patch
-ppc64-build-fix.patch
-ppc64-eeh-warning-fix.patch
-pcm_native-stack-reduction.patch
-export-dmi-check-functions.patch
-hp-pavilion-use-dmi-api.patch
-pcmcia-enable-read-prefetch-on-o2micro-bridges-to-fix-hdsp.patch
-permit-inode-dentry-hash-tables-to-be-allocated-max_order-size.patch
-permit-inode-dentry-hash-tables-to-be-allocated-max_order-size-update.patch
-improved-psx-support-in-input-joystick-gameconc.patch
-o_noatime-support.patch
-ppp_syncttyc-receive-write_wakeup-fix.patch
-ide-stack-reduction-cleanup.patch
-airo-broke.patch
-jfs-build-fix.patch
-hid-tmff-fix-again.patch
-swapoff-activate-pages.patch
-add-ovcamchip-driver.patch
-uninline-machine_specific_memory_setup.patch
-add-wait_event_interruptible_exclusive-macro.patch
-iommu-max-segment-size.patch
-v4l-v4l2-api-updates.patch
-v4l-update-video-buf-for-per-frame-input-switching.patch
-v4l-video-buf-magic-numbers.patch
-v4l-video-buf-fixes.patch
-v4l-msp3400-cleanup.patch
-v4l-ir-common-update.patch
-v4l-tuner-tda9887-updates.patch
-v4l-bttv-driver-update.patch
-v4l-ir-input-driver-update.patch
-saa7134-update.patch
-v4l-cx88-driver-update.patch
-v4l-radio-zoltrix-fix.patch
-fix-isdn-to-not-assume-memio-return-values.patch
-sys_ioctl-export.patch
-mprotect-propagate-anon_vma.patch
-sparsify-quotactl.patch
-fix-possible-stack-corruption-during-reiserfs_file_write.patch
-numa-api-updates.patch
-isp16-check_region-removal.patch
-deadline-docco.patch
-move-as-docco.patch
-credits-update.patch
-nls-support-for-ascii.patch
-mips-remove-old-junk.patch
-ds1286-cleanups.patch
-cobalt-lcd-driver-update.patch
-add-m48t35-rtc-driver.patch
-farsync-warning-fix.patch
-sparc64-bug-needs-compiler-h.patch
-jfs-warning-fix.patch
-velocity-warning-fixes.patch
-velocity-warning-fixes-2.patch
-velocity-warning-fixes-3.patch
-velocity-warning-fixes-4.patch
-lindent-rwsem.patch
-tdfxb-warning-fix.patch
-idrh-path.patch
-wanxl-firmware-build-fix.patch
-avoid-rebuild-of-ikcfg-when-using-o=.patch
-kbuild-add-deb-pkg-target.patch
-x86_64-double-clock-speed-fix.patch
Merged
+kbuild-improve-kernel-build-with-separated-output.patch
kbuild improvements for building in a separate object directory
+kgdb-gapatch-fix-for-i386-single-step-into-sysenter.patch
Fix kgdb sysenter handling
-config_spinline.patch
Temporarily dropped so that
allow-i386-to-reenable-interrupts-on-lock-contention.patch gets properly
tested.
-schedstats.patch
Dropped due to some reject I was getting and was too lazy to fix.
-SL0-core-RC6-bk5.patch
-SL1-ext2-RC6-bk5.patch
-SL2-trivial-RC6-bk5.patch
-SL3-page-RC6-bk5.patch
-SL4-smb-RC6-bk5.patch
-SL5-xfs-RC6-bk5.patch
-SL6-shm-RC6-bk5.patch
-SL7-befs-RC6-bk5.patch
-SL8-jffs2-RC6-bk5.patch
These are out of date.
-reduce-tlb-flushing-during-process-migration.patch
-reduce-tlb-flushing-during-process-migration-oops-fix.patch
Dropped, obsolete.
+rcu-no-arg-fastcall-fix.patch
+sch_generic-rcu-fix.patch
Fix up rcu-no-arg.patch
+nx-update-2.patch
Update to the ia32 no-execute-bit patch
-input-serio-dynamic-allocation-fix.patch
I forget what happened to this.
+abs-fix-fix.patch
Fix abs-fix
+r8169_napi-help-text.patch
Kconfig help fix
+for-netmos-based-pci-cards-providing-serial-and-parallel-ports.patch
Driver fix
+kbuild-distclean-srctree-fix.patch
kbuild fix
+help-text-for-fb_riva_i2c.patch
Kconfig help fix
+nr_pagecache-can-go-negative.patch
handle nr_pagecache going transiently negative
+nr_swap_pages-is-long.patch
+nr_swap_pages-is-long-fixes.patch
+total_swap_pages-is-long.patch
Make nr_swap_pages and total_swap_pages longs.
+a2-rewrite-and-26-fixes.patch
MIPS sound driver rewrite.
+dell-laptop-lockup-fix-for-alsa.patch
Fix a dell laptop problem
+mips-update.patch
+mips-indydog-update.patch
Mips updates
+re-267-mm1-linker-trouble-with-config_fb_riva_i2c=y-and-modular-i2c.patch
fb driver build fix
+fix-early-cpu-vendor-detection-for-non-intel-cpus.patch
Fix early CPU detect
+oprofile-allow-normal-user-to-trigger-sample-dumps.patch
oprofile permission fix
+make-__free_pages_bulk-more-comprehensible.patch
Code cleanup
+tiny-update-to-documentation-submittingdrivers-list-xorg.patch
Documentation update
+net-at1700c-depends-on-mca_legacy.patch
+net-ne2c-needs-mca_legacy.patch
net driver build fixes
+core-fbcon-fixes.patch
fbcon fixes
+video-mode-change-notify-fbset.patch
fb driver fixes
+fix-power3-numa-init.patch
ppc64 fix
+cap_dac_override.patch
CAP_DAC_OVERRIDE consistency
+add-ppc85xx-maintainers-entry.patch
MAINTAINERS update
+flexible-mmap-267-mm1-a0.patch
+flexible-mmap-267-mm1-a0-fix.patch
rework ia32 mmap layout to increase the available virtual address space.
+oprofile-documentation-basic_profilingtxt-updates.patch
documentation update
+selinux-extend-and-revise-calls-to-secondary-module.patch
selinux fix
+fix-allocate_pgdat-comments.patch
Fix comments
+drivers-media-video-tda9840c-honour-return-code-of.patch
driver fix
+altix-serial-driver.patch
+altix-serial-driver-fix.patch
Altic serial driver update
+zap_pte_range-speedup.patch
Remove some unneeded code
+h8300-delete-obsolute-header.patch
h8/300 cleanup
+cirrusfb-it-lives.patch
Big cirrusfb update
+update-ikconfig-help-text.patch
+update-ikconfig-generator-script.patch
+consolidate-in-kernel-configuration.patch
ikconfig fixes
+hugetlb-use-safe-iterator.patch
+more-bug-fix-in-mm-hugetlbc-fix-try_to_free_low.patch
hugetlb fixes
+bridge-fix-bpdu-message_age.patch
bridge driver fix
+swsusp-minor-docs-updates.patch
+prepare-for-smp-suspend.patch
+swsusp-shuffle-cpuc-to-make-it-usable-for-smp-suspend.patch
swsusp updates
+267-mm1-port-acer-laptop-irq-routing-workaround-to-new-dmi-probing.patch
+267-mm1-port-pnp-bios-driver-to-new-dmi-probing.patch
+267-mm1-port-sonypi-driver-to-new-dmi-probing.patch
+267-mm1-port-piix4-smbus-driver-to-new-dmi-probing.patch
+267-mm1-port-powernow-k7-driver-to-new-dmi-probing.patch
+267-mm1-remove-unused-asus-k7v-rm-dmi-quirk.patch
+267-mm1-port-apm-bios-driver-to-new-dmi-probing.patch
Use the new dmi APIs
+hpet-fixes.patch
+hpet-fixes-fix.patch
HPET driver fixes
+reduce-tlb-flushing-during-process-migration-2.patch
ia64 context switch speedup
+sparse-trivial-fixes-of-assignment-expression-in-conditional-in-fs.patch
sparsification
+per-node-huge-page-stats-in-sysfs.patch
per-numa-node hugetlb stats in sysfs
+shut-up-kaweth-usb-net-driver.patch
+scsi-printk-fixes.patch
Squich noisy driver printks
+oom-killer-fix.patch
Fix an oom-killer problem
+sh-sh-3-on-chip-adc-support.patch
+sh-dma-mapping-updates.patch
+sh-dma-driver-updates.patch
+sh-early-printk-cleanup.patch
+sh-fixmap-support.patch
+sh-renesas-hs7751rvoip-board-support.patch
+sh-ide-cleanup.patch
+sh-ptep_get_and_clear-compile-fix.patch
+sh-sh-sci-updates.patch
+sh-solutionengine-7300-board-support.patch
+sh-renesas-rts7751r2d-board-support.patch
+sh-pci-updates.patch
+sh-sh7705-sh7300-subtype-support-st40-updates.patch
+sh-voyagergx-companion-chip-support.patch
+sh-merge.patch
+sh-consolidate-systemh-with-other-renesas-boards.patch
Super-H update
+md-fix-up-handling-for-read-error-in-raid1.patch
RAID1 fix
+knfsd-mark-nfs-tcp-server-not-experimental.patch
+knfsd-simplify-nfsd4-name-encoding.patch
+knfsd-simplify-nfsd4_release_lockowner.patch
+knfsd-delete-an-obsolete-comment-from-nfsd-rpc-code.patch
+knfsd-reduce-stack-usage-in-nfsd4.patch
+knfsd-nfsd4-lockowner-fixes.patch
+knfsd-parse-nsfd4-callback-information.patch
+knfsd-improve-cleaning-up-of-nfsd4-requests.patch
+knfsd-allow-user-to-set-nfsv4-lease-time.patch
kNFSd updates
+md-xor-template-selection-redo.patch
MD fix
+kswapd-warning-fix.patch
+balanced_irq-warning-fix.patch
+tr-warning-fixes.patch
+fc-warning-fix.patch
+pkt_sched-warning-fixes.patch
Fix some warnings
+ip_fw_compat_masq-build-fix.patch
netfilter compile fix
+267-fix-broken-alpha-build-ptracec-error.patch
alpha compile fix
All 195 patches:
linus.patch
kbuild-improve-kernel-build-with-separated-output.patch
kbuild: Improve Kernel build with separated output
allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention
sysfs-leaves-mount.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-dir.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-file.patch
sysfs backing store: sysfs_create() changes
sysfs-leaves-bin.patch
sysfs backing store: bin attribute changes
sysfs-leaves-symlink.patch
sysfs backing store: sysfs_create_link changes
sysfs-leaves-misc.patch
sysfs backing store: attribute groups and misc routines
ext3-jbd-needs-to-wait-for-locked-buffers.patch
jbd needs to wait for locked buffers
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-arm.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-ieee1394.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pcmcia.patch
bk-scsi.patch
bk-usb.patch
mm.patch
add -mmN to EXTRAVERSION
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-gapatch-fix-for-i386-single-step-into-sysenter.patch
kgdb-ga.patch fix for i386 single-step into sysenter
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag
radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
mustfix-lists.patch
mustfix lists
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
larger-io-bitmap.patch
larger IO bitmaps
really-ptrace-single-step-2.patch
ptrace single-stepping fix
ftruncate-vs-block_write_full_page.patch
ftruncate vs block_write_full_page race fix
ia32-fault-deadlock-fix-2.patch
ia32: fix deadlocks when oopsing while mmap_sem is held
ppc64-fault-deadlock-fix-2.patch
ppc64: fix deadlocks when oopsing while mmap_sem is held
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt
disk-barrier ide warning fix
barrier-update.patch
barrier update
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
ext3-barrier-support.patch
ext3 barrier support
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
From: Jens Axboe <axboe@suse.de>
Subject: Re: ide errors in 7-rc1-mm1 and later
add-bh_eopnotsupp-for-testing.patch
add BH_Eopnotsupp for testing async barrier failures
handle-async-barrier-failures.patch
Handle async barrier failures
x86-stack-dump-fixes.patch
x86 stack dump fixes
Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c
arch/i386/boot/compressed/misc.c warning fixes
rcu-lock-update-add-per-cpu-batch-counter.patch
rcu lock update: Add per-cpu batch counter
rcu-lock-update-use-a-sequence-lock-for-starting-batches.patch
rcu lock update: Use a sequence lock for starting batches
rcu-lock-update-code-move-cleanup.patch
rcu lock update: Code move & cleanup
singly-linked-rcu.patch
reduce rcu_head size - core
rcu-no-arg.patch
rcu: avoid passing an argument to the callback function
rcu-no-arg-fix.patch
reduce rcu_head size fix
rcu-no-arg-fastcall-fix.patch
rcu-no-arg fastcall fix
sch_generic-rcu-fix.patch
sch_generic-rcu-fix
enable-suspend-resuming-of-e1000.patch
Enable suspend/resuming of e1000
tty_io-hangup-locking.patch
tty_io.c hangup locking
nx-2.6.7-rc2-bk2-AF.patch
NX (No eXecute) support for x86
nx-update.patch
nx update
nx-update-2.patch
nx update 2
cpumask-1-10-cpu_present_map-real-even-on-non-smp.patch
cpumask 1/10 cpu_present_map real even on non-smp
cpumask-2-10-bitmap-cleanup-preparation-for-cpumask.patch
cpumask 2/10 bitmap cleanup preparation for cpumask overhaul
cpumask-3-10-bitmap-inlining-and-optimizations.patch
cpumask 3/10 bitmap inlining and optimizations
cpumask-5-10-rewrite-cpumaskh-single-bitmap-based.patch
cpumask 5/10 rewrite cpumask.h - single bitmap based implementation
cpumask-5-10-rewrite-cpumaskh-single-bitmap-based-cpu_mask_none-fix.patch
CPU_MASK_NONE fix
s390-fix-cpu_online-redefined-warnings.patch
s390: fix "cpu_online" redefined warnings
cpumask-6-10-remove-26-no-longer-used-cpumaskh-files.patch
cpumask 6/10 remove 26 no longer used cpumask*.h files
cpumask-7-10-remove-obsolete-cpumask-macro-uses-i386-arch.patch
cpumask 7/10 remove obsolete cpumask macro uses - i386 arch
cpumask-8-10-remove-obsolete-cpumask-macro-uses-other.patch
cpumask 8/10 remove obsolete cpumask macro uses - other archs
x86_64-cpu_online-fix.patch
x86_64-cpu_online-fix
ppc64-cpu_online-fix.patch
ppc64: cpu_online fix
cpumask-9-10-remove-no-longer-used-obsolete-macro-emulation.patch
cpumask 9/10 Remove no longer used obsolete macro emulation
cpumask-10-10-optimize-various-uses-of-new-cpumasks.patch
cpumask 10/10 optimize various uses of new cpumasks
cpumask-11-10-comment-spacing-tweaks.patch
cpumask: comment, spacing tweaks
cleanup-cpumask_t-temporaries.patch
clean up cpumask_t temporaries
alpha-cpumask-fix.patch
alpha: cpumask fixups
irqaction-use-cpumask.patch
make irqaction use a cpu mask
Fix irqaction-use-cpumask.patch for voyager
fix-and-reenable-msi-support-on-x86_64.patch
Fix and Reenable MSI Support on x86_64
Fix and Reenable MSI Support on x86_64 fix
perfctr-core.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
CONFIG_PERFCTR=n build fix
perfctr-i386.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr-x86_64.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-cpus_complement-fix.patch
perfctr-cpus_complement-fix
perfctr-cpumask-cleanup.patch
perfctr cpumask cleanup
perfctr-misc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
ext3-online-resize-patch.patch
ext3: online resizing
ext3-online-resize-warning-fix.patch
ext3-online-resize-warning-fix
vmscan-shuffle-things-around.patch
vmscan.c: shuffle things around
vmscan-scan-sanity.patch
vmscan.c scan rate fixes
vmscan-dont-reclaim-too-many-pages.patch
vmscan.c: dont reclaim too many pages
vfs-shrinkage-tuning.patch
vm: vfs shrinkage tuning
ide-stack-reduction.patch
IDE stack reduction
dnotify-remove-dn_lock.patch
dnotify.c: use inode->i_lock in place of dn_lock
dont-writeback-fd-bdev-inodes.patch
dont-writeback-fd-bdev-inodes
fancy-wakeups-in-wait-h.patch
Use fancy wakeups in wait.h
input-psmouse-resync-for-kvm-users.patch
input: psmouse resync for KVM users
input-psmouse-state-locking.patch
input: psmouse state locking
input-serio-connect-disconnect-mandatory.patch
input: serio connect/disconnect mandatory
input-serio-renames-1.patch
input: serio renames 1
input-serio-renames-1-fix.patch
input-serio-renames-1-fix
input-serio-renames-2.patch
input: serio renames 2
input-serio-dynamic-allocation.patch
input: serio dynamic allocation
input-serio-dynamic-allocation-fix-2.patch
input-serio-dynamic-allocation-fix-2
input-serio-dynamic-allocation-fix-3.patch
input-serio-dynamic-allocation-fix-3
input-serio-no-recursion.patch
input: serio no recursion
input-serio-sysfs-integration.patch
input: serio sysfs integration
input-serio-allow-rebinding.patch
input: serio allow rebinding
input-serio-manual-bind.patch
input: serio manual bind
input-serio_raw-driver.patch
input: serio_raw driver
buddy-reordering.patch
tweak the buddy allocator for better I/O merging
hwcache-align-kmalloc-caches.patch
hwcache align kmalloc caches
reduce-function-inlining-in-slabc.patch
reduce function inlining in slab.c
abs-fix.patch
abs() fixes
abs-fix-fix.patch
abs-fix-fix
ide-taskfilec-fixups-cleanups.patch
ide: remove redundant hwgroup->handler checks from ide-taskfile.c
ide-end-request-fix-for-config_ide_taskfile_io=y-pio-handlers.patch
ide: end request fix for CONFIG_IDE_TASKFILE_IO=y PIO handlers
ide-pio-in-drive-busy-fix-config_ide_taskfile_io=y.patch
ide: PIO-in drive busy fix (CONFIG_IDE_TASKFILE_IO=y)
ide-check-drive-mult_count-in-flagged_taskfile.patch
ide: check drive->mult_count in flagged_taskfile()
ide-last-irq-fix-for-task_mulout_intr-config_ide_taskfile_io=n.patch
ide: last IRQ fix for task_mulout_intr() (CONFIG_IDE_TASKFILE_IO=n)
ide-remove-dtf-debugging-printks-from-ide-taskfilec.patch
ide: remove DTF() debugging printks from ide-taskfile.c
ide-add-task_multi_sectors-to-ide-taskfilec.patch
ide: add task_multi_sectors() to ide-taskfile.c
ide-split-task_sectors-and-task_multi_sectors.patch
ide: split task_sectors() and task_multi_sectors()
ide-dont-clear-rq-errors-for-req_drive_taskfile-requests.patch
ide: don't clear rq->errors for REQ_DRIVE_TASKFILE requests
ide-use-task_buffer_sectors-in-ide-taskfilec.patch
ide: use task_buffer[_multi]_sectors() in ide-taskfile.c
ide-pio-out-setup-fixes-config_ide_taskfile_io=n.patch
ide: PIO-out setup fixes (CONFIG_IDE_TASKFILE_IO=n)
sysfs-overflow-debug.patch
sysfs-overflow-debug
fix-smbfs-readdir-oops.patch
Fix smbfs readdir oops
remove-smbfs-server-rcls-err.patch
Remove smbfs server->rcls/err
kallsyms-exclude.patch
kallsyms: exclude kallsyms-generated symbols
kallsyms-verify.patch
kallsyms: verify that System.map is stable
r8169_napi-help-text.patch
R8169_NAPI help text
for-netmos-based-pci-cards-providing-serial-and-parallel-ports.patch
Support NetMOS based PCI cards providing serial and parallel ports
kbuild-distclean-srctree-fix.patch
kbuild: distclean srctree fix
help-text-for-fb_riva_i2c.patch
help text for FB_RIVA_I2C
nr_pagecache-can-go-negative.patch
nr_pagecache can go negative
nr_swap_pages-is-long.patch
Make nr_swap_pages a long
nr_swap_pages-is-long-fixes.patch
nr_swap_pages-is-long-fixes
total_swap_pages-is-long.patch
make total_swap_pages a long
a2-rewrite-and-26-fixes.patch
mips: SGI A2 audio rewrite and 2.6 fixes
dell-laptop-lockup-fix-for-alsa.patch
Dell laptop lockup fix for ALSA
mips-update.patch
MIPS Update
mips-indydog-update.patch
Indydog update
re-267-mm1-linker-trouble-with-config_fb_riva_i2c=y-and-modular-i2c.patch
fix linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C
fix-early-cpu-vendor-detection-for-non-intel-cpus.patch
Fix early CPU vendor detection for non intel cpus
oprofile-allow-normal-user-to-trigger-sample-dumps.patch
OProfile: allow normal user to trigger sample dumps
make-__free_pages_bulk-more-comprehensible.patch
make __free_pages_bulk more comprehensible
tiny-update-to-documentation-submittingdrivers-list-xorg.patch
SubmittingDrivers fix
net-at1700c-depends-on-mca_legacy.patch
net/at1700.c depends on MCA_LEGACY
net-ne2c-needs-mca_legacy.patch
net/ne2.c needs MCA_LEGACY
core-fbcon-fixes.patch
Core fbcon fixes
video-mode-change-notify-fbset.patch
fbdev: video mode change notify (fbset)
fix-power3-numa-init.patch
ppc64: fix POWER3 NUMA init
cap_dac_override.patch
CAP_DAC_OVERRIDE fix
add-ppc85xx-maintainers-entry.patch
Add PPC85xx MAINTAINERS entry
flexible-mmap-267-mm1-a0.patch
i386 virtual memory layout rework
flexible-mmap-267-mm1-a0-fix.patch
flexible-mmap-267-mm1-a0 x86_64 fix
oprofile-documentation-basic_profilingtxt-updates.patch
(o)profile Documentation/basic_profiling.txt updates
selinux-extend-and-revise-calls-to-secondary-module.patch
SELinux: Extend and revise calls to secondary module
fix-allocate_pgdat-comments.patch
fix allocate_pgdat comments
drivers-media-video-tda9840c-honour-return-code-of.patch
drivers/media/video/tda9840.c: honour return code of i2c_add_driver()
altix-serial-driver.patch
Altix serial driver updates
altix-serial-driver-fix.patch
altix-serial-driver-fix
zap_pte_range-speedup.patch
zap_pte_range speedup
h8300-delete-obsolute-header.patch
h8300: delete obsolute header
cirrusfb-it-lives.patch
cirrusfb: major update
update-ikconfig-help-text.patch
update ikconfig help text
update-ikconfig-generator-script.patch
update ikconfig generator script
hugetlb-use-safe-iterator.patch
hugetlb.c: use safe iterator
bridge-fix-bpdu-message_age.patch
Bridge - Fix BPDU message_age
swsusp-minor-docs-updates.patch
swsusp minor docs updates
prepare-for-smp-suspend.patch
Prepare for SMP suspend
swsusp-shuffle-cpuc-to-make-it-usable-for-smp-suspend.patch
swsusp: shuffle cpu.c to make it usable for smp suspend
267-mm1-port-acer-laptop-irq-routing-workaround-to-new-dmi-probing.patch
dmi_scan: port Acer laptop irq routing workaround to new DMI probing
267-mm1-port-pnp-bios-driver-to-new-dmi-probing.patch
dmi_scan: port PnP BIOS driver to new DMI probing
267-mm1-port-sonypi-driver-to-new-dmi-probing.patch
dmi_scan: port sonypi driver to new DMI probing
267-mm1-port-piix4-smbus-driver-to-new-dmi-probing.patch
dmi_scan: port PIIX4 SMBUS driver to new DMI probing
267-mm1-port-powernow-k7-driver-to-new-dmi-probing.patch
dmi_scan: port powernow-k7 driver to new DMI probing
267-mm1-remove-unused-asus-k7v-rm-dmi-quirk.patch
dmi_scan: remove unused ASUS K7V-RM DMI quirk
267-mm1-port-apm-bios-driver-to-new-dmi-probing.patch
dmi_scan: port APM BIOS driver to new DMI probing
hpet-fixes.patch
hpet fixes
hpet-fixes-fix.patch
hpet-fixes fix
consolidate-in-kernel-configuration.patch
consolidate in-kernel configuration
reduce-tlb-flushing-during-process-migration-2.patch
Reduce TLB flushing during process migration
sparse-trivial-fixes-of-assignment-expression-in-conditional-in-fs.patch
sparse: fixes for "assignment expression in conditional" in fs/*
more-bug-fix-in-mm-hugetlbc-fix-try_to_free_low.patch
hugetlb.c - fix try_to_free_low()
per-node-huge-page-stats-in-sysfs.patch
per node huge page stats in sysfs
shut-up-kaweth-usb-net-driver.patch
shut-up kaweth usb/net driver
scsi-printk-fixes.patch
scsi printk fixes
oom-killer-fix.patch
oom killer: ignore free swapspace
sh-sh-3-on-chip-adc-support.patch
sh: SH-3 On-Chip ADC support
sh-dma-mapping-updates.patch
sh: dma-mapping updates.
sh-dma-driver-updates.patch
sh: DMA driver updates.
sh-early-printk-cleanup.patch
sh: early printk() cleanup.
sh-fixmap-support.patch
sh: fixmap support.
sh-renesas-hs7751rvoip-board-support.patch
sh: Renesas HS7751RVoIP board support.
sh-ide-cleanup.patch
sh: IDE cleanup.
sh-ptep_get_and_clear-compile-fix.patch
sh: ptep_get_and_clear() compile fix.
sh-sh-sci-updates.patch
sh: sh-sci updates.
sh-solutionengine-7300-board-support.patch
sh: SolutionEngine 7300 board support.
sh-renesas-rts7751r2d-board-support.patch
sh: Renesas RTS7751R2D board support.
sh-pci-updates.patch
sh: PCI updates
sh-sh7705-sh7300-subtype-support-st40-updates.patch
sh: SH7705/SH7300 subtype support, ST40 updates.
sh-voyagergx-companion-chip-support.patch
sh: VoyagerGX companion chip support.
sh-merge.patch
sh: merge.
sh-consolidate-systemh-with-other-renesas-boards.patch
sh: Consolidate SystemH with other Renesas boards.
md-fix-up-handling-for-read-error-in-raid1.patch
md: Fix up handling for read error in raid1.
knfsd-mark-nfs-tcp-server-not-experimental.patch
knfsd: mark NFS/TCP server not EXPERIMENTAL
knfsd-simplify-nfsd4-name-encoding.patch
knfsd: simplify nfsd4 name encoding.
knfsd-simplify-nfsd4_release_lockowner.patch
knfsd: simplify nfsd4_release_lockowner
knfsd-delete-an-obsolete-comment-from-nfsd-rpc-code.patch
knfsd: delete an obsolete comment from nfsd rpc code
knfsd-reduce-stack-usage-in-nfsd4.patch
knfsd: reduce stack usage in nfsd4
knfsd-nfsd4-lockowner-fixes.patch
knfsd: nfsd4 lockowner fixes
knfsd-parse-nsfd4-callback-information.patch
knfsd: parse nsfd4 callback information
knfsd-improve-cleaning-up-of-nfsd4-requests.patch
knfsd: improve cleaning up of nfsd4 requests
knfsd-allow-user-to-set-nfsv4-lease-time.patch
knfsd: allow user to set NFSv4 lease time.
md-xor-template-selection-redo.patch
md: XOR template selection redo
kswapd-warning-fix.patch
kswapd warning fix
balanced_irq-warning-fix.patch
balanced_irq warning fix
tr-warning-fixes.patch
tr.c warning fix
fc-warning-fix.patch
fc.c warning fix
ip_fw_compat_masq-build-fix.patch
ip_fw_compat_masq.c build fix
pkt_sched-warning-fixes.patch
pkt_sched.h warning fixes
267-fix-broken-alpha-build-ptracec-error.patch
fix broken alpha build ptrace.c error
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
@ 2004-06-24 9:39 ` Russell King
2004-06-24 13:28 ` 2.6.7-mm2 Felipe Alfaro Solana
2004-06-24 10:33 ` 2.6.7-mm2 Andrew Morton
` (7 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Russell King @ 2004-06-24 9:39 UTC (permalink / raw)
To: linux-kernel
On Thu, Jun 24, 2004 at 01:46:55AM -0700, Andrew Morton wrote:
> Changes since 2.6.7-mm1:
>
>
> bk-pcmcia.patch
Just a quick note to ask people to test 2.6.7-mm2 PCMCIA please.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial core
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
2004-06-24 9:39 ` 2.6.7-mm2 Russell King
@ 2004-06-24 10:33 ` Andrew Morton
2004-06-24 11:43 ` 2.6.7-mm2 Angelo Dell'Aera
2004-06-24 17:28 ` 2.6.7-mm2 Norberto Bensa
2004-06-24 13:20 ` 2.6.7-mm2 Jari Ruusu
` (6 subsequent siblings)
8 siblings, 2 replies; 23+ messages in thread
From: Andrew Morton @ 2004-06-24 10:33 UTC (permalink / raw)
To: linux-acpi; +Cc: linux-kernel
Andrew Morton <akpm@osdl.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm2/
>
> ...
> bk-acpi.patch
OK, ACPI seems to have progressed in a non-forward direction here.
If anyone has weird problems, please do a `patch -p1 -R' of
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm2/broken-out/bk-acpi.patch
USB doesn't come up:
usb 2-1: control timeout on ep0out
uhci_hcd 0000:00:1d.0: Unlink after no-IRQ? Different ACPI or APIC settings may help.
usb 2-1: control timeout on ep0out
usb 2-1: device not accepting address 2, error -110
usb 2-1: new low speed USB device using address 3
usb 2-1: control timeout on ep0out
usb 2-1: control timeout on ep0out
usb 2-1: device not accepting address 3, error -110
usb 2-2: new full speed USB device using address 4
usb 2-2: control timeout on ep0out
usb 2-2: control timeout on ep0out
usb 2-2: device not accepting address 4, error -110
usb 2-2: new full speed USB device using address 5
usb 2-2: control timeout on ep0out
usb 2-2: control timeout on ep0out
usb 2-2: device not accepting address 5, error -110
dmesg without bk-acpi.patch:
http://www.zip.com.au/~akpm/linux/patches/stuff/dmesg-good
dmesg with bk-acpi.patch:
http://www.zip.com.au/~akpm/linux/patches/stuff/dmesg-bad
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 10:33 ` 2.6.7-mm2 Andrew Morton
@ 2004-06-24 11:43 ` Angelo Dell'Aera
2004-06-24 17:28 ` 2.6.7-mm2 Norberto Bensa
1 sibling, 0 replies; 23+ messages in thread
From: Angelo Dell'Aera @ 2004-06-24 11:43 UTC (permalink / raw)
To: Linux-Kernel; +Cc: Andrew Morton
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thu, 24 Jun 2004 03:33:21 -0700
Andrew Morton <akpm@osdl.org> wrote:
>OK, ACPI seems to have progressed in a non-forward direction here.
>
>If anyone has weird problems, please do a `patch -p1 -R' of
>
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm2/broken-out/bk-acpi.patch
>
>USB doesn't come up:
>
>usb 2-1: control timeout on ep0out
>uhci_hcd 0000:00:1d.0: Unlink after no-IRQ? Different ACPI or APIC settings may help.
>usb 2-1: control timeout on ep0out
>usb 2-1: device not accepting address 2, error -110
>usb 2-1: new low speed USB device using address 3
>usb 2-1: control timeout on ep0out
>usb 2-1: control timeout on ep0out
>usb 2-1: device not accepting address 3, error -110
>usb 2-2: new full speed USB device using address 4
>usb 2-2: control timeout on ep0out
>usb 2-2: control timeout on ep0out
>usb 2-2: device not accepting address 4, error -110
>usb 2-2: new full speed USB device using address 5
>usb 2-2: control timeout on ep0out
>usb 2-2: control timeout on ep0out
>usb 2-2: device not accepting address 5, error -110
Here no problems at all. ACPI works quite good and I did few tests
for USB which show no particular problem.
buffer@mintaka:~$ cat /proc/cpuinfo | grep "model name"
model name : mobile AMD Athlon(tm) XP 2000+
At boot time...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller
ohci_hcd 0000:00:02.0: irq 10, pci mem dfc1c000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
While playing with a 4 port HUB and a digital camera...
ohci_hcd 0000:00:02.0: remote wakeup
usb 1-2: new full speed USB device using address 2
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Fujifilm Model: FinePix 1400Zoom Rev: 1000
Jun 24 13:21:08 mintaka kernel:
Type: Direct-Access ANSI SCSI revision: 02
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
scsi.agent[1690]: disk at /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/host0/0:0:0:0
SCSI device sda: 16000 512-byte hdwr sectors (8 MB)
sda: assuming Write Enabled
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb 1-2: USB disconnect, address 2
ohci_hcd 0000:00:02.0: remote wakeup
usb 1-2: new full speed USB device using address 3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.2: new full speed USB device using address 4
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Fujifilm Model: FinePix 1400Zoom Rev: 1000
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 16000 512-byte hdwr sectors (8 MB)
sda: assuming Write Enabled
sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
scsi.agent[1908]: disk at /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2.2/1-2.2:1.0/host1/1:0:0:0
usb 1-2.2: USB disconnect, address 4
usb 1-2: USB disconnect, address 3
Regards.
- --
Angelo Dell'Aera 'buffer'
Antifork Research, Inc. http://buffer.antifork.org
PGP information in e-mail header
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFA2r5opONIzxnBXKIRAvHWAKCbyh6g2BhcStWNSSP01IjKbGskKQCeOYc+
n/njVG7fSWhY6BeuaCxBIOw=
=mX3F
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
2004-06-24 9:39 ` 2.6.7-mm2 Russell King
2004-06-24 10:33 ` 2.6.7-mm2 Andrew Morton
@ 2004-06-24 13:20 ` Jari Ruusu
2004-06-24 15:04 ` 2.6.7-mm2 Roman Zippel
2004-06-24 14:25 ` 2.6.7-mm2 Coywolf Qi Hunt
` (5 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Jari Ruusu @ 2004-06-24 13:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
> +kbuild-improve-kernel-build-with-separated-output.patch
>
> kbuild improvements for building in a separate object directory
This breaks existing recommended syntax for external modules, because the
mini Makefile in object directory always provides O= even in cases where
calling code specified its own object directory:
make -C /lib/modules/`uname -r`/build modules M=`pwd` O=/foo
or
export KBUILD_OUTPUT=/foo
make -C /lib/modules/`uname -r`/build modules M=`pwd`
Andrew,
please drop this patch. Dropping this causes less breakage than applying it.
--
Jari Ruusu 1024R/3A220F51 5B 4B F9 BB D3 3F 52 E9 DB 1D EB E3 24 0E A9 DD
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 9:39 ` 2.6.7-mm2 Russell King
@ 2004-06-24 13:28 ` Felipe Alfaro Solana
0 siblings, 0 replies; 23+ messages in thread
From: Felipe Alfaro Solana @ 2004-06-24 13:28 UTC (permalink / raw)
To: Russell King; +Cc: linux-kernel
On Thu, 2004-06-24 at 10:39 +0100, Russell King wrote:
> On Thu, Jun 24, 2004 at 01:46:55AM -0700, Andrew Morton wrote:
> > Changes since 2.6.7-mm1:
> >
> >
> > bk-pcmcia.patch
>
> Just a quick note to ask people to test 2.6.7-mm2 PCMCIA please.
Just compiling it... Will keep the list members informed if something
goes wrong.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (2 preceding siblings ...)
2004-06-24 13:20 ` 2.6.7-mm2 Jari Ruusu
@ 2004-06-24 14:25 ` Coywolf Qi Hunt
2004-06-25 5:51 ` [PATCH] (2.6.7-mm2) kbuild distclean srctree fix ii Coywolf Qi Hunt
2004-06-24 17:46 ` 2.6.7-mm2 (compile stats) John Cherry
` (4 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Coywolf Qi Hunt @ 2004-06-24 14:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
>Changes since 2.6.7-mm1:
>
>+kbuild-distclean-srctree-fix.patch
>
> kbuild fix
>
Hi, Andrew,
I'm afraid you didn't apply my patch properly. You changed a wrong line.
See the differences b/w
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm2/broken-out/kbuild-distclean-srctree-fix.patch
and
--- linux-2.6.7/Makefile Wed Jun 9 01:07:00 2004
+++ linux-2.6.7-cy/Makefile Wed Jun 16 21:33:57 2004
@@ -841,7 +841,7 @@ mrproper: clean archmrproper $(mrproper-
.PHONY: distclean
distclean: mrproper
- @find . $(RCS_FIND_IGNORE) \
+ @find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -size 0 \
--
Coywolf Qi Hunt
Admin of http://GreatCN.org and http://LoveCN.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 13:20 ` 2.6.7-mm2 Jari Ruusu
@ 2004-06-24 15:04 ` Roman Zippel
2004-06-24 18:00 ` 2.6.7-mm2 Valdis.Kletnieks
0 siblings, 1 reply; 23+ messages in thread
From: Roman Zippel @ 2004-06-24 15:04 UTC (permalink / raw)
To: Jari Ruusu; +Cc: Andrew Morton, linux-kernel
Hi,
On Thu, 24 Jun 2004, Jari Ruusu wrote:
> This breaks existing recommended syntax for external modules, because the
> mini Makefile in object directory always provides O= even in cases where
> calling code specified its own object directory:
>
> make -C /lib/modules/`uname -r`/build modules M=`pwd` O=/foo
Where is this recommended? How do you know that "/foo" is better directory
on a random system?
bye, Roman
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 10:33 ` 2.6.7-mm2 Andrew Morton
2004-06-24 11:43 ` 2.6.7-mm2 Angelo Dell'Aera
@ 2004-06-24 17:28 ` Norberto Bensa
1 sibling, 0 replies; 23+ messages in thread
From: Norberto Bensa @ 2004-06-24 17:28 UTC (permalink / raw)
To: linux-kernel
Andrew Morton wrote:
> OK, ACPI seems to have progressed in a non-forward direction here.
>
> If anyone has weird problems, please do a `patch -p1 -R' of
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-m
>m2/broken-out/bk-acpi.patch
Thanks Andrew. ov511 wasn't coming up. I did the above patch and everything
works :-)
Regards,
Norberto
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2 (compile stats)
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (3 preceding siblings ...)
2004-06-24 14:25 ` 2.6.7-mm2 Coywolf Qi Hunt
@ 2004-06-24 17:46 ` John Cherry
2004-06-24 19:16 ` [patch] 2.6.7-mm2: fdomain_cs needs unknown symbols Adrian Bunk
` (3 subsequent siblings)
8 siblings, 0 replies; 23+ messages in thread
From: John Cherry @ 2004-06-24 17:46 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel@vger.kernel.org
Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)
Warnings/Errors Summary
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.7-mm2 0w/0e 0w/0e 109w/0e 7w/0e 1w/0e 106w/0e
2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e
2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
John
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 15:04 ` 2.6.7-mm2 Roman Zippel
@ 2004-06-24 18:00 ` Valdis.Kletnieks
0 siblings, 0 replies; 23+ messages in thread
From: Valdis.Kletnieks @ 2004-06-24 18:00 UTC (permalink / raw)
To: Roman Zippel; +Cc: Jari Ruusu, Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 827 bytes --]
On Thu, 24 Jun 2004 17:04:30 +0200, Roman Zippel said:
> Hi,
>
> On Thu, 24 Jun 2004, Jari Ruusu wrote:
>
> > This breaks existing recommended syntax for external modules, because the
> > mini Makefile in object directory always provides O= even in cases where
> > calling code specified its own object directory:
> >
> > make -C /lib/modules/`uname -r`/build modules M=`pwd` O=/foo
>
> Where is this recommended? How do you know that "/foo" is better directory
> on a random system?
I think Jari's point is that it's providing O=/something *even* when the
calling code *DOES* know that /foo is a better directory, so when you pass it
O=/foo because you know it's The Right Thing for Your Particular Random System,
it gets overridden.
Either that, or I need to find more caffeine, and re-parse what Jari wrote... ;)
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* [patch] 2.6.7-mm2: fdomain_cs needs unknown symbols
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (4 preceding siblings ...)
2004-06-24 17:46 ` 2.6.7-mm2 (compile stats) John Cherry
@ 2004-06-24 19:16 ` Adrian Bunk
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
` (2 subsequent siblings)
8 siblings, 0 replies; 23+ messages in thread
From: Adrian Bunk @ 2004-06-24 19:16 UTC (permalink / raw)
To: Andrew Morton, James.Bottomley, David Hinds; +Cc: linux-kernel, linux-scsi
On Thu, Jun 24, 2004 at 01:46:55AM -0700, Andrew Morton wrote:
>...
> All 195 patches:
>...
> bk-scsi.patch
>...
This makes two functions in drivers/scsi/fdomain.c static that are
required in fdomain_cs.o:
<-- snip -->
WARNING: /lib/modules/2.6.7-mm2/kernel/drivers/scsi/pcmcia/fdomain_cs.ko
needs unknown symbol fdomain_16x0_bus_reset
WARNING: /lib/modules/2.6.7-mm2/kernel/drivers/scsi/pcmcia/fdomain_cs.ko
needs unknown symbol fdomain_setup
<-- snip -->
Although I agree that the way fdomain_cs.o is built is too ugly for
words, I'd suggest the following patch that revert these static's:
--- linux-2.6.7-mm2-modular/drivers/scsi/fdomain.c.old 2004-06-24 21:04:56.000000000 +0200
+++ linux-2.6.7-mm2-modular/drivers/scsi/fdomain.c 2004-06-24 21:07:17.000000000 +0200
@@ -418,7 +418,7 @@
static irqreturn_t do_fdomain_16x0_intr( int irq, void *dev_id,
struct pt_regs * regs );
-static int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt);
+int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt);
/* Allow insmod parameters to be like LILO parameters. For example:
insmod fdomain fdomain=0x140,11 */
@@ -555,7 +555,7 @@
printk( "\n" );
}
-static int __init fdomain_setup(char *str)
+int __init fdomain_setup(char *str)
{
int ints[4];
@@ -1541,7 +1541,7 @@
return SUCCESS;
}
-static int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt)
+int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt)
{
outb( 1, SCSI_Cntl_port );
do_pause( 2 );
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (5 preceding siblings ...)
2004-06-24 19:16 ` [patch] 2.6.7-mm2: fdomain_cs needs unknown symbols Adrian Bunk
@ 2004-06-24 20:57 ` R. J. Wysocki
2004-06-24 21:38 ` 2.6.7-mm2 R. J. Wysocki
` (2 more replies)
2004-06-24 20:59 ` 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95 Adrian Bunk
2004-06-29 5:59 ` 2.6.7-mm2: random problems with mmap Peter Lundkvist
8 siblings, 3 replies; 23+ messages in thread
From: R. J. Wysocki @ 2004-06-24 20:57 UTC (permalink / raw)
To: Andrew Morton; +Cc: ak, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1278 bytes --]
On Thursday 24 of June 2004 10:46, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-m
>m2/
Well, I have alarmingly many problems with this patch (my system is a dual
Opteron - full config log attached):
1) There is an Oops at early boot time, caused probably by earlyprintk, which
makes the serial console stop working (the call trace goes too fast to read
and of course it does not go to the serial console ...).
2) There is an Oops when trying to unload the sound driver (snd-intel8x0). At
present I'm unable to grab it. because of 1).
3) This breaks fb console on my system quite a bit:
> +core-fbcon-fixes.patch
- there is an ugly grey background area behind the penguin logos at startup.
The (screen behind the) logos are (is) ok without it. ;-)
There were no such problems on 2.6.7-mm1, and I've already reversed the
bk-acpi.patch. I'm currently trying to figure out which patches should be
reversed to cure 1) and 2) and grab the Oops traces.
The kernel config is attached and I'll send you more info when there's more
info.
Yours,
rjw
----------------------------
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
-- Richard P. Feynman
[-- Attachment #2: hardware.log --]
[-- Type: text/x-log, Size: 25446 bytes --]
chimera:~ # cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 240
stepping : 1
cpu MHz : 1386.744
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
bogomips : 2727.93
TLB size : 1088 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 240
stepping : 1
cpu MHz : 1386.744
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
bogomips : 2768.89
TLB size : 1088 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp
chimera:~ # cat /proc/modules
snd_seq 62848 1 - Live 0xffffffffa01a7000
ipt_TCPMSS 4736 1 - Live 0xffffffffa01a4000
ipt_TOS 3008 18 - Live 0xffffffffa01a2000
usbserial 30900 0 - Live 0xffffffffa0199000
ipt_MASQUERADE 5376 1 - Live 0xffffffffa0196000
ipt_LOG 7040 87 - Live 0xffffffffa0193000
ipt_state 2560 75 - Live 0xffffffffa0191000
parport_pc 40128 1 - Live 0xffffffffa0186000
lp 12392 0 - Live 0xffffffffa017f000
parport 46220 2 parport_pc,lp, Live 0xffffffffa0172000
ppp_generic 29728 0 - Live 0xffffffffa0169000
slhc 8256 1 ppp_generic, Live 0xffffffffa0165000
snd_pcm_oss 66024 0 - Live 0xffffffffa0153000
snd_mixer_oss 21504 1 snd_pcm_oss, Live 0xffffffffa014c000
snd_ioctl32 17984 0 - Live 0xffffffffa0146000
snd_intel8x0 39956 5 - Live 0xffffffffa013b000
snd_ac97_codec 78724 1 snd_intel8x0, Live 0xffffffffa0126000
snd_pcm 116896 4 snd_pcm_oss,snd_ioctl32,snd_intel8x0, Live 0xffffffffa0108000
snd_timer 28680 2 snd_seq,snd_pcm, Live 0xffffffffa00ff000
snd_page_alloc 14160 2 snd_intel8x0,snd_pcm, Live 0xffffffffa00fa000
gameport 5184 1 snd_intel8x0, Live 0xffffffffa00f7000
snd_mpu401_uart 9536 1 snd_intel8x0, Live 0xffffffffa00f3000
snd_rawmidi 29440 1 snd_mpu401_uart, Live 0xffffffffa00ea000
snd_seq_device 9804 2 snd_seq,snd_rawmidi, Live 0xffffffffa00e6000
snd 70184 21 snd_seq,snd_pcm_oss,snd_mixer_oss,snd_ioctl32,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xffffffffa00d3000
soundcore 11168 1 snd, Live 0xffffffffa00cf000
eth1394 22352 0 - Live 0xffffffffa00c8000
usblp 14080 0 - Live 0xffffffffa00c3000
ohci_hcd 21828 0 - Live 0xffffffffa00bc000
ehci_hcd 29636 0 - Live 0xffffffffa00b3000
usbcore 121656 6 usbserial,usblp,ohci_hcd,ehci_hcd, Live 0xffffffffa0094000
raw1394 28312 0 - Live 0xffffffffa008c000
ohci1394 34180 0 - Live 0xffffffffa0082000
ieee1394 116472 3 eth1394,raw1394,ohci1394, Live 0xffffffffa0064000
tg3 82692 0 - Live 0xffffffffa004e000
ipt_REJECT 7232 3 - Live 0xffffffffa004b000
iptable_mangle 3520 1 - Live 0xffffffffa0049000
iptable_filter 3456 1 - Live 0xffffffffa0047000
ip_nat_ftp 6672 0 - Live 0xffffffffa0044000
iptable_nat 32572 3 ipt_MASQUERADE,ip_nat_ftp, Live 0xffffffffa003b000
ip_tables 21952 9 ipt_TCPMSS,ipt_TOS,ipt_MASQUERADE,ipt_LOG,ipt_state,ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat, Live 0xffffffffa0034000
floppy 64984 0 - Live 0xffffffffa0023000
sg 41464 0 - Live 0xffffffffa0017000
sr_mod 19684 0 - Live 0xffffffffa0011000
cdrom 39016 1 sr_mod, Live 0xffffffffa0006000
ide_scsi 18628 0 - Live 0xffffffffa0000000
chimera:~ # cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
5008-500b : ACPI timer
5010-5015 : ACPI CPU throttle
8000-8fff : PCI Bus #02
8800-88ff : 0000:02:07.0
8800-88ff : sym53c8xx
8c00-8c0f : 0000:02:08.0
8c00-8c0f : 3ware Storage Controller
9000-9fff : PCI Bus #03
9400-940f : 0000:03:0b.0
9400-940f : sata_sil
9480-9483 : 0000:03:0b.0
9480-9483 : sata_sil
9800-9807 : 0000:03:0b.0
9800-9807 : sata_sil
9880-9883 : 0000:03:0b.0
9880-9883 : sata_sil
9c00-9c07 : 0000:03:0b.0
9c00-9c07 : sata_sil
b480-b49f : 0000:00:07.2
b800-b8ff : 0000:00:07.5
b800-b8ff : AMD AMD8111 - AC'97
bc00-bc3f : 0000:00:07.5
bc00-bc3f : AMD AMD8111 - Controller
ffa0-ffaf : 0000:00:07.1
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
chimera:~ # cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cf7ff : Video ROM
000cf800-000d07ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-0031397c : Kernel code
0031397d-00424560 : Kernel data
3fff0000-3fffefff : ACPI Tables
3ffff000-3fffffff : ACPI Non-volatile Storage
daf00000-daffffff : PCI Bus #01
db000000-db0fffff : PCI Bus #02
db100000-db1fffff : PCI Bus #03
db300000-eb3fffff : PCI Bus #05
e0000000-e7ffffff : 0000:05:00.0
e0000000-e05fffff : vesafb
f0000000-f7ffffff : 0000:04:00.0
f0000000-f7ffffff : aperture
fb500000-fb5fffff : PCI Bus #01
fb600000-fc6fffff : PCI Bus #02
fb800000-fbffffff : 0000:02:08.0
fc6dc000-fc6ddfff : 0000:02:07.0
fc6dc000-fc6ddfff : sym53c8xx
fc6df800-fc6dfbff : 0000:02:07.0
fc6df800-fc6dfbff : sym53c8xx
fc6dfc00-fc6dfc0f : 0000:02:08.0
fc6f0000-fc6fffff : 0000:02:09.0
fc6f0000-fc6fffff : tg3
fc700000-fc8fffff : PCI Bus #03
fc8f7000-fc8f7fff : 0000:03:00.0
fc8f7000-fc8f7fff : ohci_hcd
fc8f8000-fc8fbfff : 0000:03:0c.0
fc8fc000-fc8fcfff : 0000:03:00.1
fc8fc000-fc8fcfff : ohci_hcd
fc8fd000-fc8fdfff : 0000:03:0a.0
fc8fd000-fc8fdfff : ohci_hcd
fc8fe000-fc8fefff : 0000:03:0a.1
fc8fe000-fc8fefff : ohci_hcd
fc8ff000-fc8ff7ff : 0000:03:0c.0
fc8ff000-fc8ff7ff : ohci1394
fc8ff800-fc8ff8ff : 0000:03:0a.2
fc8ff800-fc8ff8ff : ehci_hcd
fc8ffc00-fc8fffff : 0000:03:0b.0
fc8ffc00-fc8fffff : sata_sil
fc9fe000-fc9fefff : 0000:00:0a.1
fc9ff000-fc9fffff : 0000:00:0b.1
fca00000-feafffff : PCI Bus #05
fd000000-fdffffff : 0000:05:00.0
ff7c0000-ffffffff : reserved
chimera:~ # lspci -vvv
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fc700000-fc8fffff
Prefetchable memory behind bridge: db100000-db1fffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [c0] #08 [0086]
Capabilities: [f0] #08 [8000]
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at b480 [size=32]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03)
Subsystem: Tyan Computer: Unknown device 2885
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at bc00 [size=64]
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fb600000-fc6fffff
Prefetchable memory behind bridge: 00000000db000000-00000000db000000
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
Capabilities: [c0] #08 [004a]
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at fc9fe000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fb500000-fb5fffff
Prefetchable memory behind bridge: 00000000daf00000-00000000daf00000
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at fc9ff000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
02:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter (rev 01)
Subsystem: Intel Corp.: Unknown device 7830
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4250ns min, 4500ns max), cache line size 10
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at fc6df800 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at fc6dc000 (64-bit, non-prefetchable) [size=8K]
Expansion ROM at fc6b0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2250ns min), cache line size 10
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 8c00 [size=16]
Region 1: Memory at fc6dfc00 (32-bit, non-prefetchable) [size=16]
Region 2: Memory at fb800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fc6c0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 02)
Subsystem: Tyan Computer: Unknown device 2885
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fc6f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc6e0000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 0000400844824000 Data: 0420
03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc8f7000 (32-bit, non-prefetchable) [size=4K]
03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc8fc000 (32-bit, non-prefetchable) [size=4K]
03:0a.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Unknown device 2027:0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc8fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0a.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Unknown device 2027:0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc8fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0a.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Unknown device 2027:0032
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc8ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0b.0 RAID bus controller: CMD Technology Inc: Unknown device 3114 (rev 02)
Subsystem: CMD Technology Inc: Unknown device 3114
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=16]
Region 5: Memory at fc8ffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at fc800000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Tyan Computer: Unknown device 2885
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc8ff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fc8f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
04:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 13)
Subsystem: Advanced Micro Devices [AMD] AMD-8151 System Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh+ GART64- HTrans+ 64bit+ FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] #08 [0060]
04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fca00000-feafffff
Prefetchable memory behind bridge: db300000-eb3fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
05:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc.: Unknown device 2960
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
chimera:~ # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 10 Lun: 00
Vendor: IBM Model: IC35L018UWD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: 3ware Model: Logical Disk 0 Rev: 1.2
Type: Direct-Access ANSI SCSI revision: ffffffff
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: JLMS Model: XJ-HD166S Rev: DS18
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi7 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: DVDRW LDW-851S Rev: GS08
Type: CD-ROM ANSI SCSI revision: 02
chimera:~ #
[-- Attachment #3: 2.6.7-mm2-config --]
[-- Type: text/plain, Size: 28363 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_K8_NUMA=y
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=2
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_USE_VECTOR=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=y
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=m
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_TEST=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp852"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_POSIX is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_KGDB is not set
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_MLS=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
^ permalink raw reply [flat|nested] 23+ messages in thread
* 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (6 preceding siblings ...)
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
@ 2004-06-24 20:59 ` Adrian Bunk
2004-06-24 21:24 ` Andrew Morton
2004-06-29 5:59 ` 2.6.7-mm2: random problems with mmap Peter Lundkvist
8 siblings, 1 reply; 23+ messages in thread
From: Adrian Bunk @ 2004-06-24 20:59 UTC (permalink / raw)
To: Andrew Morton, Nick Piggin; +Cc: linux-kernel
I'm getting the following compile error in 2.6.7-mm2 with SCHED_SMT=y
and NUMA=y when using gcc 2.95 (it doesn't seem to be specific to -mm):
<-- snip -->
...
CC arch/i386/kernel/smpboot.o
arch/i386/kernel/smpboot.c: In function `arch_init_sched_domains':
arch/i386/kernel/smpboot.c:1195: invalid lvalue in unary `&'
arch/i386/kernel/smpboot.c:1231: invalid lvalue in unary `&'
make[1]: *** [arch/i386/kernel/smpboot.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95
2004-06-24 20:59 ` 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95 Adrian Bunk
@ 2004-06-24 21:24 ` Andrew Morton
0 siblings, 0 replies; 23+ messages in thread
From: Andrew Morton @ 2004-06-24 21:24 UTC (permalink / raw)
To: Adrian Bunk; +Cc: piggin, linux-kernel
Adrian Bunk <bunk@fs.tum.de> wrote:
>
> CC arch/i386/kernel/smpboot.o
> arch/i386/kernel/smpboot.c: In function `arch_init_sched_domains':
> arch/i386/kernel/smpboot.c:1195: invalid lvalue in unary `&'
> arch/i386/kernel/smpboot.c:1231: invalid lvalue in unary `&'
--- 25/arch/i386/kernel/smpboot.c~smpboot-build-fix Thu Jun 24 14:22:55 2004
+++ 25-akpm/arch/i386/kernel/smpboot.c Thu Jun 24 14:22:55 2004
@@ -1192,7 +1192,9 @@ __init void arch_init_sched_domains(void
int j;
cpumask_t nodemask;
struct sched_group *node = &sched_group_nodes[i];
- cpus_and(nodemask, node_to_cpumask(i), cpu_possible_map);
+ cpumask_t node_cpumask = node_to_cpumask(i);
+
+ cpus_and(nodemask, node_cpumask, cpu_possible_map);
if (cpus_empty(nodemask))
continue;
@@ -1228,7 +1230,9 @@ __init void arch_init_sched_domains(void
for (i = 0; i < MAX_NUMNODES; i++) {
struct sched_group *cpu = &sched_group_nodes[i];
cpumask_t nodemask;
- cpus_and(nodemask, node_to_cpumask(i), cpu_possible_map);
+ cpumask_t node_cpumask = node_to_cpumask(i);
+
+ cpus_and(nodemask, node_cpumask, cpu_possible_map);
if (cpus_empty(nodemask))
continue;
_
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
@ 2004-06-24 21:38 ` R. J. Wysocki
2004-06-24 21:50 ` 2.6.7-mm2 R. J. Wysocki
2004-06-25 5:21 ` 2.6.7-mm2 Andrew Morton
2 siblings, 0 replies; 23+ messages in thread
From: R. J. Wysocki @ 2004-06-24 21:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: ak, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1143 bytes --]
On Thursday 24 of June 2004 22:57, R. J. Wysocki wrote:
> On Thursday 24 of June 2004 10:46, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7
> >-m m2/
>
> Well, I have alarmingly many problems with this patch (my system is a dual
> Opteron - full config log attached):
>
> 1) There is an Oops at early boot time, caused probably by earlyprintk,
> which makes the serial console stop working (the call trace goes too fast
> to read and of course it does not go to the serial console ...).
I have reversed:
+reduce-tlb-flushing-during-process-migration-2.patch
and it cured this Oops, though it has nothing in common with the console,
obviously.
The serial console just does not work for me at all (earlyprintk apparently
does). Attached is what I get from the earlyprintk. Ther rest of kernel
messages goes to the local console (tty0), although it is not even present in
the kernel command line (sigh).
Yours,
rjw
----------------------------
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
-- Richard P. Feynman
[-- Attachment #2: 2.6.7-mm2-earlyprintk.log --]
[-- Type: text/x-log, Size: 9412 bytes --]
Bootdata ok (command line is root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi)
Linux version 2.6.7-mm2 (rafael@chimera) (gcc version 3.3.3 (SuSE Linux)) #2 SMP Thu Jun 24 22:00:43 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
kernel direct mapping tables upto 10100000000 @ 8000-c000
Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 MemBase 0000000000000000 Limit 000000001fffffff
Node 1 MemBase 0000000020000000 Limit 000000003fff0000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000001fffffff
Bootmem setup node 1 0000000020000000-000000003fff0000
No mptable found.
On node 0 totalpages: 131071
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126975 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 131056
DMA zone: 0 pages, LIFO batch:1
Normal zone: 131056 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f66f0
ACPI: RSDT (v001 A M I OEMRSDT 0x10000302 MSFT 0x00000097) @ 0x000000003fff0000
ACPI: FADT (v001 A M I OEMFACP 0x10000302 MSFT 0x00000097) @ 0x000000003fff0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000302 MSFT 0x00000097) @ 0x000000003fff0380
ACPI: OEMB (v001 A M I OEMBIOS 0x10000302 MSFT 0x00000097) @ 0x000000003ffff040
ACPI: SRAT (v001 A M I OEMSRAT 0x10000302 MSFT 0x00000097) @ 0x000000003fff39f0
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000003fff3ae0
ACPI: DSDT (v001 0ABCF 0ABCF007 0x00000007 INTL 0x02002026) @ 0x0000000000000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
CPU 1: aperture @ f0000000 size 128 MB
Built 2 zonelists
Initializing CPU#0
Kernel command line: root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1387.535 MHz processor.
disabling early console
Bootdata ok (command line is root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi)
Linux version 2.6.7-mm2 (rafael@chimera) (gcc version 3.3.3 (SuSE Linux)) #3 SMP Thu Jun 24 23:17:21 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
kernel direct mapping tables upto 10100000000 @ 8000-c000
Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 MemBase 0000000000000000 Limit 000000001fffffff
Node 1 MemBase 0000000020000000 Limit 000000003fff0000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000001fffffff
Bootmem setup node 1 0000000020000000-000000003fff0000
No mptable found.
On node 0 totalpages: 131071
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126975 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 131056
DMA zone: 0 pages, LIFO batch:1
Normal zone: 131056 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f66f0
ACPI: RSDT (v001 A M I OEMRSDT 0x10000302 MSFT 0x00000097) @ 0x000000003fff0000
ACPI: FADT (v001 A M I OEMFACP 0x10000302 MSFT 0x00000097) @ 0x000000003fff0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000302 MSFT 0x00000097) @ 0x000000003fff0380
ACPI: OEMB (v001 A M I OEMBIOS 0x10000302 MSFT 0x00000097) @ 0x000000003ffff040
ACPI: SRAT (v001 A M I OEMSRAT 0x10000302 MSFT 0x00000097) @ 0x000000003fff39f0
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000003fff3ae0
ACPI: DSDT (v001 0ABCF 0ABCF007 0x00000007 INTL 0x02002026) @ 0x0000000000000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
CPU 1: aperture @ f0000000 size 128 MB
Built 2 zonelists
Initializing CPU#0
Kernel command line: root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1387.567 MHz processor.
disabling early console
Bootdata ok (command line is root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi)
Linux version 2.6.7-mm2 (rafael@chimera) (gcc version 3.3.3 (SuSE Linux)) #3 SMP Thu Jun 24 23:17:21 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
kernel direct mapping tables upto 10100000000 @ 8000-c000
Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 MemBase 0000000000000000 Limit 000000001fffffff
Node 1 MemBase 0000000020000000 Limit 000000003fff0000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000001fffffff
Bootmem setup node 1 0000000020000000-000000003fff0000
No mptable found.
On node 0 totalpages: 131071
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126975 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 131056
DMA zone: 0 pages, LIFO batch:1
Normal zone: 131056 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f66f0
ACPI: RSDT (v001 A M I OEMRSDT 0x10000302 MSFT 0x00000097) @ 0x000000003fff0000
ACPI: FADT (v001 A M I OEMFACP 0x10000302 MSFT 0x00000097) @ 0x000000003fff0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000302 MSFT 0x00000097) @ 0x000000003fff0380
ACPI: OEMB (v001 A M I OEMBIOS 0x10000302 MSFT 0x00000097) @ 0x000000003ffff040
ACPI: SRAT (v001 A M I OEMSRAT 0x10000302 MSFT 0x00000097) @ 0x000000003fff39f0
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000003fff3ae0
ACPI: DSDT (v001 0ABCF 0ABCF007 0x00000007 INTL 0x02002026) @ 0x0000000000000000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
CPU 1: aperture @ f0000000 size 128 MB
Built 2 zonelists
Initializing CPU#0
Kernel command line: root=/dev/sdc3 vga=792 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 hdc=ide-scsi
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1387.537 MHz processor.
disabling early console
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 21:38 ` 2.6.7-mm2 R. J. Wysocki
@ 2004-06-24 21:50 ` R. J. Wysocki
2004-06-25 5:21 ` 2.6.7-mm2 Andrew Morton
2 siblings, 0 replies; 23+ messages in thread
From: R. J. Wysocki @ 2004-06-24 21:50 UTC (permalink / raw)
To: Andrew Morton; +Cc: ak, linux-kernel
On Thursday 24 of June 2004 22:57, R. J. Wysocki wrote:
> On Thursday 24 of June 2004 10:46, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7
> >-m m2/
>
> Well, I have alarmingly many problems with this patch (my system is a dual
> Opteron - full config log attached):
>
[snip]
> 2) There is an Oops when trying to unload the sound driver (snd-intel8x0).
> At present I'm unable to grab it. because of 1).
This Oops was also cured by reverting the:
+reduce-tlb-flushing-during-process-migration-2.patch
Yours,
rjw
--
Rafael J. Wysocki,
SiSK
[tel. (+48) 605 053 693]
----------------------------
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
-- Richard P. Feynman
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 21:38 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 21:50 ` 2.6.7-mm2 R. J. Wysocki
@ 2004-06-25 5:21 ` Andrew Morton
2004-06-25 10:48 ` 2.6.7-mm2 R. J. Wysocki
2 siblings, 1 reply; 23+ messages in thread
From: Andrew Morton @ 2004-06-25 5:21 UTC (permalink / raw)
To: R. J. Wysocki; +Cc: ak, linux-kernel
"R. J. Wysocki" <rjwysocki@sisk.pl> wrote:
>
> On Thursday 24 of June 2004 10:46, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-m
> >m2/
>
> Well, I have alarmingly many problems with this patch (my system is a dual
> Opteron - full config log attached):
>
> 1) There is an Oops at early boot time, caused probably by earlyprintk, which
> makes the serial console stop working (the call trace goes too fast to read
> and of course it does not go to the serial console ...).
This is fixed, yes?
> 2) There is an Oops when trying to unload the sound driver (snd-intel8x0). At
> present I'm unable to grab it. because of 1).
I'm not able to reproduce this. Can you grab a trace now?
> 3) This breaks fb console on my system quite a bit:
>
> > +core-fbcon-fixes.patch
>
> - there is an ugly grey background area behind the penguin logos at startup.
> The (screen behind the) logos are (is) ok without it. ;-)
I forwarded this to Antonino, but he's hiding.
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] (2.6.7-mm2) kbuild distclean srctree fix ii
2004-06-24 14:25 ` 2.6.7-mm2 Coywolf Qi Hunt
@ 2004-06-25 5:51 ` Coywolf Qi Hunt
0 siblings, 0 replies; 23+ messages in thread
From: Coywolf Qi Hunt @ 2004-06-25 5:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hello Andrew,
You've changed a wrong line. There's several ``@find .
$(RCS_FIND_IGNORE)'' in Makefile.
You want the line about 24 lines below. Please apply this patch to
re-fix it.
http://greatcn.org/~coywolf/patches/2.6/kbuild-distclean-srctree-fix-ii.patch
coywolf
===============================================================
--- linux-2.6.7-mm2/Makefile 2004-06-24 22:16:08.000000000 -0500
+++ linux-2.6.7-mm2-cy/Makefile 2004-06-25 00:13:55.885753597 -0500
@@ -866,7 +866,7 @@ $(clean-dirs):
clean: archclean $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
- @find $(srctree) $(RCS_FIND_IGNORE) \
+ @find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
@@ -890,7 +890,7 @@ mrproper: clean archmrproper $(mrproper-
.PHONY: distclean
distclean: mrproper
- @find . $(RCS_FIND_IGNORE) \
+ @find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -size 0 \
--
Coywolf Qi Hunt
Admin of http://GreatCN.org and http://LoveCN.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2
2004-06-25 5:21 ` 2.6.7-mm2 Andrew Morton
@ 2004-06-25 10:48 ` R. J. Wysocki
0 siblings, 0 replies; 23+ messages in thread
From: R. J. Wysocki @ 2004-06-25 10:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: ak, linux-kernel
On Friday 25 of June 2004 07:21, Andrew Morton wrote:
> "R. J. Wysocki" <rjwysocki@sisk.pl> wrote:
> > On Thursday 24 of June 2004 10:46, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6
> > >.7-m m2/
> >
> > Well, I have alarmingly many problems with this patch (my system is a
> > dual Opteron - full config log attached):
> >
> > 1) There is an Oops at early boot time, caused probably by earlyprintk,
> > which makes the serial console stop working (the call trace goes too fast
> > to read and of course it does not go to the serial console ...).
>
> This is fixed, yes?
I think so. I haven't tried your patch yet (I managed to miss it ;-)), but
reversing the "+reduce-tlb-flushing-during-process-migration-2.patch"
helps here, so I assume the answer is "yes".
> > 2) There is an Oops when trying to unload the sound driver
> > (snd-intel8x0). At present I'm unable to grab it. because of 1).
>
> I'm not able to reproduce this. Can you grab a trace now?
This is related to the previous one, certainly. I'm unable to reproduce it
after reversing the "+reduce-tlb-flushing-during-process-migration-2.patch",
too.
The trace would probably look very much like that one:
Jun 24 22:16:40 chimera kernel: Unable to handle kernel NULL pointer
dereference at 0000000000000238 RIP:
Jun 24 22:16:40 chimera kernel: <ffffffff80119be4>{flush_tlb_mm+4}
Jun 24 22:16:40 chimera kernel: PML4 3f6a3067 PGD 3f6d7067 PMD 0
Jun 24 22:16:40 chimera kernel: Oops: 0000 [2] SMP
Jun 24 22:16:40 chimera kernel: CPU 0
Jun 24 22:16:40 chimera kernel: Modules linked in: parport_pc lp parport
usbserial snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss
snd_ioctl32 snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc
gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ohci1394
ieee1394 ehci_hcd tg3 ohci_hcd usblp usbcore dm_mod
Jun 24 22:16:40 chimera kernel: Pid: 8489, comm: kstopmachine Not tainted
2.6.7-mm2
Jun 24 22:16:40 chimera kernel: RIP: 0010:[flush_tlb_mm+4/176]
<ffffffff80119be4>{flush_tlb_mm+4}
Jun 24 22:16:40 chimera kernel: RIP: 0010:[<ffffffff80119be4>]
<ffffffff80119be4>{flush_tlb_mm+4}
Jun 24 22:16:40 chimera kernel: RSP: 0018:000001003efe5e88 EFLAGS: 00010216
Jun 24 22:16:40 chimera kernel: RAX: 0000000000000000 RBX: 000001003efe5e98
RCX: 000001003efe5ee8
Jun 24 22:16:40 chimera kernel: RDX: 000001003efe5e60 RSI: 000001003e4e2a70
RDI: 0000000000000000
Jun 24 22:16:40 chimera kernel: RBP: 000001003efe5f28 R08: 000001003efe4000
R09: 0000000000000001
Jun 24 22:16:40 chimera kernel: R10: 00000000ffffffff R11: 0000000000000000
R12: 000001002070f620
Jun 24 22:16:40 chimera kernel: R13: 000001003efe5ea8 R14: 0000000000000000
R15: 000001003e4e2a70
Jun 24 22:16:40 chimera kernel: FS: 0000002a95d330a0(0000)
GS:ffffffff80497280(0000) knlGS:0000000000000000
Jun 24 22:16:41 chimera kernel: CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
Jun 24 22:16:41 chimera kernel: CR2: 0000000000000238 CR3: 0000000000101000
CR4: 00000000000006e0
Jun 24 22:16:41 chimera kernel: Process kstopmachine (pid: 8489, threadinfo
000001003efe4000, task 000001003e4e2a70)
Jun 24 22:16:41 chimera kernel: Stack: 000001003efe5f28 ffffffff801319c4
0000000000000001 0000000000000246
Jun 24 22:16:41 chimera kernel: 000001003efe5ea8 000001003efe5ea8
0000010000000000 000001003e4e2a70
Jun 24 22:16:41 chimera kernel: 0000000000000000 0000000000000206
Jun 24 22:16:41 chimera kernel: Call
Trace:<ffffffff801319c4>{set_cpus_allowed+436}
<ffffffff80150e83>{stopmachine+35}
Jun 24 22:16:41 chimera kernel: <ffffffff8010f24f>{child_rip+8}
<ffffffff80150e60>{stopmachine+0}
Jun 24 22:16:41 chimera kernel: <ffffffff8010f247>{child_rip+0}
Jun 24 22:16:41 chimera kernel:
Jun 24 22:16:41 chimera kernel: Code: 48 8b 87 38 02 00 00 48 89 f9 48 89 04
24 65 8b 04 25 34 00
Jun 24 22:16:41 chimera kernel: RIP <ffffffff80119be4>{flush_tlb_mm+4} RSP
<000001003efe5e88>
Jun 24 22:16:41 chimera kernel: CR2: 0000000000000238
but I had only been able to get this:
Jun 24 23:20:20 chimera kernel: Unable to handle kernel NULL pointer
dereference at 0000000000000238 RIP:
Jun 24 23:20:20 chimera kernel: <ffffffff80119be4>{flush_tlb_mm+4}
Jun 24 23:20:20 chimera kernel: PML4 1e86a067 PGD 0
Jun 24 23:20:20 chimera kernel: Oops: 0000 [2] SMP
before the machine hanged solid after rmmod (the serial console doesn't work,
as I've already reported).
Yours,
rjw
----------------------------
For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled.
-- Richard P. Feynman
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2: random problems with mmap
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
` (7 preceding siblings ...)
2004-06-24 20:59 ` 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95 Adrian Bunk
@ 2004-06-29 5:59 ` Peter Lundkvist
2004-06-29 6:50 ` Andrew Morton
8 siblings, 1 reply; 23+ messages in thread
From: Peter Lundkvist @ 2004-06-29 5:59 UTC (permalink / raw)
To: linux-kernel
Hi,
I have problems running cyrus lmtpd; it fails randomly after
fetching 30-50 mails. I have only seen this problem in
2.6.7-mm2 (-mm1 was ok, have not tested -mm3 yet).
/peter
Strace at failure:
open("/var/spool/cyrus/mail/p/user/peter/Linux kernel/cyrus.header", O_RDWR) = 12
fstat64(12, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
mmap2(NULL, 175, PROT_READ, MAP_SHARED, 12, 0) = 0x10000
rt_sigaction(SIGALRM, {0x8080300, [], SA_ONESHOT}, NULL, 8) = 0
alarm(100) = 0
fcntl64(12, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}) = 0
fstat64(12, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
stat64("/var/spool/cyrus/mail/p/user/peter/Linux kernel/cyrus.header", {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
alarm(0) = 100
rt_sigaction(SIGALRM, {SIG_IGN}, NULL, 8) = 0
open("/var/spool/cyrus/mail/p/user/peter/Linux kernel/cyrus.index", O_RDWR) = 13
fstat64(13, {st_mode=S_IFREG|0600, st_size=2177784, ...}) = 0
mmap2(NULL, 2187264, PROT_READ, MAP_SHARED, 13, 0) = -1 ENOMEM (Cannot allocate memory)
map at time of failure:
00010000-00011000 r--s 00000000 03:0a 442939 /var/spool/cyrus/mail/p/user/peter/Linux kernel/cyrus.header
08048000-0810e000 r-xp 00000000 03:0a 1954693 /usr/lib/cyrus/bin/lmtpd
0810e000-0810f000 rw-p 000c6000 03:0a 1954693 /usr/lib/cyrus/bin/lmtpd
0810f000-0815c000 rw-p 0810f000 00:00 0
b6a4d000-b6a56000 r-xp 00000000 03:0a 1375569 /lib/tls/i686/cmov/libnss_files-2.3.2.so
b6a56000-b6a57000 rw-p 00008000 03:0a 1375569 /lib/tls/i686/cmov/libnss_files-2.3.2.so
b6a57000-b6a60000 r-xp 00000000 03:0a 1441139 /lib/tls/i686/cmov/libnss_nis-2.3.2.so
b6a60000-b6a61000 rw-p 00008000 03:0a 1441139 /lib/tls/i686/cmov/libnss_nis-2.3.2.so
b6a70000-b6a77000 r-xp 00000000 03:0a 1372610 /lib/tls/i686/cmov/libnss_compat-2.3.2.so
b6a77000-b6a78000 rw-p 00006000 03:0a 1372610 /lib/tls/i686/cmov/libnss_compat-2.3.2.so
b6af4000-b6af8000 r--s 00000000 03:0a 631004 /var/lib/cyrus/mailboxes.db
b6af8000-b6afe000 rw-s 00000000 03:0a 166401 /var/lib/cyrus/db/__db.005
b6afe000-b7a50000 rw-s 00000000 03:0a 57597 /var/lib/cyrus/db/__db.004
b7a50000-b7a68000 rw-s 00000000 03:0a 6192 /var/lib/cyrus/db/__db.003
b7a68000-b7aaa000 rw-s 00000000 03:0a 5293 /var/lib/cyrus/db/__db.002
b7aaa000-b7aac000 rw-s 00000000 03:0a 4811 /var/lib/cyrus/db/__db.001
b7aac000-b7aaf000 r-xp 00000000 03:0a 443116 /usr/lib/sasl2/libanonymous.so.2.0.18
b7aaf000-b7ab0000 rw-p 00002000 03:0a 443116 /usr/lib/sasl2/libanonymous.so.2.0.18
b7ad0000-b7ad4000 r-xp 00000000 03:0a 442951 /usr/lib/sasl2/libcrammd5.so.2.0.18
b7ad4000-b7ad5000 rw-p 00003000 03:0a 442951 /usr/lib/sasl2/libcrammd5.so.2.0.18
b7af5000-b7aff000 r-xp 00000000 03:0a 443097 /usr/lib/sasl2/libdigestmd5.so.2.0.18
b7aff000-b7b00000 rw-p 0000a000 03:0a 443097 /usr/lib/sasl2/libdigestmd5.so.2.0.18
b7b20000-b7b23000 r-xp 00000000 03:0a 528665 /usr/lib/sasl2/liblogin.so.2.0.18
b7b23000-b7b24000 rw-p 00003000 03:0a 528665 /usr/lib/sasl2/liblogin.so.2.0.18
b7b44000-b7b48000 r-xp 00000000 03:0a 1235682 /lib/tls/i686/cmov/libcrypt-2.3.2.so
b7b48000-b7b49000 rw-p 00004000 03:0a 1235682 /lib/tls/i686/cmov/libcrypt-2.3.2.so
b7b49000-b7b70000 rw-p b7b49000 00:00 0
b7b7f000-b7b82000 r-xp 00000000 03:0a 443105 /usr/lib/sasl2/libplain.so.2.0.18
b7b82000-b7b83000 rw-p 00003000 03:0a 443105 /usr/lib/sasl2/libplain.so.2.0.18
b7ba3000-b7baa000 r-xp 00000000 03:0a 622716 /usr/lib/sasl2/libntlm.so.2.0.18
b7baa000-b7bab000 rw-p 00007000 03:0a 622716 /usr/lib/sasl2/libntlm.so.2.0.18
b7bcb000-b7bd0000 r-xp 00000000 03:0a 178254 /usr/lib/sasl2/libsasldb.so.2.0.18
b7bd0000-b7bd1000 rw-p 00004000 03:0a 178254 /usr/lib/sasl2/libsasldb.so.2.0.18
b7bf1000-b7bf9000 r-xp 00000000 03:0a 443102 /usr/lib/sasl2/libotp.so.2.0.18
b7bf9000-b7bfc000 rw-p 00008000 03:0a 443102 /usr/lib/sasl2/libotp.so.2.0.18
b7c7d000-b7c7e000 rw-p b7c7d000 00:00 0
b7c7e000-b7c80000 r-xp 00000000 03:0a 1235688 /lib/tls/i686/cmov/libdl-2.3.2.so
b7c80000-b7c81000 rw-p 00001000 03:0a 1235688 /lib/tls/i686/cmov/libdl-2.3.2.so
b7c81000-b7db0000 r-xp 00000000 03:0a 1235678 /lib/tls/i686/cmov/libc-2.3.2.so
b7db0000-b7db8000 rw-p 0012f000 03:0a 1235678 /lib/tls/i686/cmov/libc-2.3.2.so
b7db8000-b7dbc000 rw-p b7db8000 00:00 0
b7dbc000-b7dce000 r-xp 00000000 03:0a 1235733 /lib/tls/i686/cmov/libnsl-2.3.2.so
b7dce000-b7dcf000 rw-p 00011000 03:0a 1235733 /lib/tls/i686/cmov/libnsl-2.3.2.so
b7dcf000-b7dd1000 rw-p b7dcf000 00:00 0
b7dd1000-b7dd8000 r-xp 00000000 03:0a 1467215 /lib/libwrap.so.0.7.6
b7dd8000-b7dd9000 rw-p 00006000 03:0a 1467215 /lib/libwrap.so.0.7.6
b7dd9000-b7dda000 rw-p b7dd9000 00:00 0
b7dda000-b7ec2000 r-xp 00000000 03:0a 1482802 /usr/lib/i686/cmov/libcrypto.so.0.9.7
b7ec2000-b7ed3000 rw-p 000e8000 03:0a 1482802 /usr/lib/i686/cmov/libcrypto.so.0.9.7
b7ed3000-b7ed7000 rw-p b7ed3000 00:00 0
b7ed7000-b7f05000 r-xp 00000000 03:0a 1484387 /usr/lib/i686/cmov/libssl.so.0.9.7
b7f05000-b7f08000 rw-p 0002d000 03:0a 1484387 /usr/lib/i686/cmov/libssl.so.0.9.7
b7f08000-b7fb1000 r-xp 00000000 03:0a 622722 /usr/lib/libdb3.so.3.0.2
b7fb1000-b7fb2000 rw-p 000a8000 03:0a 622722 /usr/lib/libdb3.so.3.0.2
b7fb2000-b7fc1000 r-xp 00000000 03:0a 1441157 /lib/tls/i686/cmov/libresolv-2.3.2.so
b7fc1000-b7fc2000 rw-p 0000f000 03:0a 1441157 /lib/tls/i686/cmov/libresolv-2.3.2.so
b7fc2000-b7fc5000 rw-p b7fc2000 00:00 0
b7fc5000-b7fd9000 r-xp 00000000 03:0a 172678 /usr/lib/libsasl2.so.2.0.18
b7fd9000-b7fda000 rw-p 00013000 03:0a 172678 /usr/lib/libsasl2.so.2.0.18
b7fe9000-b7fea000 rw-p b7fe9000 00:00 0
b7fea000-b8000000 r-xp 00000000 03:0a 1375576 /lib/ld-2.3.2.so
b8000000-b8001000 rw-p 00015000 03:0a 1375576 /lib/ld-2.3.2.so
bfff5000-c0000000 rwxp bfff5000 00:00 0
ffffe000-fffff000 ---p 00000000 00:00 0
ulimit -a:
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) unlimited
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4094
virtual memory (kbytes, -v) unlimited
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2: random problems with mmap
2004-06-29 5:59 ` 2.6.7-mm2: random problems with mmap Peter Lundkvist
@ 2004-06-29 6:50 ` Andrew Morton
2004-06-29 10:29 ` Jesper Juhl
0 siblings, 1 reply; 23+ messages in thread
From: Andrew Morton @ 2004-06-29 6:50 UTC (permalink / raw)
To: Peter Lundkvist; +Cc: linux-kernel
Peter Lundkvist <p.lundkvist@telia.com> wrote:
>
> I have problems running cyrus lmtpd; it fails randomly after
> fetching 30-50 mails. I have only seen this problem in
> 2.6.7-mm2 (-mm1 was ok, have not tested -mm3 yet).
The "flexible-mmap" patch was rather broken. It was dropped for -mm3 and a
fixed version will be in -mm4.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm2: random problems with mmap
2004-06-29 6:50 ` Andrew Morton
@ 2004-06-29 10:29 ` Jesper Juhl
0 siblings, 0 replies; 23+ messages in thread
From: Jesper Juhl @ 2004-06-29 10:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: Peter Lundkvist, linux-kernel
On Mon, 28 Jun 2004, Andrew Morton wrote:
> Peter Lundkvist <p.lundkvist@telia.com> wrote:
> >
> > I have problems running cyrus lmtpd; it fails randomly after
> > fetching 30-50 mails. I have only seen this problem in
> > 2.6.7-mm2 (-mm1 was ok, have not tested -mm3 yet).
>
> The "flexible-mmap" patch was rather broken. It was dropped for -mm3 and a
> fixed version will be in -mm4.
Ahh, that could perhaps explain why I was getting strange errors from
ldconfig about being unable to mmap certain libraries when I was using
-mm2 (-mm3 works). I'll be sure to watch out for that behaviour with -mm4
--
Jesper Juhl <juhl-lkml@dif.dk>
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2004-06-29 10:30 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-24 8:46 2.6.7-mm2 Andrew Morton
2004-06-24 9:39 ` 2.6.7-mm2 Russell King
2004-06-24 13:28 ` 2.6.7-mm2 Felipe Alfaro Solana
2004-06-24 10:33 ` 2.6.7-mm2 Andrew Morton
2004-06-24 11:43 ` 2.6.7-mm2 Angelo Dell'Aera
2004-06-24 17:28 ` 2.6.7-mm2 Norberto Bensa
2004-06-24 13:20 ` 2.6.7-mm2 Jari Ruusu
2004-06-24 15:04 ` 2.6.7-mm2 Roman Zippel
2004-06-24 18:00 ` 2.6.7-mm2 Valdis.Kletnieks
2004-06-24 14:25 ` 2.6.7-mm2 Coywolf Qi Hunt
2004-06-25 5:51 ` [PATCH] (2.6.7-mm2) kbuild distclean srctree fix ii Coywolf Qi Hunt
2004-06-24 17:46 ` 2.6.7-mm2 (compile stats) John Cherry
2004-06-24 19:16 ` [patch] 2.6.7-mm2: fdomain_cs needs unknown symbols Adrian Bunk
2004-06-24 20:57 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 21:38 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 21:50 ` 2.6.7-mm2 R. J. Wysocki
2004-06-25 5:21 ` 2.6.7-mm2 Andrew Morton
2004-06-25 10:48 ` 2.6.7-mm2 R. J. Wysocki
2004-06-24 20:59 ` 2.6.7-mm2: compile error SCHED_SMT + NUMA + gcc 2.95 Adrian Bunk
2004-06-24 21:24 ` Andrew Morton
2004-06-29 5:59 ` 2.6.7-mm2: random problems with mmap Peter Lundkvist
2004-06-29 6:50 ` Andrew Morton
2004-06-29 10:29 ` Jesper Juhl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox