From: Jeff Garzik <jgarzik@pobox.com>
To: "Bill Rugolsky Jr." <brugolsky@telemetry-investments.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libata: 2.6.7-bk6,12 hang with ata_piix in combined mode; -bk5 ok
Date: Sun, 04 Jul 2004 14:03:23 -0400 [thread overview]
Message-ID: <40E8466B.9000702@pobox.com> (raw)
In-Reply-To: <20040630005420.GA4163@ti64.telemetry-investments.com>
Bill Rugolsky Jr. wrote:
> Jeff,
>
> I have a Dell Poweredge 750 with a pair of Maxtor 250GB SATA drives
> running Fedora Core 1 + upgrades to support 2.6.
>
> The Dell BIOS configures the controller in combined mode.
> Kernel 2.6.7-bk5 boots, while 2.6.7-bk6,bk12 generate the following
> timeout (copied by hand):
>
> ata_piix: combined mode detected
> ACPI: PCI interrupt 0000:1f.2[A]: no GSI
> ata: 0x1f0 IDE port busy
> ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFEA8 irq 15
> ata1: dev 0 ATA, max UDMA/133 488281250 sectors: lba48
> ata1: dev 1 ATA, max UDMA/133 488281250 sectors: lba48
> ata1: dev0 configured for UDMA/133
> ata1: dev1 configured for UDMA/133
> scsi0: ata_piix
> Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
> Type: Direct Access ANSI SCSI revision: 05
> SCSI device sda: 488281250 512-byte hdwr sectors (250000MB)
> SCSI device sda: drive cache: write back
> sda:<3>ata1: command 0x25 timeout, stat 0xd0 host_stat 0x64
If "acpi=off" does not fix this, please test the patch I posted recently
[PATCH,RFT] SATA interrupt handling
next prev parent reply other threads:[~2004-07-04 18:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-30 0:54 libata: 2.6.7-bk6,12 hang with ata_piix in combined mode; -bk5 ok Bill Rugolsky Jr.
2004-06-30 1:20 ` Jeff Garzik
2004-06-30 15:56 ` Bill Rugolsky Jr.
2004-06-30 18:02 ` Jeff Garzik
2004-07-04 18:03 ` Jeff Garzik [this message]
2004-07-05 1:34 ` Bill Rugolsky Jr.
[not found] <A6974D8E5F98D511BB910002A50A6647615FF44B@hdsmsx403.hd.intel.com>
2004-07-05 20:39 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40E8466B.9000702@pobox.com \
--to=jgarzik@pobox.com \
--cc=brugolsky@telemetry-investments.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox