From: Jeff Garzik <jgarzik@pobox.com>
To: Michael Thonke <TK-SHOCKWAVE@web.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Disabled SATA (ICH5R) support cause hard seeks to disks and APIC errors on i875P chipset
Date: Mon, 05 Jul 2004 19:41:47 -0400 [thread overview]
Message-ID: <40E9E73B.5080002@pobox.com> (raw)
In-Reply-To: <971519831@web.de>
Michael Thonke wrote:
> So a nother question accodring APIC and SATA on a Pentium 4 HT enabled and Intel 875P Chipset
>
> Maybe Jeff Garzik or Andrew can answer it..
>
> Since 2.6.4-mm* I get wired problemes when I disable the SATA Drive for the Intel ICH5R Controller on a Abit-IC7 Mainboard. I want to use the normal Intel IDE driver. But when I diasbled it in kernel + recompile and reboot the machine my harddrives make hard seeks and fancy noises also I get APIC error on CPU0 without any hints or oops and few minutes later after using the machine it freezes the harddisk (maybe power off,I noticed it on reset that the disks power on with SATA support it does not appear). If the SATA driver under SCSI is turned on no problems.
How are you disabling the SATA drive? BIOS? Kernel configuration?
Jeff
prev parent reply other threads:[~2004-07-05 23:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-05 22:20 Disabled SATA (ICH5R) support cause hard seeks to disks and APIC errors on i875P chipset Michael Thonke
2004-07-05 23:41 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40E9E73B.5080002@pobox.com \
--to=jgarzik@pobox.com \
--cc=TK-SHOCKWAVE@web.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox