From: Benoit Boissinot <bboissin@gmail.com>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@osdl.org>
Subject: New ALPS code in -mm
Date: Fri, 4 Mar 2005 22:02:03 +0100 [thread overview]
Message-ID: <40f323d005030413024d71e3f9@mail.gmail.com> (raw)
In-Reply-To: <20050301115432.GA5598@ucw.cz>
[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]
On Tue, 1 Mar 2005 12:54:32 +0100, Vojtech Pavlik <vojtech@suse.cz> wrote:
>
> Can you check with a current -mm kernel whether any of the issues is
> still there? Everything seems to work smoothly with my ALPS.
>
I have problems with ALPS and 2.6.11-mm1. If I move the pointer with
the touchpad, it activates button modifiers at the same time. (xev
reports a MotionNotify event with state = 0x600 or sometimes 0x200
instead of the expected 0x0).
Moreover the pointer sometimes jump at the bottom right of the screen.
It worked fine with 2.6.11-rc5-mm1.
relevant portion of dmesg:
- with rc5:
Linux version 2.6.11-rc5-mm1 (tonfa@casaverde) (gcc version
3.4.3-20050110 (Gentoo Linux 3. 4.3.20050110,
ssp-3.4.3.20050110-0, pie-8.7.7)) #2 Tue Mar 1 13:33:05 CET 2005
input: AT Translated Set 2 keyboard on isa0060/serio0
ALPS Touchpad (Dualpoint) detected
Enabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
- with .11
Linux version 2.6.11-mm1 (tonfa@casaverde) (gcc version 3.4.3-20050110
(Gentoo Linux 3.4.3. 20050110, ssp-3.4.3.20050110-0,
pie-8.7.7)) #5 Fri Mar 4 16:49:47 CET 2005
input: AT Translated Set 2 keyboard on isa0060/serio0
Enabling hardware tapping
input: DualPoint Stick on isa0060/serio1
input: AlpsPS/2 ALPS DualPoint TouchPad on isa0060/serio1
I hope it can help.
Benoit
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: lspci.log --]
[-- Type: text/x-log; name="lspci.log", Size: 5206 bytes --]
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable)
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: e8000000-efffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf80 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf40 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf20 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 011d
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at f4fffc00 (32-bit, non-prefetchable)
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: f6000000-fbffffff
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at bfa0 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
Subsystem: Dell: Unknown device 011d
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at b800
I/O ports at bc40 [size=64]
Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Conexant: Unknown device 5422
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at b400
I/O ports at b080 [size=128]
Capabilities: <available only to root>
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02) (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 011d
Flags: bus master, VGA palette snoop, stepping, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at e8000000 (32-bit, prefetchable)
I/O ports at c000 [size=256]
Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
Subsystem: Dell: Unknown device 865d
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at faff0000 (64-bit, non-prefetchable)
Capabilities: <available only to root>
0000:02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Dell: Unknown device 011d
Flags: slow devsel, IRQ 255
Memory at 20001000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
0000:02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
Subsystem: Dell: Unknown device 011d
Flags: slow devsel, IRQ 255
Memory at 20002000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
0000:02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corporation: Unknown device 2722
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fafef000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
[-- Attachment #3: config.gz --]
[-- Type: application/gzip, Size: 9034 bytes --]
next prev parent reply other threads:[~2005-03-04 22:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-24 23:29 ALPS tapping disabled. WHY? Ian E. Morgan
2005-02-25 3:08 ` Dmitry Torokhov
2005-02-27 7:50 ` Vojtech Pavlik
2005-02-28 22:23 ` Ian E. Morgan
2005-03-01 11:40 ` David Ford
2005-03-01 11:54 ` Vojtech Pavlik
2005-03-04 21:02 ` Benoit Boissinot [this message]
2005-03-04 21:13 ` New ALPS code in -mm Vojtech Pavlik
2005-03-07 7:14 ` Daniel Barkalow
2005-03-07 7:30 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f323d005030413024d71e3f9@mail.gmail.com \
--to=bboissin@gmail.com \
--cc=akpm@osdl.org \
--cc=dtor_core@ameritech.net \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox