From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268324AbUHFV67 (ORCPT ); Fri, 6 Aug 2004 17:58:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268314AbUHFV67 (ORCPT ); Fri, 6 Aug 2004 17:58:59 -0400 Received: from s124.mittwaldmedien.de ([62.216.178.24]:40091 "EHLO s124.mittwaldmedien.de") by vger.kernel.org with ESMTP id S268324AbUHFV6k (ORCPT ); Fri, 6 Aug 2004 17:58:40 -0400 Message-ID: <4113FF09.6050806@vcd-berlin.de> Date: Fri, 06 Aug 2004 23:58:33 +0200 From: Elmar Hinz User-Agent: Mozilla Thunderbird 0.5 (X11/20040306) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Alan Cox Cc: linux-kernel@vger.kernel.org Subject: Re: PATCH: Add support for IT8212 IDE controllers References: <2obsK-5Ni-13@gated-at.bofh.it> <4110ECBF.9070000@vcd-berlin.de> <20040805104700.GB11584@devserv.devel.redhat.com> In-Reply-To: <20040805104700.GB11584@devserv.devel.redhat.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Alan Cox wrote: > On Wed, Aug 04, 2004 at 04:03:43PM +0200, Elmar Hinz wrote: > >>When I set in the bios RAID 1 there comes an message similar >>INVALID GEOMETRY: 0 PHYSICAL HEADS? >>and booting stops. > > > At which point > > >>but booting continous and I can use the disks. >>hdparm => 15.70 MB/sec > > > A bit slow.. thanks > > I am sorry. I can't test the card in the RAID mode anymore, because it is in use meanwhile with NORMAL mode an a software raid. Maybe the output of dmesg in NORMAL mode is usefull for you. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx IT8212: IDE controller at PCI slot 0000:00:09.0 PCI: Found IRQ 10 for device 0000:00:09.0 PCI: Sharing IRQ 10 with 0000:00:01.2 (Changing the slots IRQ by bios alters both devices 0000:00:01.2 and 0000:00:09.0, so they seem to belong both to the card/disks) IT8212: chipset revision 17 IT8212: 100% native mode on irq 10 ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:pio it8212: controller in smart mode. it8212: BIOS seleted a 66MHz clock. ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:DMA, hdh:pio it8212: BIOS seleted a 66MHz clock. hde: WDC WD800JB-00FMA0, ATA DISK drive ide2 at 0xd400-0xd407,0xd002 on irq 10 hdg: WDC WD800JB-00FMA0, ATA DISK drive ide3 at 0xb800-0xb807,0xb402 on irq 10 hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hde: max request size: 128KiB hde: recal_intr: status=0x51 { DriveReady SeekComplete Error } hde: recal_intr: error=0x04 { DriveStatusError } hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hde: irq timeout: status=0xd0 { Busy } /dev/ide/host2/bus0/target0/lun0: p1 < p5 p6 p7 p8 > hdg: max request size: 128KiB hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error } hdg: recal_intr: error=0x04 { DriveStatusError } hdg: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hdg: irq timeout: status=0xd0 { Busy } /dev/ide/host2/bus1/target0/lun0: p1 < p5 p6 p7 p8 >