From: Tupshin Harper <tupshin@tupshin.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: /dev/hdl not showing up because of fix-ide-probe-double-detection patch
Date: Mon, 09 Aug 2004 11:19:20 -0700 [thread overview]
Message-ID: <4117C028.7080905@tupshin.com> (raw)
In-Reply-To: <1091720165.8041.4.camel@localhost.localdomain>
Alan Cox wrote:
> Two disks are not permitted to have the same serial number. If you can
>
>give me the full ident data I'll take a detailed look - could be I'm not
>comparing enough bytes if its only different on the last digit.
>
>Alan
>
>
>
I originally thought that the problem might be not enough bytes being
checked, but now I'm concerned that Maxtor has some problem with not
having a proper serial number recorded for some drives. hdparm -i also
show M0000000000000000000 for both of these drives. Below is the output
of hdparm -i for the two drives, and below that, the output of catting
/dev/ide/hdk and hdl.
Doing a google search on "M0000000000000000000" shows that there have a
been a handful of reports of maxtor drives showing this as the serial
number, but I don't see any explanation of why.
-Tupshin
hdparm -i /dev/hdl
/dev/hdl:
Model=Maxtor 4R120L0, FwRev=RAMB1TU0, SerialNo=M0000000000000000000
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
rescue:/home/tupshin# hdparm -i /dev/hdk
/dev/hdk:
Model=Maxtor 4R120L0, FwRev=RAMB1TU0, SerialNo=M0000000000000000000
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
cat /proc/ide/hdl/identify
0040 3fff c837 0010 0000 0000 003f 0000
0000 0000 4d30 3030 3030 3030 3030 3030
3030 3030 3030 3030 0003 1000 0039 5241
4d42 3154 5530 4d61 7874 6f72 2034 5231
3230 4c30 2020 2020 2020 2020 2020 2020
2020 2020 2020 2020 2020 2020 2020 8010
0000 2f00 4000 0200 0000 0007 3fff 0010
003f fc10 00fb 0110 f780 0e4f 0000 0007
0003 0078 0078 0078 0078 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
00fe 001e 7c6b 7b09 4003 7c68 3a01 4003
407f 0000 0000 0000 fffe 6b00 c0c0 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0001 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0001 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 8aa5
cat /proc/ide/hdk/identify
0040 3fff c837 0010 0000 0000 003f 0000
0000 0000 4d30 3030 3030 3030 3030 3030
3030 3030 3030 3030 0003 1000 0039 5241
4d42 3154 5530 4d61 7874 6f72 2034 5231
3230 4c30 2020 2020 2020 2020 2020 2020
2020 2020 2020 2020 2020 2020 2020 8010
0000 2f00 4000 0200 0000 0007 3fff 0010
003f fc10 00fb 0110 f780 0e4f 0000 0007
0003 0078 0078 0078 0078 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
00fe 001e 7c6b 7b09 4003 7c68 3a01 4003
407f 0000 0000 0000 fffe 603b c0c0 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0001 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0001 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 5aa5
next prev parent reply other threads:[~2004-08-09 18:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-03 22:38 /dev/hdl not showing up with 2.6.8-rc2-mm1 Tupshin Harper1
2004-08-04 22:37 ` /dev/hdl not showing up because of fix-ide-probe-double-detection patch Tupshin Harper1
2004-08-05 5:47 ` Andrew Morton
2004-08-05 15:36 ` Alan Cox
2004-08-05 23:04 ` Mark Lord
2004-08-05 23:58 ` Alan Cox
2004-08-09 18:19 ` Tupshin Harper [this message]
2004-08-09 19:06 ` Alan Cox
2004-08-09 20:39 ` Joel Jaeggli
2004-08-09 20:18 ` Eric Mudama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4117C028.7080905@tupshin.com \
--to=tupshin@tupshin.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox