From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S267271AbUHWElN (ORCPT ); Mon, 23 Aug 2004 00:41:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S267354AbUHWElB (ORCPT ); Mon, 23 Aug 2004 00:41:01 -0400 Received: from smtp-out1.blueyonder.co.uk ([195.188.213.4]:54601 "EHLO smtp-out1.blueyonder.co.uk") by vger.kernel.org with ESMTP id S267271AbUHWEke (ORCPT ); Mon, 23 Aug 2004 00:40:34 -0400 Message-ID: <4129753F.5060903@blueyonder.co.uk> Date: Mon, 23 Aug 2004 05:40:31 +0100 From: Sid Boyce Reply-To: sboyce@blueyonder.co.uk User-Agent: Mozilla Thunderbird 0.6 (X11/20040502) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: RE: 2.6.8.1-mm4 Content-Type: multipart/mixed; boundary="------------060302080300070506070607" X-OriginalArrivalTime: 23 Aug 2004 04:40:54.0538 (UTC) FILETIME=[601BA6A0:01C488CB] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------060302080300070506070607 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit It only boots with acpi=off, hangs after outputting "starting sound driver: intel8x0", but looks like an ACPI bug. Tried pci=routeirq and pci=noacpi also. Athlon 3000+/512M, Asus A7N8X-E, nForce2 chipset. Regards Sid. -- Sid Boyce .... Hamradio G3VBV and keen Flyer =====LINUX ONLY USED HERE===== --------------060302080300070506070607 Content-Type: text/plain; name="2681mm4-2" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="2681mm4-2" Linux version 2.6.8.1-mm4 (root@barrabas) (gcc version 3.3.3 (SuSE Linux)) #3 Mon Aug 23 02:31:00 BST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7640 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/hda1 vga=0x31a desktop /dev/hdb=ide-cd splash=silent 3 console=ttyS1 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2162.945 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514232k/524224k available (2337k kernel code, 9484k reserved, 1239k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 3000+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0117 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................................................................................................................................................................................... Table [DSDT](id F004) - 701 Objects with 75 Devices 260 Methods 27 Regions ACPI Namespace successfully loaded at root c04ce65c evxfevnt-0093 [03] acpi_enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 evgpeblk-0980 [07] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs at 0000000000004020 on int 0x9 evgpeblk-0989 [07] ev_create_gpe_block : Found 9 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-0980 [07] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs at 00000000000044A0 on int 0x9 evgpeblk-0989 [07] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:........................................................................ Initialized 27/27 Regions 1/1 Fields 28/28 Buffers 16/24 Packages (710 nodes) Executing all Device _STA and_INI methods:.............................................................................. 78 Devices found containing: 78 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbef0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf20, dseg 0xf0000 PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, size 5120k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:dfe0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device Machine check exception polling timer started. cpufreq: Detected nForce2 chipset revision C1 cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss. cpufreq: FSB currently at 166 MHz, FID 13.0 cpufreq: Old CPU frequency 2145000 kHz, new 2158000 kHz Warning: CPU frequency is 2145000, cpufreq assumed 2158000 kHz. cpufreq: Changed FSB successfully to 166 cpufreq: Old CPU frequency 2145000 kHz, new 2158000 kHz Warning: CPU frequency is 2145000, cpufreq assumed 2158000 kHz. cpufreq: Changed FSB successfully to 166 audit: initializing netlink socket (disabled) audit(1093233080.628:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ACPI: Processor [CPU0] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 160x64 Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A acpi_floppy_resource: 6 ioports at 0x3f0 acpi_floppy_resource: 1 ioports at 0x3f7 floppy: controller ACPI FDC0 at I/O 0x3f0-0x3f5, 0x3f7-0x3f7 irq 6 dma channel 2 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: HDS722512VLAT80, ATA DISK drive hdb: ATAPI COMBO48XMAX, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Maxtor 6Y160P0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 1024KiB hda: 241254720 sectors (123522 MB) w/7938KiB Cache, CHS=16383/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hdc: max request size: 1024KiB hdc: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hdc: cache flushes supported hdc: hdc1 hdc2 hdb: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 I2O Core - (C) Copyright 1999 Red Hat Software i2o: max_drivers=4 I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software Please email the following PERFCTR INIT lines to mikpe@csd.uu.se To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n PERFCTR INIT: vendor 2, family 6, model 10, stepping 0, clock 2162945 kHz PERFCTR INIT: NITER == 64 PERFCTR INIT: loop overhead is 169 cycles PERFCTR INIT: rdtsc cost is 14.1 cycles (1075 total) PERFCTR INIT: rdpmc cost is 14.3 cycles (1088 total) PERFCTR INIT: rdmsr (counter) cost is 51.9 cycles (3492 total) PERFCTR INIT: rdmsr (evntsel) cost is 52.6 cycles (3541 total) PERFCTR INIT: wrmsr (counter) cost is 79.6 cycles (5267 total) PERFCTR INIT: wrmsr (evntsel) cost is 231.4 cycles (14984 total) PERFCTR INIT: read cr4 cost is 2.3 cycles (321 total) PERFCTR INIT: write cr4 cost is 63.0 cycles (4205 total) PERFCTR INIT: write LVTPC cost is 10.3 cycles (831 total) PERFCTR INIT: sync_core cost is 73.6 cycles (4883 total) perfctr: driver 2.7.5, cpu type AMD K7/K8 at 2162945 kHz NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 192k freed INIT: version 2.85 booting System Boot Control: Running /etc/init.d/boot Mounting /proc filesystem7[?25ldone8[?25h Mounting sysfs on /sys7[?25ldone8[?25h Mounting /dev/pts7[?25ldone8[?25h Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports 7[?25ldone8[?25h[?25hMounting shared memory FS on /dev/shmdone [?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel Checking root file system... fsck 1.34 (25-Jul-2003) [/sbin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/hda1 Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal Blocks (total/free): 29623840/23507954 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished 7[?25ldone8[?25h[?25hActivating device mapper... FATAL: Module dm_mod not found. device-mapper kernel module not loaded: can't create /dev/mapper/control. 7[?25lfailed8[?25h [?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel Checking file systems... fsck 1.34 (25-Jul-2003) Checking all file systems. [/sbin/fsck.reiserfs (1) -- /data1] fsck.reiserfs -a /dev/hdc1 Reiserfs super block in block 16 on 0x1601 of format 3.6 with standard journal Blocks (total/free): 39064047/15341304 by 4096 bytes Filesystem is clean Replaying journal.. Reiserfs journal '/dev/hdc1' in blocks [18..8211]: 0 transactions replayed Checking internal tree..finished 7[?25ldone8[?25hSetting up7[?25ldonedrom: open failed. m8[?25h Mounting local file systems... proccdrom: open failed. on /proc type pcdrom: open failed. roc (rw) tmpfs cdrom: open failed. on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) ^[[?60;9;cmount: you didn't specify a filesystem type for /dev/cdrecorder I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying vfat mount: No medium found mount: you didn't specify a filesystem type for /dev/cdrom I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying vfat mountAdding 2128604k swap on /dev/hda2. Priority:42 extents:1 : mount point /mAdding 3823460k swap on /dev/hdc2. Priority:42 extents:1 edia/cdrom does not exist mount: you didn't specify a filesystem type for /dev/dvd I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying vfat mount: mount point /media/dvd does not exist mount: you didn't specify a filesystem type for /dev/fd0 I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying vfat mount: /dev/fd0 is not a valid block device 7[?25lfailed8[?25h[?25h[?25hLoading required kernel modules 7[?25ldone8[?25hRestore device permissions7[?25ldone8[?25h [?25hRegister IL ExecutablesFATAL: Module binfmt_misc not found. FATAL: Error running install command for binfmt_misc /bin/ilrun: the operating system does not support registration 7[?25lfailed8[?25h Activating remaining swap-devices in /etc/fstab... 7[?25ldone8[?25h[?25hSetting up the CMOS clock7[?25ldone8[?25h [?25h[?25hSetting up timezone data7[?25ldone8[?25h [?25hSetting scheduling timeslices 7[?25lunused8[?25h Setting up hostname 'barrabas'7[?25ldone8[?25h Setting up loopback interface lo lo IP address: 127.0.0.1/8 7[?25ldone8[?25h [?25hEnabling syn flood protectiondone Disabling IP forwarding7[?25ldone8[?25h Creating /var/log/boot.msg 7[?25ldone8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel [?25hSystem Boot Control: The system has been set up Failed features: boot.pnet Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local 7[?25ldone8[?25hINIT: Entering runlevel: 3 Boot logging started on /dev/ttyS1(/dev/console) at Mon Aug 23 04:52:01 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 3 Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)7[?25ldone8[?25h Initializing random number generator7[?25ldone8[?25h [?25hcoldplug scanning input: **7[?25ldone8[?25h scanning pci: *WWWWW******WWforcedeth.c: Reverse Engineered nForce ethernet driver. Ve*rsion 0.28. .ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 Unable to handle kernel paging request at virtual address c048d230 printing eip: c048d2*30 *pde = 004e8027 *pte = 0048d000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: forcedeth vfat fat CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 (2.6.8.1-mm4) EIP is at assign_irq_vector+0x0/0xa0 eax: 00000016 ebx: 00000016 ecx: 00000016 edx: c04b7fc8 esi: 00000001 edi: d9fd9dc8 ebp: d9fd9dd4 esp: d9fd9d90 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 1753, threadinfo=d9fd8000 task=d7907a60) Stack: c0115063 00200000 0000026e d9fd9dd4 00000000 00000016 d9fd9dd8 c023643e 00200000 0000010d 00000016 00000000 00018900 01000000 00000016 00000016 00000000 d9fd9e04 c01131bb 00000001 00000000 00000000 00400000 00000016 Call Trace: [] show_stack+0xa6/0xb0 [] show_registers+0x14d/0x1c0 [] die+0xf0/0x180 [] do_page_fault+0x417/0x5bb [] error_code+0x2d/0x38 [] mp_register_gsi+0x11b/0x140 [] acpi_register_gsi+0x8b/0xb0 [] acpi_pci_irq_enable+0x191/0x1fe [] pcibios_enable_device+0x17/0x20 [] pci_enable_device_bars+0x21/0x40 [] pci_enable_device+0x17/0x40 [] nv_probe+0x9e/0x620 [forcedeth] [] pci_device_probe_static+0x47/0x70 [] __pci_device_probe+0x37/0x50 [] pci_device_probe+0x26/0x50 [] bus_match+0x35/0x70 [] driver_attach+0x4f/0x90 [] bus_add_driver+0x83/0xb0 [] driver_register+0x2b/0x30 [] pci_register_driver+0x59/0x80 [] init_nic+0x24/0x30 [forcedeth] [] sys_init_module+0xd6/0x220 [] sysenter_past_esp+0x52/0x71 Code: Bad EIP value. **W7[?25ldone8[?25h scanning usb: <6>usbcore: registered new driver usbfs usbcore: registered new driver hub 7[?25ldone8[?25h . . . . . . . . . . . . . . . . . . . . . . . .7[?25ldone8[?25h [?25hSetting up network interfaces: lo lo IP address: 127.0.0.1/8 7[?25ldone8[?25hWaiting for mandatory devices: eth-id-00:0e:a6:48:32:5c 20 19 Linux agpgart interface v0.100 (c) Dave Jones ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 18 17 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 16 ieee1394: Initialized config rom entry `ip1394' 15 14 13 12 11 9 8 7 6 5 4 3 2 1 0 eth-id-00:0e:a6:48:32:5c No interface found 7[?25lfailed8[?25hSetting up service network . . . . . . . . . . . . . . . .7[?25lfailed8[?25h [?25hStarting syslog services7[?25ldone8[?25h [?25hMount SMB/ CIFS File Systems unused Starting RPC portmap daemon7[?25ldone8[?25h Starting resource manager7[?25ldone8[?25h [?25hStarting nfsboot (sm-notify) 7[?25ldone8[?25h [?25hStarting SSH daemon7[?25ldone8[?25h Starting service MySQL 7[?25ldone8[?25h ACPI: Power Button (FF) [PWRF] NET: Registered protocol family 10 Disabled Privacy Extensions on device c03f6a40(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device d6a44c00(sit0) cpufreq: Old CPU frequency 2158000 kHz, new 2132000 kHz cpufreq: Changed FSloading ACPI modules (ac batteryB button ) Starting powersaved 7[?25lDdoneu8[?25h ccessfully to 164 cpufreq: OldStarting sound driver: intel8x0 CPU frequency 2132000 kHz, new 2106000 kHz cpufreq: Changed FSB successfully to 162 cpufreq: Old CPU frequency 2106000 kHz, new 2080000 kHz cpufreq: Changed FSB successfully to 160 cpufreq: Old CPU frequency 2080000 kHz, new 2054000 kHz cpufreq: Changed FSB successfully to 158 cpufreq: Old CPU frequency 2054000 kHz, new 2028000 kHz cpufreq: Changed FSB successfully to 156 cpufreq: Old CPU frequency 2028000 kHz, new 2002000 kHz cpufreq: Changed FSB successfully to 154 cpufreq: Old CPU frequency 2002000 kHz, new 1976000 kHz cpufreq: Changed FSB successfully to 152 cpufreq: Old CPU frequency 1976000 kHz, new 1950000 kHz cpufreq: Changed FSB successfully to 150 ^[SysRq : Show State SysRq : Show Regs SysRq : Emergency Sync SysRq : Emergency Remount R/O SysRq : Resetting Oops: 0000 [#2] PREEMPT DEBUG_PAGEALLOC Modules linked in: ipv6 button battery ac snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sk98lin ohci1394 ieee1394 ehci_hcd ohci_hcd nvidia_agp agpgart evdev usbcore forcedeth vfat fat CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.8.1-mm4) EIP is at find_isa_irq_pin+0x0/0x80 eax: 00000000 ebx: c03f2b88 ecx: 0000003f edx: 00000003 esi: 00000062 edi: 00000000 ebp: c0481e54 esp: c0481e3c ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c0480000 task=c03a9a60) Stack: c0114aa0 0000007b 0000007b c03f2b88 00000062 00000000 c0481e68 c0112f8d c011bec8 c03f2b88 00000062 c0481e8c c0261984 c037e8b4 c037d1e0 00000001 c0481fa0 00000001 deba3ec4 00000030 c0481ea8 c025b913 c0481fa0 00000001 Call Trace: [] show_stack+0xa6/0xb0 [] show_registers+0x14d/0x1c0 [] die+0xf0/0x180 [] do_page_fault+0x417/0x5bb [] error_code+0x2d/0x38 [] machine_restart+0xd/0x80 [] __handle_sysrq+0x64/0xe0 [] kbd_event+0xd3/0x100 [] input_event+0x162/0x3b0 [] atkbd_report_key+0x2f/0x70 [] atkbd_interrupt+0x23a/0x600 [] serio_interrupt+0x3e/0xa2 [] i8042_interrupt+0xab/0x130 [] handle_IRQ_event+0x30/0x60 [] do_IRQ+0xa9/0x170 [] common_interrupt+0x18/0x20 [] cpu_idle+0x2d/0x40 [] start_kernel+0x17a/0x1c0 [] 0xc010019f Code: Bad EIP value. <0>Kernel panic - not syncing: Fatal exception in interrupt --------------060302080300070506070607--