From: Frank Steiner <fsteiner-mail@bio.ifi.lmu.de>
To: Mark Broadbent <markb@wetlettuce.com>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.8.1: ip auto-config accepts wrong packages
Date: Wed, 25 Aug 2004 16:41:28 +0200 [thread overview]
Message-ID: <412CA518.7090109@bio.ifi.lmu.de> (raw)
In-Reply-To: <1093439062.25506.12.camel@mbpc.signal.qinetiq.com>
Hi Mark,
Mark Broadbent wrote:
> On Wed, 2004-08-25 at 10:40, Frank Steiner wrote:
> Try enabling the debug messaging in the ipconfig code. Edit the file
> net/ipv4/ipconfig.c just below the #include's and change the line
>
> #undef IPCONFIG_DEBUG
>
> to
>
> #define IPCONFIG_DEBUG
>
> and rebuild. Post the outputs from both machines when you see this
> effect again.
the output is exactly the same on both machines! On the one machine that
went through (because it got the IP first) I got the output from dmesg,
printed it and compared it to the both boot screens. And they are really
identical.
I didn't see any option (or "extension") that contains the mac address.
Could that be the problem? Do I have to tell the server that the mac
address must be in the request-list?
cu,
Frank
IP-Config: Entered.
IP-Config: eth0 UP (able=1, xid=07196018)
Sending DHCP requests .DHCP: Sending message type 1
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
DHCP: Got message type 2
DHCP: Offered address 141.84.1.168 by server 141.84.1.132
DHCP/BOOTP: Got extension 53: 02
DHCP/BOOTP: Got extension 54: 8d 54 01 84
DHCP/BOOTP: Got extension 51: 00 00 1c 20
DHCP/BOOTP: Got extension 1: ff ff ff 80
DHCP/BOOTP: Got extension 3: 8d 54 01 82
DHCP/BOOTP: Got extension 6: 81 bb d6 87
DHCP/BOOTP: Got extension 12: 72 61 64 6f
DHCP/BOOTP: Got extension 15: 62 69 6f 2e 69 66 69 2e 6c 6d 75 2e 64 65
DHCP/BOOTP: Got extension 17: 2f
DHCP/BOOTP: Got extension 28: 8d 54 01 ff
DHCP/BOOTP: Got extension 208: f1 00 74 7e
DHCP/BOOTP: Got extension 209: 70 78 65 6c 69 6e 75 78 2e 63 66 67 2e 72 61 64 6f
DHCP/BOOTP: Got extension 210: 68 6f 73 74 73 2f
,DHCP: Sending message type 3
DHCP: Got message type 5
DHCP/BOOTP: Got extension 53: 05
DHCP/BOOTP: Got extension 54: 8d 54 01 84
DHCP/BOOTP: Got extension 51: 00 00 1c 20
DHCP/BOOTP: Got extension 1: ff ff ff 80
DHCP/BOOTP: Got extension 3: 8d 54 01 82
DHCP/BOOTP: Got extension 6: 81 bb d6 87
DHCP/BOOTP: Got extension 12: 72 61 64 6f
DHCP/BOOTP: Got extension 15: 62 69 6f 2e 69 66 69 2e 6c 6d 75 2e 64 65
DHCP/BOOTP: Got extension 17: 2f
DHCP/BOOTP: Got extension 28: 8d 54 01 ff
DHCP/BOOTP: Got extension 208: f1 00 74 7e
DHCP/BOOTP: Got extension 209: 70 78 65 6c 69 6e 75 78 2e 63 66 67 2e 72 61 64 6f
DHCP/BOOTP: Got extension 210: 68 6f 73 74 73 2f
OK
IP-Config: Got DHCP answer from xxx.xxx.1.132, my address is xxx.xxx.1.168
IP-Config: Complete:
device=eth0, addr=xxx.xxx.1.168, mask=255.255.255.128, gw=xxx.xxx.1.130,
host=rado, domain=xxx nis-domain=(none),
bootserver=xxx.xxx.1.132, rootserver=xxx.xxx.1.132, rootpath=/
--
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17 Phone: +49 89 2180-4049
80333 Muenchen, Germany Fax: +49 89 2180-99-4049
next prev parent reply other threads:[~2004-08-25 14:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-25 9:40 2.6.8.1: ip auto-config accepts wrong packages Frank Steiner
2004-08-25 13:04 ` Mark Broadbent
2004-08-25 14:41 ` Frank Steiner [this message]
2004-08-25 15:47 ` Mark Broadbent
2004-08-26 6:39 ` Frank Steiner
2004-08-26 10:31 ` Frank Steiner
2004-08-26 16:17 ` Randy.Dunlap
2004-08-27 11:42 ` Frank Steiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=412CA518.7090109@bio.ifi.lmu.de \
--to=fsteiner-mail@bio.ifi.lmu.de \
--cc=linux-kernel@vger.kernel.org \
--cc=markb@wetlettuce.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox