From: Pierre Ossman <drzeus-list@drzeus.cx>
To: Pavel Machek <pavel@suse.cz>
Cc: seife@suse.de, LKML <linux-kernel@vger.kernel.org>
Subject: Re: HP/Compaq (Winbond) SD/MMC reader supported
Date: Tue, 14 Sep 2004 06:22:46 +0200 [thread overview]
Message-ID: <41467216.6070508@drzeus.cx> (raw)
In-Reply-To: <20040913223827.GA28524@elf.ucw.cz>
Pavel Machek wrote:
>
>
>Hmm, it does something here on my nx5000... It causes 2 "bad parity
>from KBD" errors and then freezes boot. But the chip is detected and I
>see
>
>mmc0: W83L51xD id f00 at 0x248 irq 1 dma 0
>
>message. (How do I guess right values for irq? I thought that
>interference with keyboard means it uses irq 1, but it is probably not
>the case, and default values did not work, too).
>
>I'll try turning off ALSA because it actually freezes machine only
>after alsa is loaded.
>
>
You seem to be running an old version of the driver. The ports for the
driver are also often populated by SuperIO chip. The detection routine
was a bit optimistic in the earlier versions so it started resetting the
wrong hardware.
As of writing the latest version is 0.7 and a patch can be downloaded at:
http://projects.drzeus.cx/wbsd/download.php?get=files/wbsd-0.7.patch
Rgds
Pierre
next prev parent reply other threads:[~2004-09-14 4:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-03 9:44 HP/Compaq (Winbond) SD/MMC reader supported Pierre Ossman
2004-09-13 22:38 ` Pavel Machek
2004-09-14 4:22 ` Pierre Ossman [this message]
2004-09-14 14:52 ` Pavel Machek
2004-09-14 15:00 ` Pavel Machek
2004-09-14 15:16 ` Pierre Ossman
2004-09-14 15:24 ` Pavel Machek
2004-09-14 15:47 ` Stefan Seyfried
2004-09-14 15:52 ` Pavel Machek
2004-09-14 16:04 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41467216.6070508@drzeus.cx \
--to=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@suse.cz \
--cc=seife@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox