* usb on amd-756 broken since 2.6.6
@ 2004-10-02 13:02 Gerard H. Pille
2004-10-02 17:08 ` Alan Cox
0 siblings, 1 reply; 2+ messages in thread
From: Gerard H. Pille @ 2004-10-02 13:02 UTC (permalink / raw)
To: linux-kernel
hallo,
The last kernel on which I could succesfully mount /proc/bus/usb and
"cat /proc/bus/usb/devices" is 2.6.5, since then, the cat hangs. I am
not sure if the trouble starts with 2.6.6 or 2.6.7, since I can not boot
with 2.6.6, the boot hangs on the hdd, a cdrom. If I could find patches
to get 2.6.6 working, I might be able to further narrow it down.
In /var/log/messages, I only see this "kernel: usb 1-2: control timeout
on ep0in".
Linux GHP-AMD650 2.6.8.1 #1 Sat Oct 2 13:28:38 CEST 2004 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
binutils 2.13.90.0.18
util-linux 2.11n
mount 2.11n
module-init-tools 3.0-pre10
e2fsprogs 1.27
PPP 2.4.1
nfs-utils 1.0
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded snd_pcm_oss snd_pcm snd_page_alloc snd_timer
snd_mixer_oss snd ipt_LOG ipt_limit ipt_TCPMSS ipt_MASQUERADE ipt_state
iptable_nat ip_conntrack iptable_filter ip_tables parport_pc lp parport
af_packet ppp_async crc_ccitt ppp_generic slhc 8139too mii crc32
ohci_hcd usbcore rtc unix
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 648.946
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1277.95
# lsmod
Module Size Used by
snd_pcm_oss 61704 0
snd_pcm 103296 1 snd_pcm_oss
snd_page_alloc 12360 1 snd_pcm
snd_timer 26368 1 snd_pcm
snd_mixer_oss 19904 1 snd_pcm_oss
snd 61444 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
ipt_LOG 6656 4
ipt_limit 3008 4
ipt_TCPMSS 4800 1
ipt_MASQUERADE 4224 2
ipt_state 2560 4
iptable_nat 24996 2 ipt_MASQUERADE
ip_conntrack 36036 3 ipt_MASQUERADE,ipt_state,iptable_nat
iptable_filter 3264 1
ip_tables 17872 7
ipt_LOG,ipt_limit,ipt_TCPMSS,ipt_MASQUERADE,ipt_state,iptable_nat,iptable_filter
parport_pc 33824 1
lp 10820 2
parport 41792 2 parport_pc,lp
af_packet 21700 4
ppp_async 11648 1
crc_ccitt 2432 1 ppp_async
ppp_generic 26444 5 ppp_async
slhc 7808 1 ppp_generic
8139too 23680 0
mii 5376 1 8139too
crc32 4544 1 8139too
ohci_hcd 33280 0
usbcore 123860 3 ohci_hcd
rtc 12488 0
unix 27852 219
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5008-500b : ACPI timer
5010-5015 : ACPI CPU throttle
d000-d003 : 0000:00:00.0
d400-d4ff : 0000:00:08.0
d400-d4ff : 8139too
d800-d87f : 0000:00:09.0
dc00-dc0f : 0000:00:09.1
e000-e0ff : 0000:00:0b.0
e000-e0ff : 8139too
f000-f00f : 0000:00:07.1
f000-f007 : ide0
f008-f00f : ide1
# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-0026182a : Kernel code
0026182b-0032853f : Kernel data
17ff0000-17ff2fff : ACPI Non-volatile Storage
17ff3000-17ffffff : ACPI Tables
d0000000-d7ffffff : 0000:00:00.0
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : 0000:01:05.0
e0000000-e1ffffff : PCI Bus #01
e0000000-e0ffffff : 0000:01:05.0
e3000000-e300ffff : 0000:00:0a.0
e3010000-e30100ff : 0000:00:08.0
e3010000-e30100ff : 8139too
e3011000-e3011fff : 0000:00:00.0
e3012000-e3012fff : 0000:00:07.4
e3012000-e3012fff : ohci_hcd
e3013000-e30130ff : 0000:00:0b.0
e3013000-e30130ff : 8139too
ffff0000-ffffffff : reserved
# lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller (rev 25)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e3011000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d000 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
(rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
(rev 03) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 11
Region 0: Memory at e3012000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at e3010000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A
[FM801] (rev b1)
Subsystem: Fortemedia, Inc: Unknown device 1319
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=128]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Gameport controller: Fortemedia, Inc Xwave QS3000A [FM801 game
port] (rev b1) (prog-if 10 [Extended])
Subsystem: Fortemedia, Inc: Unknown device 1319
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 10000ns max)
Region 0: I/O ports at dc00 [size=16]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Serial controller: Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01) (prog-if 00 [8250])
Subsystem: GVC Corporation IBM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e3013000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev a1) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c60
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Any advice would, as usually, be very well come.
Geert
PS. my actual address is g dot h dot p at s k y n e t dot be
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: usb on amd-756 broken since 2.6.6
2004-10-02 13:02 usb on amd-756 broken since 2.6.6 Gerard H. Pille
@ 2004-10-02 17:08 ` Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2004-10-02 17:08 UTC (permalink / raw)
To: Gerard H. Pille; +Cc: Linux Kernel Mailing List, greg
On Sad, 2004-10-02 at 14:02, Gerard H. Pille wrote:
> The last kernel on which I could succesfully mount /proc/bus/usb and
> "cat /proc/bus/usb/devices" is 2.6.5, since then, the cat hangs. I am
> not sure if the trouble starts with 2.6.6 or 2.6.7, since I can not boot
> with 2.6.6, the boot hangs on the hdd, a cdrom. If I could find patches
> to get 2.6.6 working, I might be able to further narrow it down.
>
> In /var/log/messages, I only see this "kernel: usb 1-2: control timeout
> on ep0in".
This is not AMD specific - the core USB code is broken in the event of
that control timeout occuring. I see the same hang on an Intel ICH6M
platform.
I've done a quick review of the semaphores and didn't see an obvious
cause although I did find a glaring error on a different unused path.
(Oh and although it isn't fixed - that isnt how busses pluralises either
)
--- drivers/usb/core/hcd.c~ 2004-10-02 19:01:30.764022672 +0100
+++ drivers/usb/core/hcd.c 2004-10-02 19:01:30.784019632 +0100
@@ -708,6 +708,7 @@
bus->busnum = busnum;
} else {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
+ up(&usb_bus_list_lock);
return -E2BIG;
}
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-10-02 18:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-02 13:02 usb on amd-756 broken since 2.6.6 Gerard H. Pille
2004-10-02 17:08 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox