* 2.6.9-rc3-mm3 fails to detect aic7xxx @ 2004-10-07 19:40 Dave Hansen 2004-10-07 20:13 ` K.R. Foley 2004-10-07 22:42 ` J.A. Magallon 0 siblings, 2 replies; 18+ messages in thread From: Dave Hansen @ 2004-10-07 19:40 UTC (permalink / raw) To: Andrew Morton; +Cc: Linux Kernel Mailing List, linux-scsi I just booted 2.6.9-rc3-mm3 and got the good ol' VFS: Cannot open root device "sda2" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) backing out bk-scsi.patch seems to fix it. I believe this worked in 2.6.9-rc3-mm2. -- Dave ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 19:40 2.6.9-rc3-mm3 fails to detect aic7xxx Dave Hansen @ 2004-10-07 20:13 ` K.R. Foley 2004-10-07 20:38 ` Luben Tuikov 2004-10-07 20:39 ` Andrew Morton 2004-10-07 22:42 ` J.A. Magallon 1 sibling, 2 replies; 18+ messages in thread From: K.R. Foley @ 2004-10-07 20:13 UTC (permalink / raw) To: Dave Hansen; +Cc: Andrew Morton, Linux Kernel Mailing List, linux-scsi Dave Hansen wrote: > I just booted 2.6.9-rc3-mm3 and got the good ol' > > VFS: Cannot open root device "sda2" or unknown-block(0,0) > Please append a correct "root=" boot option > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(0,0) > > backing out bk-scsi.patch seems to fix it. I believe this worked in > 2.6.9-rc3-mm2. > > -- Dave While I can't verify that backing out bk-scsi.patch fixes it for me yet, I can verify that I get the exact same error trying to boot this kernel. I too am using the aic7xxx. kr ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:13 ` K.R. Foley @ 2004-10-07 20:38 ` Luben Tuikov 2004-10-07 20:45 ` Dave Hansen 2004-10-08 3:53 ` K.R. Foley 2004-10-07 20:39 ` Andrew Morton 1 sibling, 2 replies; 18+ messages in thread From: Luben Tuikov @ 2004-10-07 20:38 UTC (permalink / raw) To: K.R. Foley Cc: Dave Hansen, Andrew Morton, Linux Kernel Mailing List, linux-scsi K.R. Foley wrote: > Dave Hansen wrote: > >> I just booted 2.6.9-rc3-mm3 and got the good ol' >> VFS: Cannot open root device "sda2" or unknown-block(0,0) >> Please append a correct "root=" boot option >> Kernel panic - not syncing: VFS: Unable to mount root fs on >> unknown-block(0,0) >> >> backing out bk-scsi.patch seems to fix it. I believe this worked in >> 2.6.9-rc3-mm2. >> >> -- Dave > > > While I can't verify that backing out bk-scsi.patch fixes it for me yet, > I can verify that I get the exact same error trying to boot this kernel. > I too am using the aic7xxx. It is most likely the PCI ID patch which went into those drivers. You can back out only that change (drivers/scsi/aic7xxx) and try it. (assuming you haven't changed anything else) Luben ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:38 ` Luben Tuikov @ 2004-10-07 20:45 ` Dave Hansen 2004-10-08 3:53 ` K.R. Foley 1 sibling, 0 replies; 18+ messages in thread From: Dave Hansen @ 2004-10-07 20:45 UTC (permalink / raw) To: Luben Tuikov Cc: K.R. Foley, Andrew Morton, Linux Kernel Mailing List, linux-scsi On Thu, 2004-10-07 at 13:38, Luben Tuikov wrote: > It is most likely the PCI ID patch which went into those drivers. > You can back out only that change (drivers/scsi/aic7xxx) and > try it. (assuming you haven't changed anything else) There's a lot of other gunk around there. Is there a patch just for that changeset somewhere? -- Dave ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:38 ` Luben Tuikov 2004-10-07 20:45 ` Dave Hansen @ 2004-10-08 3:53 ` K.R. Foley 1 sibling, 0 replies; 18+ messages in thread From: K.R. Foley @ 2004-10-08 3:53 UTC (permalink / raw) To: Luben Tuikov Cc: Dave Hansen, Andrew Morton, Linux Kernel Mailing List, linux-scsi [-- Attachment #1: Type: text/plain, Size: 5995 bytes --] Luben Tuikov wrote: > K.R. Foley wrote: > >> Dave Hansen wrote: >> >>> I just booted 2.6.9-rc3-mm3 and got the good ol' >>> VFS: Cannot open root device "sda2" or unknown-block(0,0) >>> Please append a correct "root=" boot option >>> Kernel panic - not syncing: VFS: Unable to mount root fs on >>> unknown-block(0,0) >>> >>> backing out bk-scsi.patch seems to fix it. I believe this worked in >>> 2.6.9-rc3-mm2. >>> >>> -- Dave >> >> >> >> While I can't verify that backing out bk-scsi.patch fixes it for me >> yet, I can verify that I get the exact same error trying to boot this >> kernel. I too am using the aic7xxx. > > > It is most likely the PCI ID patch which went into those drivers. > You can back out only that change (drivers/scsi/aic7xxx) and > try it. (assuming you haven't changed anything else) > > Luben I didn't have the time or the energy tonight to try to pick the PCI ID pieces out of the patches. So I just backed out bk-scsi-target.patch and bk-scsi.patch. That resolved my problem. I will be glad to try out any changes that might solve this. I will be glad to provide any other info that I can to help solve this. I don't get any other info about what is going on prior to the failure. Config is attached also. System/Card info is as follows: Dell Precision 620 Dual PIII 933 512M [root@porky root]# /sbin/lspci -v 00:00.0 Host bridge: Intel Corp. 82840 840 (Carmel) Chipset Host Bridge (Hub A) (rev 02) Subsystem: Dell Computer Corporation: Unknown device 0097 Flags: bus master, fast devsel, latency 0 Memory at f0000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 2.0 00:01.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: e8000000-efffffff 00:02.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset PCI Bridge (Hub B) (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=00, secondary=02, subordinate=03, sec-latency=64 Memory behind bridge: fb000000-fbffffff 00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f9000000-faffffff 00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corp. 82801AA IDE Flags: bus master, medium devsel, latency 0 I/O ports at ffa0 [size=16] 00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corp. 82801AA USB Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at ff80 [size=32] 00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02) Subsystem: Intel Corp. 82801AA SMBus Flags: medium devsel, IRQ 10 I/O ports at dcd0 [size=16] 01:00.0 VGA compatible controller: nVidia Corporation NV10GL [Quadro] (rev 10) (prog-if 00 [VGA]) Subsystem: Elsa AG: Unknown device 0c4a Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 9 Memory at fc000000 (32-bit, non-prefetchable) [size=80000000] Memory at e8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at 00010000 [disabled] Capabilities: [60] Power Management version 1 Capabilities: [44] AGP version 2.0 02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 0 Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corp. 82806AA PCI64 Hub APIC Flags: fast devsel 04:04.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0097 Flags: bus master, medium devsel, latency 64, IRQ 9 Memory at f9fff000 (32-bit, non-prefetchable) Memory at f9e00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [40] Power Management version 2 04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0097 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10 BIST result: 00 I/O ports at ec00 [disabled] [size=fa000000] Memory at f9ffe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at 00020000 [disabled] Capabilities: [dc] Power Management version 2 04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0097 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5 BIST result: 00 I/O ports at e800 [disabled] [size=fa000000] Memory at f9ffd000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at 00020000 [disabled] Capabilities: [dc] Power Management version 2 04:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20) Subsystem: Standard Microsystems Corp [SMC] SMC9332BDT EtherPower 10/100 Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at e480 [size=fa000000] Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at 00040000 [disabled] [-- Attachment #2: config --] [-- Type: text/plain, Size: 31218 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.9-rc3-mm3 # Thu Oct 7 22:19:28 2004 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CPUSETS is not set CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_SMP=y CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # # Firmware Drivers # CONFIG_EDD=m # CONFIG_EDD_SKIP_MBR is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_IRQBALANCE=y CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Performance-monitoring counters support # # CONFIG_PERFCTR is not set # CONFIG_KEXEC is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_BLACKLIST_YEAR=0 # # APM (Advanced Power Management) BIOS Support # CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set CONFIG_APM_CPU_IDLE=y # CONFIG_APM_DISPLAY_BLANK is not set CONFIG_APM_RTC_IS_GMT=y # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_TRIFLEX=y CONFIG_BLK_DEV_CY82C693=y # CONFIG_BLK_DEV_CS5520 is not set CONFIG_BLK_DEV_CS5530=y CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_SVWKS=y CONFIG_BLK_DEV_SIIMAGE=y CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=m CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=m # CONFIG_SCSI_3W_9XXX is not set CONFIG_SCSI_7000FASST=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_DPT_I2O is not set CONFIG_SCSI_IN2000=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_EATA_PIO=m CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_GENERIC_NCR5380=m # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_IPS=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set CONFIG_SCSI_PAS16=m CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_ISP=m CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6322 is not set CONFIG_SCSI_SYM53C416=m # CONFIG_SCSI_DC395x is not set CONFIG_SCSI_DC390T=m CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m CONFIG_SCSI_NSP32=m CONFIG_SCSI_DEBUG=m # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=m # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=m # # IP: Virtual Server Configuration # CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=16 # # IPVS transport protocol load balancing support # # CONFIG_IP_VS_PROTO_TCP is not set # CONFIG_IP_VS_PROTO_UDP is not set # CONFIG_IP_VS_PROTO_ESP is not set # CONFIG_IP_VS_PROTO_AH is not set # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m # CONFIG_IP_VS_SED is not set # CONFIG_IP_VS_NQ is not set # # IPVS application helper # CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_TUNNEL=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m # CONFIG_IP_NF_MATCH_IPRANGE is not set CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_PHYSDEV is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set # CONFIG_IP_NF_MATCH_SCTP is not set # CONFIG_IP_NF_MATCH_COMMENT is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m # CONFIG_IP_NF_TARGET_CLASSIFY is not set # CONFIG_IP_NF_RAW is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_IP_NF_COMPAT_IPCHAINS=m CONFIG_IP_NF_COMPAT_IPFWADM=m # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m # CONFIG_IP6_NF_RAW is not set # # Bridge: Netfilter Configuration # # CONFIG_BRIDGE_NF_EBTABLES is not set CONFIG_XFRM=y CONFIG_XFRM_USER=m # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_ATM_BR2684_IPFILTER=y CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=y CONFIG_LTPC=m CONFIG_COPS=m CONFIG_COPS_DAYNA=y CONFIG_COPS_TANGENT=y CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_ATM is not set CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m # CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_KGDBOE is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m CONFIG_ETHERTAP=m # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_SMC9194=m CONFIG_NET_VENDOR_RACAL=y CONFIG_NI52=m CONFIG_NI65=m # # Tulip family network device support # CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set CONFIG_AT1700=m CONFIG_DEPCA=m CONFIG_HP100=m CONFIG_NET_ISA=y CONFIG_E2100=m CONFIG_EWRK3=m CONFIG_EEXPRESS=m CONFIG_EEXPRESS_PRO=m CONFIG_HPLAN_PLUS=m CONFIG_HPLAN=m CONFIG_LP486E=m CONFIG_ETH16I=m CONFIG_NE2000=m # CONFIG_ZNET is not set # CONFIG_SEEQ8005 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m # CONFIG_AMD8111E_NAPI is not set CONFIG_ADAPTEC_STARFIRE=m # CONFIG_ADAPTEC_STARFIRE_NAPI is not set CONFIG_AC3200=m CONFIG_APRICOT=m CONFIG_B44=m # CONFIG_FORCEDETH is not set CONFIG_CS89x0=m CONFIG_DGRS=m # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_E100_NAPI is not set CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set CONFIG_NET_POCKET=y CONFIG_ATP=m CONFIG_DE600=m CONFIG_DE620=m # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m # CONFIG_R8169_NAPI is not set # CONFIG_R8169_VLAN is not set CONFIG_SK98LIN=m # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # CONFIG_TR=y CONFIG_IBMTR=m CONFIG_IBMOL=m CONFIG_IBMLS=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m # CONFIG_SKISA is not set # CONFIG_PROTEON is not set CONFIG_ABYSS=m CONFIG_SMCTR=m # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # # ATM drivers # # CONFIG_ATM_TCP is not set # CONFIG_ATM_LANAI is not set # CONFIG_ATM_ENI is not set # CONFIG_ATM_FIRESTREAM is not set # CONFIG_ATM_ZATM is not set # CONFIG_ATM_NICSTAR is not set # CONFIG_ATM_IDT77252 is not set # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E_MAYBE is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set CONFIG_PPPOE=m CONFIG_PPPOATM=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y CONFIG_NET_FC=y CONFIG_SHAPER=m CONFIG_NETCONSOLE=m # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set # CONFIG_STALDRV is not set # # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_CIRRUS=m # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # # Logo configuration # # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_STORAGE is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_SPEEDTOUCH is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_TEST is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISER4_FS is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set CONFIG_JFS_DEBUG=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set CONFIG_AFS_FS=m CONFIG_RXRPC=m # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Profiling support # CONFIG_PROFILING=y CONFIG_OPROFILE=m # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_FRAME_POINTER is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_4KSTACKS is not set # CONFIG_SCHEDSTATS is not set # CONFIG_LOCKMETER is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # CONFIG_KGDB is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SECLVL is not set # CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_BSDJAIL is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_WP512 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_SERPENT=m # CONFIG_CRYPTO_AES_586 is not set CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_HARDIRQS=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:13 ` K.R. Foley 2004-10-07 20:38 ` Luben Tuikov @ 2004-10-07 20:39 ` Andrew Morton 2004-10-07 20:41 ` Dave Hansen 2004-10-07 20:49 ` K.R. Foley 1 sibling, 2 replies; 18+ messages in thread From: Andrew Morton @ 2004-10-07 20:39 UTC (permalink / raw) To: K.R. Foley; +Cc: haveblue, linux-kernel, linux-scsi "K.R. Foley" <kr@cybsft.com> wrote: > > Dave Hansen wrote: > > I just booted 2.6.9-rc3-mm3 and got the good ol' > > > > VFS: Cannot open root device "sda2" or unknown-block(0,0) > > Please append a correct "root=" boot option > > Kernel panic - not syncing: VFS: Unable to mount root fs on > > unknown-block(0,0) > > > > backing out bk-scsi.patch seems to fix it. I believe this worked in > > 2.6.9-rc3-mm2. > > > > -- Dave > > While I can't verify that backing out bk-scsi.patch fixes it for me yet, > I can verify that I get the exact same error trying to boot this kernel. > I too am using the aic7xxx. > Were some earlier messages printed out, during the scsi bringup stage? A full dmesg dump would be nice. ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:39 ` Andrew Morton @ 2004-10-07 20:41 ` Dave Hansen 2004-10-07 20:49 ` K.R. Foley 1 sibling, 0 replies; 18+ messages in thread From: Dave Hansen @ 2004-10-07 20:41 UTC (permalink / raw) To: Andrew Morton; +Cc: K.R. Foley, Linux Kernel Mailing List, linux-scsi On Thu, 2004-10-07 at 13:39, Andrew Morton wrote: > Were some earlier messages printed out, during the scsi bringup stage? > > A full dmesg dump would be nice. Curiously enough, there were no extra messages. Are there some SCSI debug cmdline things that I should include? kernel --no-mem-option (nd)/dave/vmlinuz root=/dev/sda2 console=ttyS0,57600 pro file=2 mem=512M debug [Linux-bzImage, setup=0xa00, size=0x16b451] Linux version 2.6.9-rc3-mm3 (dave@kernel) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Thu Oct 7 12:32:50 PDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000e7ff9380 (usable) BIOS-e820: 00000000e7ff9380 - 00000000e8000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009dc00 (usable) user: 000000000009dc00 - 00000000000a0000 (reserved) user: 00000000000e0000 - 0000000000100000 (reserved) user: 0000000000100000 - 0000000020000000 (usable) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 0009e1d0 On node 0 totalpages: 131072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126976 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IBM ) @ 0x000fdfd0 ACPI: RSDT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @ 0xe7ffff80 ACPI: FADT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @ 0xe7ffff00 ACPI: MADT (v001 IBM SERASSLT 0x00001001 IBM 0x45444f43) @ 0xe7fffe80 ACPI: DSDT (v001 IBM SERASSLT 0x00001001 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) Processor #3 6:10 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:10 APIC version 17 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 6:10 APIC version 17 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM ENSW Product ID: NF 6000R SMP APIC at: 0xFEE00000 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #13 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 4 Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/sda2 console=ttyS0,57600 profile=2 mem=512M debugkernel profiling enabled (shift: 2) CPU 0 irqstacks, hard=c043c000 soft=c041c000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 699.650 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 511192k/524288k available (1833k kernel code, 12556k reserved, 1161k data, 164k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1376.25 BogoMIPS (lpj=688128) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: 0383fbf7 00000000 00000000 00000040 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Cascades) stepping 01 per-CPU timeslice cutoff: 2927.35 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/0 eip 2000 CPU 1 irqstacks, hard=c043d000 soft=c041d000 Initializing CPU#1 Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: 0383fbf7 00000000 00000000 00000040 CPU1: Intel Pentium III (Cascades) stepping 01 Booting processor 2/1 eip 2000 CPU 2 irqstacks, hard=c043e000 soft=c041e000 Initializing CPU#2 Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: 0383fbf7 00000000 00000000 00000040 CPU2: Intel Pentium III (Cascades) stepping 01 Booting processor 3/2 eip 2000 CPU 3 irqstacks, hard=c043f000 soft=c041f000 Initializing CPU#3 Calibrating delay loop... 1396.73 BogoMIPS (lpj=698368) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: 0383fbf7 00000000 00000000 00000040 CPU3: Intel Pentium III (Cascades) stepping 01 Total of 4 processors activated (5566.46 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd32c, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered peer bus 02 PCI: Discovered peer bus 05 PCI->APIC IRQ transform: (B0,I5,P0) -> 16 PCI->APIC IRQ transform: (B0,I15,P0) -> 19 PCI->APIC IRQ transform: (B2,I1,P0) -> 17 PCI->APIC IRQ transform: (B2,I1,P1) -> 18 PCI->APIC IRQ transform: (B2,I5,P0) -> 24 PCI->APIC IRQ transform: (B5,I2,P0) -> 21 PCI->APIC IRQ transform: (B5,I2,P1) -> 26 PCI->APIC IRQ transform: (B6,I4,P0) -> 22 PCI->APIC IRQ transform: (B6,I5,P0) -> 27 PCI->APIC IRQ transform: (B6,I6,P0) -> 28 PCI->APIC IRQ transform: (B6,I7,P0) -> 29 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. Starting balanced_irq Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.3.19-k2 Copyright (c) 1999-2004 Intel Corporation. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de pcnet32: PCnet/FAST III 79C975 at 0x2200, 00 02 55 fc 43 20 assigned IRQ 16. eth2: registered as PCnet/FAST III 79C975 pcnet32: 1 cards_found. e100: Intel(R) PRO/100 Network Driver, 3.1.4-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation e100: eth3: e100_probe: addr 0xefbfd000, irq 24, MAC addr 00:90:27:EE:90:09 st: Version 20040403, fixed bufsize 32768, s/g segs 256 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Cannot open root device "sda2" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) -- Dave ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 20:39 ` Andrew Morton 2004-10-07 20:41 ` Dave Hansen @ 2004-10-07 20:49 ` K.R. Foley 1 sibling, 0 replies; 18+ messages in thread From: K.R. Foley @ 2004-10-07 20:49 UTC (permalink / raw) To: Andrew Morton; +Cc: haveblue, linux-kernel, linux-scsi Andrew Morton wrote: > "K.R. Foley" <kr@cybsft.com> wrote: > >>Dave Hansen wrote: >> >>>I just booted 2.6.9-rc3-mm3 and got the good ol' >>> >>>VFS: Cannot open root device "sda2" or unknown-block(0,0) >>>Please append a correct "root=" boot option >>>Kernel panic - not syncing: VFS: Unable to mount root fs on >>>unknown-block(0,0) >>> >>>backing out bk-scsi.patch seems to fix it. I believe this worked in >>>2.6.9-rc3-mm2. >>> >>>-- Dave >> >>While I can't verify that backing out bk-scsi.patch fixes it for me yet, >>I can verify that I get the exact same error trying to boot this kernel. >>I too am using the aic7xxx. >> > > > Were some earlier messages printed out, during the scsi bringup stage? > > A full dmesg dump would be nice. > Yes it would. Unfortunately I am not near the machine right now. I do know that there is not much info being displayed prior to the failure message listed above and I don't have a serial console on this system currently. I will be glad to try to dig into it further when I get home in a few hours. kr ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 19:40 2.6.9-rc3-mm3 fails to detect aic7xxx Dave Hansen 2004-10-07 20:13 ` K.R. Foley @ 2004-10-07 22:42 ` J.A. Magallon 2004-10-08 3:57 ` K.R. Foley 1 sibling, 1 reply; 18+ messages in thread From: J.A. Magallon @ 2004-10-07 22:42 UTC (permalink / raw) To: Dave Hansen; +Cc: Linux Kernel Mailing List On 2004.10.07, Dave Hansen wrote: > I just booted 2.6.9-rc3-mm3 and got the good ol' > > VFS: Cannot open root device "sda2" or unknown-block(0,0) > Please append a correct "root=" boot option > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(0,0) > > backing out bk-scsi.patch seems to fix it. I believe this worked in > 2.6.9-rc3-mm2. > Mine works: 03:0c.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02) werewolf:~> uname -a Linux werewolf.able.es 2.6.9-rc3-mm3 #1 SMP... -- J.A. Magallon <jamagallon()able!es> \ Software is like sex: werewolf!able!es \ It's better when it's free Mandrakelinux release 10.1 (Community) for i586 Linux 2.6.9-rc3-mm3 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #1 ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-07 22:42 ` J.A. Magallon @ 2004-10-08 3:57 ` K.R. Foley 2004-10-08 12:08 ` Luben Tuikov 0 siblings, 1 reply; 18+ messages in thread From: K.R. Foley @ 2004-10-08 3:57 UTC (permalink / raw) To: J.A. Magallon; +Cc: Dave Hansen, Linux Kernel Mailing List J.A. Magallon wrote: > > On 2004.10.07, Dave Hansen wrote: > >> I just booted 2.6.9-rc3-mm3 and got the good ol' >> VFS: Cannot open root device "sda2" or unknown-block(0,0) >> Please append a correct "root=" boot option >> Kernel panic - not syncing: VFS: Unable to mount root fs on >> unknown-block(0,0) >> >> backing out bk-scsi.patch seems to fix it. I believe this worked in >> 2.6.9-rc3-mm2. >> > > Mine works: > > 03:0c.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02) > > werewolf:~> uname -a > Linux werewolf.able.es 2.6.9-rc3-mm3 #1 SMP... Mine doesn't without backing out those patches :) See my other post about this. 04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) kr ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-08 3:57 ` K.R. Foley @ 2004-10-08 12:08 ` Luben Tuikov 2004-10-22 13:58 ` Ingo Molnar 0 siblings, 1 reply; 18+ messages in thread From: Luben Tuikov @ 2004-10-08 12:08 UTC (permalink / raw) To: K.R. Foley; +Cc: J.A. Magallon, Dave Hansen, Linux Kernel Mailing List K.R. Foley wrote: > J.A. Magallon wrote: > >> >> On 2004.10.07, Dave Hansen wrote: >> >>> I just booted 2.6.9-rc3-mm3 and got the good ol' >>> VFS: Cannot open root device "sda2" or unknown-block(0,0) >>> Please append a correct "root=" boot option >>> Kernel panic - not syncing: VFS: Unable to mount root fs on >>> unknown-block(0,0) >>> >>> backing out bk-scsi.patch seems to fix it. I believe this worked in >>> 2.6.9-rc3-mm2. >>> >> >> Mine works: >> >> 03:0c.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02) >> >> werewolf:~> uname -a >> Linux werewolf.able.es 2.6.9-rc3-mm3 #1 SMP... > > > Mine doesn't without backing out those patches :) See my other post > about this. > > 04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) > 04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) You can see you have different chips. It's the IDs. I'll come up with something shortly. Luben ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-08 12:08 ` Luben Tuikov @ 2004-10-22 13:58 ` Ingo Molnar 2004-10-22 14:02 ` Luben Tuikov 0 siblings, 1 reply; 18+ messages in thread From: Ingo Molnar @ 2004-10-22 13:58 UTC (permalink / raw) To: Luben Tuikov Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > >>>backing out bk-scsi.patch seems to fix it. I believe this worked in > >>>2.6.9-rc3-mm2. > >Mine doesn't without backing out those patches :) See my other post > >about this. > > > >04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) > >04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) > > You can see you have different chips. It's the IDs. > I'll come up with something shortly. Same adapter, same problem here: 03:04.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 03:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) any patch i could try (other than backing out the whole SCSI patch)? Ingo ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 13:58 ` Ingo Molnar @ 2004-10-22 14:02 ` Luben Tuikov 2004-10-22 14:07 ` Ingo Molnar 0 siblings, 1 reply; 18+ messages in thread From: Luben Tuikov @ 2004-10-22 14:02 UTC (permalink / raw) To: Ingo Molnar Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List Have you tried this with the latest scsi-misc-2.6 tree? The PCI table patches are there. If you have _and_ it still does not work, can you send output of "lspci -vn"? Thanks, Luben Ingo Molnar wrote: > * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > > >>>>>backing out bk-scsi.patch seems to fix it. I believe this worked in >>>>>2.6.9-rc3-mm2. > > >>>Mine doesn't without backing out those patches :) See my other post >>>about this. >>> >>>04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) >>>04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) >> >>You can see you have different chips. It's the IDs. >>I'll come up with something shortly. > > > Same adapter, same problem here: > > 03:04.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) > 03:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) > > any patch i could try (other than backing out the whole SCSI patch)? > > Ingo ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 14:02 ` Luben Tuikov @ 2004-10-22 14:07 ` Ingo Molnar 2004-10-22 14:40 ` Luben Tuikov 0 siblings, 1 reply; 18+ messages in thread From: Ingo Molnar @ 2004-10-22 14:07 UTC (permalink / raw) To: Luben Tuikov Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > Have you tried this with the latest scsi-misc-2.6 tree? The PCI table > patches are there. > > If you have _and_ it still does not work, can you send output of > "lspci -vn"? no, i havent. Is it easy to apply that tree to 2.6.9-rc4-mm1? Ingo ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 14:07 ` Ingo Molnar @ 2004-10-22 14:40 ` Luben Tuikov 2004-10-22 14:55 ` Ingo Molnar 0 siblings, 1 reply; 18+ messages in thread From: Luben Tuikov @ 2004-10-22 14:40 UTC (permalink / raw) To: Ingo Molnar Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List Ingo Molnar wrote: > * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > > >>Have you tried this with the latest scsi-misc-2.6 tree? The PCI table >>patches are there. >> >>If you have _and_ it still does not work, can you send output of >>"lspci -vn"? > > > no, i havent. Is it easy to apply that tree to 2.6.9-rc4-mm1? Yes, I think so. There's 2 patches there for the AIC drivers: the PCI tables and sleeping while holding a lock. Luben ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 14:40 ` Luben Tuikov @ 2004-10-22 14:55 ` Ingo Molnar 2004-10-22 15:04 ` Luben Tuikov 0 siblings, 1 reply; 18+ messages in thread From: Ingo Molnar @ 2004-10-22 14:55 UTC (permalink / raw) To: Luben Tuikov Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > >no, i havent. Is it easy to apply that tree to 2.6.9-rc4-mm1? > > Yes, I think so. There's 2 patches there for the AIC drivers: the PCI > tables and sleeping while holding a lock. linux-scsi.bkbits.net seems to be down - is there any alternate site for the patches? Ingo ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 14:55 ` Ingo Molnar @ 2004-10-22 15:04 ` Luben Tuikov 2004-10-22 17:36 ` K.R. Foley 0 siblings, 1 reply; 18+ messages in thread From: Luben Tuikov @ 2004-10-22 15:04 UTC (permalink / raw) To: Ingo Molnar Cc: K.R. Foley, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 492 bytes --] Ingo Molnar wrote: > * Luben Tuikov <luben_tuikov@adaptec.com> wrote: > > >>>no, i havent. Is it easy to apply that tree to 2.6.9-rc4-mm1? >> >>Yes, I think so. There's 2 patches there for the AIC drivers: the PCI >>tables and sleeping while holding a lock. > > > linux-scsi.bkbits.net seems to be down - is there any alternate site for > the patches? Yes. Attached to this email. (if I append them, a space gets added for some unknown reason) Let me know how it works out. Luben [-- Attachment #2: pci_id.patch --] [-- Type: application/octet-stream, Size: 16391 bytes --] # This is a BitKeeper generated diff -Nru style patch. # # ChangeSet # 2004/10/12 13:35:39-04:00 luben@lion.adaptec.com # Adding proper PCI ID tables to aic7xxx and aic79xx drivers. # # drivers/scsi/aic7xxx/aiclib.h # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +39 -0 # Adding macros for generating the elements of PCI ID tables. # # drivers/scsi/aic7xxx/aic7xxx_pci.h # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +45 -13 # Adding copyright and proper macro declarations. # # drivers/scsi/aic7xxx/aic7xxx_pci.c # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +13 -0 # No need of this static function in this header file. # # drivers/scsi/aic7xxx/aic7xxx_osm_pci.c # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +18 -15 # Adding proper PCI ID table. # # drivers/scsi/aic7xxx/aic79xx_pci.c # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +2 -24 # Moving ID definitions out of this file into their own. # # drivers/scsi/aic7xxx/aic79xx_osm_pci.c # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +25 -9 # Adding PCI ID table. # # drivers/scsi/aic7xxx/aic79xx_osm.h # 2004/10/12 13:35:25-04:00 luben@lion.adaptec.com +1 -0 # Cosmetic. # # drivers/scsi/aic7xxx/aic79xx_pci.h # 2004/10/12 11:09:00-04:00 luben@lion.adaptec.com +70 -0 # # drivers/scsi/aic7xxx/aic79xx_pci.h # 2004/10/12 11:08:59-04:00 luben@lion.adaptec.com +0 -0 # BitKeeper file /home/luben/projects/scsi-misc-2.6/drivers/scsi/aic7xxx/aic79xx_pci.h # # drivers/scsi/aic7xxx/aic79xx_pci.c # 2004/10/08 17:44:32-04:00 luben@lion.adaptec.com +0 -0 # *** empty log message *** # diff -Nru a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h --- a/drivers/scsi/aic7xxx/aic79xx_osm.h 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_osm.h 2004-10-12 13:37:14 -04:00 @@ -1143,4 +1143,5 @@ #endif #define bootverbose aic79xx_verbose extern uint32_t aic79xx_verbose; + #endif /* _AIC79XX_LINUX_H_ */ diff -Nru a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c --- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2004-10-12 13:37:14 -04:00 @@ -41,6 +41,7 @@ #include "aic79xx_osm.h" #include "aic79xx_inline.h" +#include "aic79xx_pci.h" static int ahd_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent); @@ -51,16 +52,31 @@ uint8_t **maddr); static void ahd_linux_pci_dev_remove(struct pci_dev *pdev); -/* We do our own ID filtering. So, grab all SCSI storage class devices. */ +/* Define the macro locally since it's different for different class of chips. + */ +#define ID(x) \ + ID2C(x), \ + ID2C(IDIROC(x)) + static struct pci_device_id ahd_linux_pci_id_table[] = { - { - 0x9005, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_SCSI << 8, 0xFFFF00, 0 - }, - { - 0x9005, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID << 8, 0xFFFF00, 0 - }, + /* aic7901 based controllers */ + ID(ID_AHA_29320A), + ID(ID_AHA_29320ALP), + /* aic7902 based controllers */ + ID(ID_AHA_29320), + ID(ID_AHA_29320B), + ID(ID_AHA_29320LP), + ID(ID_AHA_39320), + ID(ID_AHA_39320_B), + ID(ID_AHA_39320A), + ID(ID_AHA_39320D), + ID(ID_AHA_39320D_HP), + ID(ID_AHA_39320D_B), + ID(ID_AHA_39320D_B_HP), + /* Generic chip probes for devices we don't know exactly. */ + ID16(ID_AIC7901 & ID_9005_GENERIC_MASK), + ID(ID_AIC7901A & ID_DEV_VENDOR_MASK), + ID16(ID_AIC7902 & ID_9005_GENERIC_MASK), { 0 } }; diff -Nru a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c --- a/drivers/scsi/aic7xxx/aic79xx_pci.c 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c 2004-10-12 13:37:14 -04:00 @@ -51,6 +51,8 @@ #include <dev/aic7xxx/aic79xx_inline.h> #endif +#include "aic79xx_pci.h" + static __inline uint64_t ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) { @@ -64,30 +66,6 @@ return (id); } -#define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull -#define ID_ALL_IROC_MASK 0xFF7FFFFFFFFFFFFFull -#define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull -#define ID_9005_GENERIC_MASK 0xFFF0FFFF00000000ull -#define ID_9005_GENERIC_IROC_MASK 0xFF70FFFF00000000ull - -#define ID_AIC7901 0x800F9005FFFF9005ull -#define ID_AHA_29320A 0x8000900500609005ull -#define ID_AHA_29320ALP 0x8017900500449005ull - -#define ID_AIC7901A 0x801E9005FFFF9005ull -#define ID_AHA_29320 0x8012900500429005ull -#define ID_AHA_29320B 0x8013900500439005ull -#define ID_AHA_29320LP 0x8014900500449005ull - -#define ID_AIC7902 0x801F9005FFFF9005ull -#define ID_AIC7902_B 0x801D9005FFFF9005ull -#define ID_AHA_39320 0x8010900500409005ull -#define ID_AHA_39320_B 0x8015900500409005ull -#define ID_AHA_39320A 0x8016900500409005ull -#define ID_AHA_39320D 0x8011900500419005ull -#define ID_AHA_39320D_B 0x801C900500419005ull -#define ID_AHA_39320D_HP 0x8011900500AC0E11ull -#define ID_AHA_39320D_B_HP 0x801C900500AC0E11ull #define ID_AIC7902_PCI_REV_A4 0x3 #define ID_AIC7902_PCI_REV_B0 0x10 #define SUBID_HP 0x0E11 diff -Nru a/drivers/scsi/aic7xxx/aic79xx_pci.h b/drivers/scsi/aic7xxx/aic79xx_pci.h --- /dev/null Wed Dec 31 16:00:00 196900 +++ b/drivers/scsi/aic7xxx/aic79xx_pci.h 2004-10-12 13:37:14 -04:00 @@ -0,0 +1,70 @@ +/* + * Adaptec AIC79xx device driver for Linux. + * + * Copyright (c) 2000-2001 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id$ + * + */ +#ifndef _AIC79XX_PCI_H_ +#define _AIC79XX_PCI_H_ + +#define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull +#define ID_ALL_IROC_MASK 0xFF7FFFFFFFFFFFFFull +#define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull +#define ID_9005_GENERIC_MASK 0xFFF0FFFF00000000ull +#define ID_9005_GENERIC_IROC_MASK 0xFF70FFFF00000000ull + +#define ID_AIC7901 0x800F9005FFFF9005ull +#define ID_AHA_29320A 0x8000900500609005ull +#define ID_AHA_29320ALP 0x8017900500449005ull + +#define ID_AIC7901A 0x801E9005FFFF9005ull +#define ID_AHA_29320 0x8012900500429005ull +#define ID_AHA_29320B 0x8013900500439005ull +#define ID_AHA_29320LP 0x8014900500449005ull + +#define ID_AIC7902 0x801F9005FFFF9005ull +#define ID_AIC7902_B 0x801D9005FFFF9005ull +#define ID_AHA_39320 0x8010900500409005ull +#define ID_AHA_39320_B 0x8015900500409005ull +#define ID_AHA_39320A 0x8016900500409005ull +#define ID_AHA_39320D 0x8011900500419005ull +#define ID_AHA_39320D_B 0x801C900500419005ull +#define ID_AHA_39320D_HP 0x8011900500AC0E11ull +#define ID_AHA_39320D_B_HP 0x801C900500AC0E11ull + +#endif /* _AIC79XX_PCI_H_ */ diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2004-10-12 13:37:14 -04:00 @@ -58,29 +58,27 @@ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) static void ahc_linux_pci_dev_remove(struct pci_dev *pdev); +/* Define the macro locally since it's different for different class of chips. +*/ +#define ID(x) ID_C(x, PCI_CLASS_STORAGE_SCSI) + static struct pci_device_id ahc_linux_pci_id_table[] = { -#define LINUXID(x,s) (unsigned)((((x) >> s) & 0xffff) ?: PCI_ANY_ID) -#define ID(x) \ - { \ - LINUXID(x,32), LINUXID(x,48), LINUXID(x,0), LINUXID(x,16), \ - PCI_CLASS_STORAGE_SCSI << 8, 0xFFFF00, 0 \ - } -#define ID4(x,y) \ - ID(x | ((y+0)<<48)), ID(x | ((y+1)<<48)), ID(x | ((y+2)<<48)), \ - ID(x | ((y+3)<<48)) -#define ID16(x) ID4(x,0ULL), ID4(x,4ULL), ID4(x,8ULL), ID4(x,12ULL) + /* aic7850 based controllers */ ID(ID_AHA_2902_04_10_15_20C_30C), + /* aic7860 based controllers */ ID(ID_AHA_2930CU), ID(ID_AHA_1480A & ID_DEV_VENDOR_MASK), ID(ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK), ID(ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK), ID(ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK), + /* aic7870 based controllers */ ID(ID_AHA_2940), ID(ID_AHA_3940), ID(ID_AHA_398X), ID(ID_AHA_2944), ID(ID_AHA_3944), ID(ID_AHA_4944), + /* aic7880 based controllers */ ID(ID_AHA_2940U & ID_DEV_VENDOR_MASK), ID(ID_AHA_3940U & ID_DEV_VENDOR_MASK), ID(ID_AHA_2944U & ID_DEV_VENDOR_MASK), @@ -90,13 +88,15 @@ ID(ID_AHA_2930U & ID_DEV_VENDOR_MASK), ID(ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK), ID(ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK), + /* aic7890 based controllers */ ID(ID_AHA_2930U2), ID(ID_AHA_2940U2B), ID(ID_AHA_2940U2_OEM), ID(ID_AHA_2940U2), ID(ID_AHA_2950U2B), - ID(ID_AIC7890_ARO), + ID16(ID_AIC7890_ARO & ID_AIC7895_ARO_MASK), ID(ID_AAA_131U2), + /* aic7890 based controllers */ ID(ID_AHA_29160), ID(ID_AHA_29160_CPQ), ID(ID_AHA_29160N), @@ -104,6 +104,7 @@ ID(ID_AHA_29160B), ID(ID_AHA_19160B), ID(ID_AIC7892_ARO), + /* aic7892 based controllers */ ID(ID_AHA_2940U_DUAL), ID(ID_AHA_3940AU), ID(ID_AHA_3944AU), @@ -113,20 +114,22 @@ ID(ID_AHA_3950U2D_0), ID(ID_AHA_3950U2D_1), ID(ID_AIC7896_ARO), + /* aic7899 based controllers */ ID(ID_AHA_3960D), ID(ID_AHA_3960D_CPQ), ID(ID_AIC7899_ARO), + /* Generic chip probes for devices we don't know exactly. */ ID(ID_AIC7850 & ID_DEV_VENDOR_MASK), ID(ID_AIC7855 & ID_DEV_VENDOR_MASK), ID(ID_AIC7859 & ID_DEV_VENDOR_MASK), ID(ID_AIC7860 & ID_DEV_VENDOR_MASK), ID(ID_AIC7870 & ID_DEV_VENDOR_MASK), ID(ID_AIC7880 & ID_DEV_VENDOR_MASK), - ID16(ID_AIC7890), - ID16(ID_AIC7892), + ID16(ID_AIC7890 & ID_9005_GENERIC_MASK), + ID16(ID_AIC7892 & ID_9005_GENERIC_MASK), ID(ID_AIC7895 & ID_DEV_VENDOR_MASK), - ID(ID_AIC7896), - ID(ID_AIC7899), + ID16(ID_AIC7896 & ID_9005_GENERIC_MASK), + ID16(ID_AIC7899 & ID_9005_GENERIC_MASK), ID(ID_AIC7810 & ID_DEV_VENDOR_MASK), ID(ID_AIC7815 & ID_DEV_VENDOR_MASK), { 0 } diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c --- a/drivers/scsi/aic7xxx/aic7xxx_pci.c 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c 2004-10-12 13:37:14 -04:00 @@ -56,6 +56,19 @@ #include "aic7xxx_pci.h" +static __inline uint64_t +ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) +{ + uint64_t id; + + id = subvendor + | (subdevice << 16) + | ((uint64_t)vendor << 32) + | ((uint64_t)device << 48); + + return (id); +} + #define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */ #define AHC_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */ diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_pci.h b/drivers/scsi/aic7xxx/aic7xxx_pci.h --- a/drivers/scsi/aic7xxx/aic7xxx_pci.h 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_pci.h 2004-10-12 13:37:14 -04:00 @@ -1,16 +1,46 @@ - -static __inline uint64_t -ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) -{ - uint64_t id; - - id = subvendor - | (subdevice << 16) - | ((uint64_t)vendor << 32) - | ((uint64_t)device << 48); - - return (id); -} +/* + * Adaptec AIC7xxx device driver for Linux. + * + * Copyright (c) 2000-2001 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id$ + * + */ +#ifndef _AIC7XXX_PCI_H_ +#define _AIC7XXX_PCI_H_ #define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull #define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull @@ -90,3 +120,5 @@ #define ID_AIC7810 0x1078900400000000ull #define ID_AIC7815 0x7815900400000000ull + +#endif /* _AIC7XXX_PCI_H_ */ diff -Nru a/drivers/scsi/aic7xxx/aiclib.h b/drivers/scsi/aic7xxx/aiclib.h --- a/drivers/scsi/aic7xxx/aiclib.h 2004-10-12 13:37:14 -04:00 +++ b/drivers/scsi/aic7xxx/aiclib.h 2004-10-12 13:37:14 -04:00 @@ -1043,4 +1043,43 @@ return (rv); } +/* Macros for generating the elements of the PCI ID tables. */ + +#define GETID(v, s) (unsigned)(((v) >> (s)) & 0xFFFF ?: PCI_ANY_ID) + +#define ID_C(x, c) \ +{ \ + GETID(x,32), GETID(x,48), GETID(x,0), GETID(x,16), \ + (c) << 8, 0xFFFF00, 0 \ +} + +#define ID2C(x) \ + ID_C(x, PCI_CLASS_STORAGE_SCSI), \ + ID_C(x, PCI_CLASS_STORAGE_RAID) + +#define IDIROC(x) ((x) | ~ID_ALL_IROC_MASK) + +/* Generate IDs for all 16 possibilites. + * The argument has already masked out + * the 4 least significant bits of the device id. + * (e.g., mask: ID_9005_GENERIC_MASK). + */ +#define ID16(x) \ + ID(x), \ + ID((x) | 0x0001000000000000ull), \ + ID((x) | 0x0002000000000000ull), \ + ID((x) | 0x0003000000000000ull), \ + ID((x) | 0x0004000000000000ull), \ + ID((x) | 0x0005000000000000ull), \ + ID((x) | 0x0006000000000000ull), \ + ID((x) | 0x0007000000000000ull), \ + ID((x) | 0x0008000000000000ull), \ + ID((x) | 0x0009000000000000ull), \ + ID((x) | 0x000A000000000000ull), \ + ID((x) | 0x000B000000000000ull), \ + ID((x) | 0x000C000000000000ull), \ + ID((x) | 0x000D000000000000ull), \ + ID((x) | 0x000E000000000000ull), \ + ID((x) | 0x000F000000000000ull) + #endif /*_AICLIB_H */ [-- Attachment #3: sleep-fix.patch --] [-- Type: application/octet-stream, Size: 4484 bytes --] # This is a BitKeeper generated diff -Nru style patch. # # ChangeSet # 2004/10/13 15:55:49-04:00 luben@lion.adaptec.com # Fix sleeping while holding a lock on host removal and # on killing the DV thread. # # drivers/scsi/aic7xxx/aic7xxx_osm_pci.c # 2004/10/13 15:55:36-04:00 luben@lion.adaptec.com +4 -2 # Fix sleeping while holding a lock on host removal. # # drivers/scsi/aic7xxx/aic7xxx_osm.c # 2004/10/13 15:55:35-04:00 luben@lion.adaptec.com +0 -3 # Fix sleeping while holding a lock on killing the DV thread. # # drivers/scsi/aic7xxx/aic7xxx_core.c # 2004/10/13 15:55:35-04:00 luben@lion.adaptec.com +0 -1 # Fix sleeping while holding a lock on host removal. # # drivers/scsi/aic7xxx/aic79xx_osm_pci.c # 2004/10/13 15:55:35-04:00 luben@lion.adaptec.com +4 -2 # Fix sleeping while holding a lock on host removal. # # drivers/scsi/aic7xxx/aic79xx_osm.c # 2004/10/13 15:55:35-04:00 luben@lion.adaptec.com +1 -3 # Fix sleeping while holding a lock on killing the DV thread. # # drivers/scsi/aic7xxx/aic79xx_core.c # 2004/10/13 15:55:35-04:00 luben@lion.adaptec.com +0 -1 # Fix sleeping while holding a lock on host removal. # diff -Nru a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c --- a/drivers/scsi/aic7xxx/aic79xx_core.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_core.c 2004-10-13 15:58:23 -04:00 @@ -5270,7 +5270,6 @@ default: case 5: ahd_shutdown(ahd); - TAILQ_REMOVE(&ahd_tailq, ahd, links); /* FALLTHROUGH */ case 4: ahd_dmamap_unload(ahd, ahd->shared_data_dmat, diff -Nru a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c --- a/drivers/scsi/aic7xxx/aic79xx_osm.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c 2004-10-13 15:58:23 -04:00 @@ -5032,7 +5032,6 @@ ahd_linux_exit(void) { struct ahd_softc *ahd; - u_long l; /* * Shutdown DV threads before going into the SCSI mid-layer. @@ -5040,12 +5039,11 @@ * kernel so that waiting for our DV threads to exit leads * to deadlock. */ - ahd_list_lock(&l); TAILQ_FOREACH(ahd, &ahd_tailq, links) { ahd_linux_kill_dv_thread(ahd); } - ahd_list_unlock(&l); + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) /* * In 2.4 we have to unregister from the PCI core _after_ diff -Nru a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c --- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2004-10-13 15:58:23 -04:00 @@ -105,12 +105,14 @@ if (ahd != NULL) { u_long s; + TAILQ_REMOVE(&ahd_tailq, ahd, links); + ahd_list_unlock(&l); ahd_lock(ahd, &s); ahd_intr_enable(ahd, FALSE); ahd_unlock(ahd, &s); ahd_free(ahd); - } - ahd_list_unlock(&l); + } else + ahd_list_unlock(&l); } static int diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c --- a/drivers/scsi/aic7xxx/aic7xxx_core.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c 2004-10-13 15:58:23 -04:00 @@ -3973,7 +3973,6 @@ default: case 5: ahc_shutdown(ahc); - TAILQ_REMOVE(&ahc_tailq, ahc, links); /* FALLTHROUGH */ case 4: ahc_dmamap_unload(ahc, ahc->shared_data_dmat, diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c 2004-10-13 15:58:23 -04:00 @@ -5033,7 +5033,6 @@ ahc_linux_exit(void) { struct ahc_softc *ahc; - u_long l; /* * Shutdown DV threads before going into the SCSI mid-layer. @@ -5041,12 +5040,10 @@ * kernel so that waiting for our DV threads to exit leads * to deadlock. */ - ahc_list_lock(&l); TAILQ_FOREACH(ahc, &ahc_tailq, links) { ahc_linux_kill_dv_thread(ahc); } - ahc_list_unlock(&l); #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) /* diff -Nru a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2004-10-13 15:58:23 -04:00 +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2004-10-13 15:58:23 -04:00 @@ -160,12 +160,14 @@ if (ahc != NULL) { u_long s; + TAILQ_REMOVE(&ahc_tailq, ahc, links); + ahc_list_unlock(&l); ahc_lock(ahc, &s); ahc_intr_enable(ahc, FALSE); ahc_unlock(ahc, &s); ahc_free(ahc); - } - ahc_list_unlock(&l); + } else + ahc_list_unlock(&l); } #endif /* !LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) */ ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: 2.6.9-rc3-mm3 fails to detect aic7xxx 2004-10-22 15:04 ` Luben Tuikov @ 2004-10-22 17:36 ` K.R. Foley 0 siblings, 0 replies; 18+ messages in thread From: K.R. Foley @ 2004-10-22 17:36 UTC (permalink / raw) To: Luben Tuikov Cc: Ingo Molnar, J.A. Magallon, Dave Hansen, Linux Kernel Mailing List Luben Tuikov wrote: > Ingo Molnar wrote: > >> * Luben Tuikov <luben_tuikov@adaptec.com> wrote: >> >> >>>> no, i havent. Is it easy to apply that tree to 2.6.9-rc4-mm1? >>> >>> >>> Yes, I think so. There's 2 patches there for the AIC drivers: the PCI >>> tables and sleeping while holding a lock. >> >> >> >> linux-scsi.bkbits.net seems to be down - is there any alternate site >> for the patches? > > > Yes. Attached to this email. (if I append them, a space gets > added for some unknown reason) > > Let me know how it works out. > > Luben This works fine for me. thanks, kr ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2004-10-22 17:37 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-10-07 19:40 2.6.9-rc3-mm3 fails to detect aic7xxx Dave Hansen 2004-10-07 20:13 ` K.R. Foley 2004-10-07 20:38 ` Luben Tuikov 2004-10-07 20:45 ` Dave Hansen 2004-10-08 3:53 ` K.R. Foley 2004-10-07 20:39 ` Andrew Morton 2004-10-07 20:41 ` Dave Hansen 2004-10-07 20:49 ` K.R. Foley 2004-10-07 22:42 ` J.A. Magallon 2004-10-08 3:57 ` K.R. Foley 2004-10-08 12:08 ` Luben Tuikov 2004-10-22 13:58 ` Ingo Molnar 2004-10-22 14:02 ` Luben Tuikov 2004-10-22 14:07 ` Ingo Molnar 2004-10-22 14:40 ` Luben Tuikov 2004-10-22 14:55 ` Ingo Molnar 2004-10-22 15:04 ` Luben Tuikov 2004-10-22 17:36 ` K.R. Foley
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).