From: "Harald Dunkel" <harald.dunkel@t-online.de>
To: linux-kernel@vger.kernel.org
Cc: Vojtech Pavlik <vojtech@suse.cz>
Subject: Re: 2.6.7, amd64: PS/2 Mouse detection doesn't work
Date: Wed, 20 Oct 2004 14:57:18 +0200 [thread overview]
Message-ID: <417660AE.4060408@t-online.de> (raw)
In-Reply-To: <20040711084208.GA1322@ucw.cz>
[-- Attachment #1: Type: text/plain, Size: 79 bytes --]
Hi folks,
Attached you can find an updated patch for 2.6.9.
Regards
Harri
[-- Attachment #2: psmouse-usb-fix-3.new --]
[-- Type: text/plain, Size: 2382 bytes --]
--- /tmp/linux-2.6.9/drivers/pci/quirks.c 2004-10-18 23:53:06.000000000 +0200
+++ linux-2.6.9/drivers/pci/quirks.c 2004-10-20 14:21:02.000000000 +0200
@@ -826,6 +826,69 @@
pci_read_config_byte(dev, 0x77, &val);
}
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+#define UHCI_USBCMD_GRESET 0x0004 /* Global reset */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRENABLE 0x10
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+#if defined(__i386__) || defined(__x86_64__)
+static void __init quirk_usb_disable_smm_bios(struct pci_dev *pdev)
+{
+
+ if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
+ int i;
+ unsigned long base = 0;;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (!base)
+ return;
+
+ outw(0, base + UHCI_USBINTR);
+ outw(UHCI_USBCMD_GRESET, base + UHCI_USBCMD);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ*50+999) / 1000);
+ outw(0, base + UHCI_USBCMD);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ*10+999) / 1000);
+
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+ }
+
+ if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
+ char *base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ int temp = 500; /* arbitrary: five seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (temp && readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ temp--;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout( HZ / 100);
+ }
+ }
+ iounmap(base);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_disable_smm_bios );
+#endif
+
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
next prev parent reply other threads:[~2004-10-20 13:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-11 7:00 2.6.7, amd64: PS/2 Mouse detection doesn't work Harald Dunkel
2004-07-11 8:42 ` Vojtech Pavlik
2004-07-11 13:16 ` Harald Dunkel
2004-07-18 10:22 ` Harald Dunkel
2004-08-04 10:52 ` Harald Dunkel
2004-10-20 12:57 ` Harald Dunkel [this message]
2004-10-20 19:40 ` Alan Cox
2004-10-21 8:11 ` Harald Dunkel
2004-10-21 9:44 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=417660AE.4060408@t-online.de \
--to=harald.dunkel@t-online.de \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox