* 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
@ 2004-10-23 15:51 Matthijs Melchior
2004-10-25 6:18 ` Jeff Garzik
2004-10-30 23:29 ` [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections Matthijs Melchior
0 siblings, 2 replies; 5+ messages in thread
From: Matthijs Melchior @ 2004-10-23 15:51 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1609 bytes --]
Hi,
Linux running on my new Dell-8400 computer does not recognize
the SATA disks [No problem with the PATA drives].
The attached log is output from 'dmesg' with '/proc/modules'
and 'ps -Hel' appended.
This machine has 4 disks, configured in the Intel Raid configuration
BIOS as 3 devices, with disks on ports 0 & 2 being a raid1 pair,
half of disks 1 & 3 also a raid1 device and the rest a raid0 device.
The raid signatures on disk 3 have been removed [for testing].
Ths "SATA Operation" setting in BIOS is set to "RAID Autodetect / AHCI".
I have set symbols ATA_DEBUG and ATA_VERBOSE_DEBUG to 1 for more output
and built a new set of modules.
I have configured netbooting [PXE] for this machine and I can boot
the kernel with an initrd. The only thing it currently does is loading
usb modules for console, usb keyboard, network and starting a shell.
Giving the command "modprobe ahci" hangs the machine.
Using "modprobe ahci &" instead and investigating the state at that
time leads me to suspect ata_dev_identify() waits for an interrupt that
is not occuring.
The attached '/proc/modules' and 'ps -Hel' are from this environment.
Please, can someone help me debugging this further, what other info
would be usefull, are there other experiments that can provide new
insights into this problem.....
--
Regards,
---------------------------------------------------------------- -o)
Matthijs Melchior Maarssen /\\
mmelchior@xs4all.nl Netherlands _\_v
---------------------------------------------------------------- ----
[-- Attachment #2: dmesg-8400 --]
[-- Type: text/plain, Size: 18194 bytes --]
Linux version 2.6.10-rc1 (mmelchio@p2pc) (gcc version 3.2.2) #1 SMP Sat Oct 23 06:23:17 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 261772
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32396 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000febf0
ACPI: RSDT (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fccbc
ACPI: FADT (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fccf8
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc9180
ACPI: MADT (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fcd6c
ACPI: BOOT (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fcdde
ACPI: MCFG (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fce06
ACPI: HPET (v001 DELL 8400 0x00000007 ASL 0x00000061) @ 0x000fce44
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ramdisk_size=16384 initrd=initrd root=/dev/ram0 vga=031B BOOT_IMAGE=linux
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029368k/1047088k available (1683k kernel code, 17116k reserved, 689k data, 188k init, 129584k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xf8800000, IRQs 2, 8, 0
hpet0: 0ns tick, 3 64-bit timers
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2992.818 MHz processor.
Using hpet for high-res timesource
Calibrating delay loop... 5931.00 BogoMIPS (lpj=2965504)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
per-CPU timeslice cutoff: 2925.83 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Total of 2 processors activated (11911.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0:
domain 0: span 03
groups: 01 02
domain 1: span 03
groups: 03
CPU1:
domain 0: span 03
groups: 02 01
domain 1: span 03
groups: 03
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4984k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb768, last bus=4
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
pnp: 00:00: ioport range 0x800-0x8df could not be reserved
pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7680k, total 16384k
vesafb: mode is 1280x1024x24, linelength=3840, pages=3
vesafb: protected mode interface info at c000:5890
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_acpi_add: no address or irqs in _CRS
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
VBTN PCI0 PCI1 PCI2 PCI3 PCI4 KBD USB0 USB1 USB2 USB3
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4984KiB [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdone.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 188k freed
Console: switching to colour frame buffer device 160x64
NET: Registered protocol family 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.0: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 185, io base 0xff80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.1: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 193, io base 0xff60
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.2: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 201, io base 0xff40
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 209
uhci_hcd 0000:00:1d.3: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 209, io base 0xff20
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
tg3.c:v3.11 (October 20, 2004)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:11:31:bd:1f
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
usb 4-1: new full speed USB device using address 2
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 4-1.2: new low speed USB device using address 3
input: Logitech USB Receiver on usb-0000:00:1d.3-1.2
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
# modprobe ahci &
SCSI subsystem initialized
libata version 1.02 loaded.
ahci_init_one: ENTER
ahci version 0.11
ACPI: PCI interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217
ahci_host_init: cap 0xc6107f03 port_map 0xf n_ports 4
ahci_host_init: mmio f8848c00 port_mmio f8848d00
ahci_setup_port: ENTER, base==0xf8848c00, port_idx 0
ahci_setup_port: base now==0xf8848d00
ahci_setup_port: EXIT
ahci_host_init: PORT_CMD 0x6
ahci_host_init: PORT_SCR_ERR 0x4050000
ahci_host_init: PORT_IRQ_STAT 0x0
ahci_host_init: mmio f8848c00 port_mmio f8848d80
ahci_setup_port: ENTER, base==0xf8848c00, port_idx 1
ahci_setup_port: base now==0xf8848d80
ahci_setup_port: EXIT
ahci_host_init: PORT_CMD 0x6
ahci_host_init: PORT_SCR_ERR 0x4050000
ahci_host_init: PORT_IRQ_STAT 0x0
ahci_host_init: mmio f8848c00 port_mmio f8848e00
ahci_setup_port: ENTER, base==0xf8848c00, port_idx 2
ahci_setup_port: base now==0xf8848e00
ahci_setup_port: EXIT
ahci_host_init: PORT_CMD 0x6
ahci_host_init: PORT_SCR_ERR 0x4050000
ahci_host_init: PORT_IRQ_STAT 0x0
ahci_host_init: mmio f8848c00 port_mmio f8848e80
ahci_setup_port: ENTER, base==0xf8848c00, port_idx 3
ahci_setup_port: base now==0xf8848e80
ahci_setup_port: EXIT
ahci_host_init: PORT_CMD 0x6
ahci_host_init: PORT_SCR_ERR 0x4050000
ahci_host_init: PORT_IRQ_STAT 0x0
ahci_host_init: HOST_CTL 0x80000000
ahci_host_init: HOST_CTL 0x80000002
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl
ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part
ata_device_add: ENTER
ata_host_add: ENTER
ata_port_start: prd alloc, virt f7d3d000, dma 37d3d000
ata1: SATA max UDMA/133 cmd 0xF8848D00 ctl 0x0 bmdma 0x0 irq 217
ata_host_add: ENTER
ata_port_start: prd alloc, virt f7e17000, dma 37e17000
ata2: SATA max UDMA/133 cmd 0xF8848D80 ctl 0x0 bmdma 0x0 irq 217
ata_host_add: ENTER
ata_port_start: prd alloc, virt f7d51000, dma 37d51000
ata3: SATA max UDMA/133 cmd 0xF8848E00 ctl 0x0 bmdma 0x0 irq 217
ata_host_add: ENTER
ata_port_start: prd alloc, virt c197b000, dma 197b000
ata4: SATA max UDMA/133 cmd 0xF8848E80 ctl 0x0 bmdma 0x0 irq 217
ata_device_add: probe begin
ata_device_add: ata1: probe begin
ahci_interrupt: ENTER
ahci_interrupt: port 0
ahci_interrupt: port 1
ahci_interrupt: port 2
ahci_interrupt: port 3
ahci_interrupt: EXIT
ahci_interrupt: ENTER
ahci_interrupt: port 0
ahci_interrupt: port 1
ahci_interrupt: port 2
ahci_interrupt: port 3
ahci_interrupt: EXIT
ata_dev_classify: found ATA device by sig
ata_dev_identify: ENTER, host 1, dev 0
ata_dev_select: ENTER, ata1: device 0, wait 1
ata_dev_identify: do ATA identify
ata_sg_setup_one: mapped buffer of 512 bytes for read
ahci_fill_sg: ENTER
# cat /proc/modules
ahci 12181 1 - Loading 0xf8820000
libata 53732 1 ahci, Live 0xf9031000
scsi_mod 131580 2 ahci,libata, Live 0xf905a000
tg3 87808 0 - Live 0xf8860000
uhci_hcd 34856 0 - Live 0xf8828000
usbkbd 7456 0 - Live 0xf881a000
usbcore 121352 3 uhci_hcd,usbkbd, Live 0xf9001000
unix 29260 0 - Live 0xf883e000
fbcon 38496 65 - Live 0xf8833000
font 8352 1 fbcon, Live 0xf8824000
bitblit 5792 1 fbcon, Live 0xf881d000
# ps -Hel
F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD
4 S 0 1 0 0 76 0 - 389 wait ? 00:00:00 init
1 S 0 2 1 0 -40 0 - 0 migrat ? 00:00:00 migration/0
1 S 0 3 1 0 94 19 - 0 ksofti ? 00:00:00 ksoftirqd/0
1 S 0 4 1 0 -40 0 - 0 migrat ? 00:00:00 migration/1
1 S 0 5 1 0 94 19 - 0 ksofti ? 00:00:00 ksoftirqd/1
1 S 0 6 1 0 66 -10 - 0 worker ? 00:00:00 events/0
1 S 0 8 6 0 67 -10 - 0 worker ? 00:00:00 khelper
1 S 0 53 6 0 66 -10 - 0 worker ? 00:00:00 kblockd/1
1 S 0 64 6 0 75 0 - 0 pdflus ? 00:00:00 pdflush
1 S 0 67 6 0 66 -10 - 0 worker ? 00:00:00 aio/1
1 S 0 761 6 0 66 -10 - 0 worker ? 00:00:00 ata/0
1 S 0 762 6 0 66 -10 - 0 worker ? 00:00:00 ata/1
1 S 0 7 1 0 65 -10 - 0 worker ? 00:00:00 events/1
1 S 0 9 7 0 69 -10 - 0 worker ? 00:00:00 kacpid
1 S 0 52 7 0 66 -10 - 0 worker ? 00:00:00 kblockd/0
1 S 0 63 7 0 80 0 - 0 pdflus ? 00:00:00 pdflush
1 S 0 66 7 0 66 -10 - 0 worker ? 00:00:00 aio/0
1 S 0 65 1 0 77 0 - 0 kswapd ? 00:00:00 kswapd0
1 S 0 653 1 0 81 0 - 0 serio_ ? 00:00:00 kseriod
1 S 0 724 1 0 75 0 - 0 - ? 00:00:00 kirqd
1 S 0 733 1 0 75 0 - 0 hub_th ? 00:00:00 khubd
4 S 0 753 1 0 76 0 - 391 wait ? 00:00:00 sh
4 D 0 760 753 0 78 0 - 379 ata_de ? 00:00:00 modprobe
0 R 0 773 753 0 77 0 - 573 - ? 00:00:00 ps
1 S 0 763 1 0 79 0 - 0 415898 ? 00:00:00 scsi_eh_0
1 S 0 764 1 0 80 0 - 0 415899 ? 00:00:00 scsi_eh_1
1 S 0 765 1 0 81 0 - 0 415907 ? 00:00:00 scsi_eh_2
1 S 0 766 1 0 82 0 - 0 415907 ? 00:00:00 scsi_eh_3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
2004-10-23 15:51 2.6.10-rc1 & ahci & IHC6R & 925X & raid1 Matthijs Melchior
@ 2004-10-25 6:18 ` Jeff Garzik
2004-10-30 23:29 ` [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections Matthijs Melchior
1 sibling, 0 replies; 5+ messages in thread
From: Jeff Garzik @ 2004-10-25 6:18 UTC (permalink / raw)
To: Matthijs Melchior; +Cc: linux-kernel, linux-ide@vger.kernel.org
Known AHCI problem, I'm working on the solution right now...
Jeff
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections
2004-10-23 15:51 2.6.10-rc1 & ahci & IHC6R & 925X & raid1 Matthijs Melchior
2004-10-25 6:18 ` Jeff Garzik
@ 2004-10-30 23:29 ` Matthijs Melchior
2004-10-30 23:41 ` Jeff Garzik
2004-10-30 23:42 ` Jeff Garzik
1 sibling, 2 replies; 5+ messages in thread
From: Matthijs Melchior @ 2004-10-30 23:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Jeff Garzik
[-- Attachment #1: Type: text/plain, Size: 431 bytes --]
This patch makes the following changes to drivers/scsi/ahci.c
- Add definition for SActive register
- Add most interrupt sources to default interrupt mask
- Write low 32 bits of FIS address to PxFB, where they belong
- Set command active bit in PxSACT before setting command issue bit in PxCI
- Announce Sub Class Code in driver info message [IDE, SATA or RAID]
--
Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl>
[-- Attachment #2: ahci-patch --]
[-- Type: text/plain, Size: 2761 bytes --]
--- a/drivers/scsi/ahci.c 2004-10-23 01:37:22.000000000 +0200
+++ b/drivers/scsi/ahci.c 2004-10-31 00:20:13.000000000 +0200
@@ -90,6 +90,7 @@
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
@@ -116,6 +117,9 @@
PORT_IRQ_HBUS_DATA_ERR |
PORT_IRQ_IF_ERR,
DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
+ PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE |
+ PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS |
+ PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS |
PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */
@@ -329,8 +333,8 @@
if (hpriv->cap & HOST_CAP_64)
writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
- writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
- readl(port_mmio + PORT_LST_ADDR); /* flush */
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+ readl(port_mmio + PORT_FIS_ADDR); /* flush */
writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
@@ -673,10 +677,13 @@
static int ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- void *mmio = (void *) ap->ioaddr.cmd_addr;
+ void *port_mmio = (void *) ap->ioaddr.cmd_addr;
- writel(1, mmio + PORT_CMD_ISSUE);
- readl(mmio + PORT_CMD_ISSUE); /* flush */
+ writel(1, port_mmio + PORT_SCR_ACT);
+ readl(port_mmio + PORT_SCR_ACT); /* flush */
+
+ writel(1, port_mmio + PORT_CMD_ISSUE);
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
return 0;
}
@@ -859,6 +866,8 @@
void *mmio = probe_ent->mmio_base;
u32 vers, cap, impl, speed;
const char *speed_s;
+ u16 cc;
+ const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = hpriv->cap;
@@ -872,8 +881,18 @@
else
speed_s = "?";
+ pci_read_config_word(pdev, 0x0a, &cc);
+ if (cc == 0x0101)
+ scc_s = "IDE";
+ else if (cc == 0x0106)
+ scc_s = "SATA";
+ else if (cc == 0x0104)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
- "%u slots %u ports %s Gbps 0x%x impl\n"
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
,
pci_name(pdev),
@@ -885,7 +904,8 @@
((cap >> 8) & 0x1f) + 1,
(cap & 0x1f) + 1,
speed_s,
- impl);
+ impl,
+ scc_s);
printk(KERN_INFO DRV_NAME "(%s) flags: "
"%s%s%s%s%s%s"
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections
2004-10-30 23:29 ` [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections Matthijs Melchior
@ 2004-10-30 23:41 ` Jeff Garzik
2004-10-30 23:42 ` Jeff Garzik
1 sibling, 0 replies; 5+ messages in thread
From: Jeff Garzik @ 2004-10-30 23:41 UTC (permalink / raw)
To: Matthijs Melchior; +Cc: linux-kernel
Matthijs Melchior wrote:
> This patch makes the following changes to drivers/scsi/ahci.c
>
> - Add definition for SActive register
> - Add most interrupt sources to default interrupt mask
> - Write low 32 bits of FIS address to PxFB, where they belong
> - Set command active bit in PxSACT before setting command issue bit in PxCI
> - Announce Sub Class Code in driver info message [IDE, SATA or RAID]
heh, cool... you found the stupid AHCI bug that I have been searching
for for over a week :)
Patch looks good, will test...
Jeff
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections
2004-10-30 23:29 ` [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections Matthijs Melchior
2004-10-30 23:41 ` Jeff Garzik
@ 2004-10-30 23:42 ` Jeff Garzik
1 sibling, 0 replies; 5+ messages in thread
From: Jeff Garzik @ 2004-10-30 23:42 UTC (permalink / raw)
To: Matthijs Melchior; +Cc: linux-kernel
Matthijs Melchior wrote:
> This patch makes the following changes to drivers/scsi/ahci.c
>
> - Add definition for SActive register
> - Add most interrupt sources to default interrupt mask
> - Write low 32 bits of FIS address to PxFB, where they belong
> - Set command active bit in PxSACT before setting command issue bit in PxCI
> - Announce Sub Class Code in driver info message [IDE, SATA or RAID]
>
>
> ------------------------------------------------------------------------
>
> --- a/drivers/scsi/ahci.c 2004-10-23 01:37:22.000000000 +0200
> +++ b/drivers/scsi/ahci.c 2004-10-31 00:20:13.000000000 +0200
> @@ -90,6 +90,7 @@
> PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
> PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
> PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
> + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
>
> /* PORT_IRQ_{STAT,MASK} bits */
> PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
> @@ -116,6 +117,9 @@
> PORT_IRQ_HBUS_DATA_ERR |
> PORT_IRQ_IF_ERR,
> DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
> + PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE |
> + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS |
> + PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS |
> PORT_IRQ_D2H_REG_FIS,
>
oh BTW, several parts of your patch had all the tabs converted to spaces
for some reason. I hand-converted them back.
Jeff
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-10-30 23:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-23 15:51 2.6.10-rc1 & ahci & IHC6R & 925X & raid1 Matthijs Melchior
2004-10-25 6:18 ` Jeff Garzik
2004-10-30 23:29 ` [PATCH 2.6.10-rc1] ahci: Intel ICH6R (925X) corrections Matthijs Melchior
2004-10-30 23:41 ` Jeff Garzik
2004-10-30 23:42 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).