From: "Froggy / Froggy Corp." <froggy@froggycorp.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RAID1 Software and SII3114 trouble
Date: Fri, 24 Dec 2004 18:35:04 +0100 [thread overview]
Message-ID: <41CC5348.BE6C1B1@froggycorp.com> (raw)
Hi,
I install a debian with kernel 2.6.9 and two HD using raid 1 software.
All partition are under raid software.
I getting trouble when i reboot the linux with error of read/write :
ata4: command 0x35 timeout, stat 0xd8 host_stat 0x1
ata4: status=0xd8 { Busy }
SCSI error : <4 0 0 0> return code = 0x8000002
Current sdb: sense 70 10
Raw sens data :0x70 0x00 0x10 0X00 0X00 0X00 0X00 0X0a 0X00 0X00 0X00
0X00 0X00 0X00 0X00 0X00 0X00 0X00
end_request: I/O error, dev sdb, sector 226864909
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
The server will not freeze, but no disk access can be made.
I scan sdb with mkfs to search bad sector but find nothing. I dont get
any message when i am under degraded array and i think that if a HD have
some problem, dmadm will put it under fault.
My configuration is a Tyan i7210 with SII3114 SATA RAID Chipset and the
two HD are both Seage SATA 120Go.
Thx in advance for support,
Regards,
next reply other threads:[~2004-12-24 17:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-24 17:35 Froggy / Froggy Corp. [this message]
2004-12-24 17:52 ` RAID1 Software and SII3114 trouble (second part) Froggy / Froggy Corp.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41CC5348.BE6C1B1@froggycorp.com \
--to=froggy@froggycorp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox