Problems with 2.6.10

Problems with 2.6.10

[Fryderyk Mazurek]

Hi everyone!

I have so strange problem with kernel 2.6.10. Kernel works good, but
problem starts when I do reboot. On boot screen my bios can't detect
my disk. Bios stops and nothing. So without end. Button reset on my
towel can't fix it. To fix this situation I must turn off and turn
on my computer. Only it helps. With kernel 2.6.9 wasn't so problem.
How to fix it?

I send my /proc/cpuinfo (all these informations from kernel 2.6.9):
-------------------------
processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 5
model		: 8
model name	: AMD-K6(tm) 3D processor
stepping	: 12
cpu MHz		: 451.145
cache size	: 64 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips	: 886.78
-------------------------

/proc/iomem
-------------------------
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03feffff : System RAM
  00100000-0035096c : Kernel code
  0035096d-004426ff : Kernel data
03ff0000-03ff07ff : ACPI Non-volatile Storage
03ff0800-03ffffff : ACPI Tables
e0000000-e3ffffff : 0000:00:00.0
e4000000-e5ffffff : PCI Bus #01
  e5000000-e5000fff : 0000:01:00.0
e6000000-e6ffffff : PCI Bus #01
  e6000000-e6ffffff : 0000:01:00.0
e7000000-e70000ff : 0000:00:09.0
ffff0000-ffffffff : reserved
-------------------------

/proc/ioports:
-------------------------
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : ISAPnP
0300-0301 : MPU401 UART
0376-0376 : ide1
0388-0389 : OPL2/3 (left)
038a-038b : OPL2/3 (right)
03c0-03df : vga+
03f6-03f6 : ide0
0500-050f : AD1816A
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
6000-60ff : 0000:00:07.3
  6000-6003 : PM1a_EVT_BLK
  6004-6005 : PM1a_CNT_BLK
  6008-600b : PM_TMR
  6020-6023 : GPE0_BLK
c000-cfff : PCI Bus #01
  c000-c0ff : 0000:01:00.0
e000-e01f : 0000:00:07.2
  e000-e01f : uhci_hcd
e400-e40f : 0000:00:07.1
  e400-e407 : ide0
  e408-e40f : ide1
-------------------------

Command lspci -vvv:
-------------------------
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3]
(rev 04)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
	Latency: 16
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e4000000-e5ffffff
	Prefetchable memory behind bridge: e6000000-e6ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
[Apollo VP] (rev 41)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev
06) (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at e400 [size=16]

00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 02) (prog-if
00 [UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at e000 [size=32]

00:07.3 PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
(prog-if 00 [Normal decode])
	!!! Invalid class 0604 for header type 00
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:09.0 Communication controller: Analog Devices SM56 PCI modem
	Subsystem: Analog Devices SM56 PCI modem
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
	Latency: 64 (250ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at e7000000 (32-bit, prefetchable) [size=256]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
AGP (rev 3a) (prog-if 00 [VGA])
	Subsystem: ATI Technologies Inc: Unknown device 0088
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min), cache line size 08
	Region 0: Memory at e6000000 (32-bit, prefetchable) [size=16M]
	Region 1: I/O ports at c000 [size=256]
	Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-------------------------

And at the end a part from log file (kernel 2.6.10):
-------------------------
Dec 27 17:13:15 frycek kernel: Linux version 2.6.10
(root@frycek.com.pl) (gcc version 3.4.3 (Mandrakelinux 10.2
3.4.3-1mdk)) #2 Mon Dec 27 16:56:31 CET 2004
Dec 27 17:13:15 frycek kernel: BIOS-provided physical RAM map:
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 0000000000100000 -
0000000003ff0000 (usable)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 0000000003ff0000 -
0000000003ff0800 (ACPI NVS)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 0000000003ff0800 -
0000000004000000 (ACPI data)
Dec 27 17:13:15 frycek kernel:  BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Dec 27 17:13:15 frycek kernel: 63MB LOWMEM available.
Dec 27 17:13:15 frycek kernel: On node 0 totalpages: 16368
Dec 27 17:13:15 frycek kernel:   DMA zone: 4096 pages, LIFO batch:1
Dec 27 17:13:15 frycek kernel:   Normal zone: 12272 pages, LIFO batch:2
Dec 27 17:13:15 frycek kernel:   HighMem zone: 0 pages, LIFO batch:1
Dec 27 17:13:15 frycek kernel: DMI 2.1 present.
Dec 27 17:13:15 frycek kernel: Built 1 zonelists
Dec 27 17:13:15 frycek kernel: Kernel command line:
BOOT_IMAGE=Linux-2.6.10 ro root=341
Dec 27 17:13:15 frycek kernel: No local APIC present or hardware
disabled
Dec 27 17:13:15 frycek kernel: mapped APIC to ffffd000 (01081000)
Dec 27 17:13:15 frycek kernel: Initializing CPU#0
Dec 27 17:13:15 frycek kernel: PID hash table entries: 256 (order:
8, 4096 bytes)
Dec 27 17:13:15 frycek kernel: Detected 451.131 MHz processor.
Dec 27 17:13:15 frycek kernel: Using tsc for high-res timesource
Dec 27 17:13:15 frycek kernel: Console: colour VGA+ 80x25
Dec 27 17:13:15 frycek kernel: Dentry cache hash table entries:
16384 (order: 4, 65536 bytes)
Dec 27 17:13:15 frycek kernel: Inode-cache hash table entries: 8192
(order: 3, 32768 bytes)
Dec 27 17:13:15 frycek kernel: Memory: 60956k/65472k available
(2217k kernel code, 4060k reserved, 872k data, 156k init, 0k highmem)
Dec 27 17:13:15 frycek kernel: Checking if this processor honours
the WP bit even in supervisor mode... Ok.
Dec 27 17:13:15 frycek kernel: Calibrating delay loop... 888.83
BogoMIPS (lpj=444416)
Dec 27 17:13:15 frycek kernel: Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
Dec 27 17:13:15 frycek kernel: CPU: After generic identify, caps:
008021bf 808029bf 00000000 00000000
Dec 27 17:13:15 frycek kernel: CPU: After vendor identify, caps: 
008021bf 808029bf 00000000 00000000
Dec 27 17:13:15 frycek kernel: CPU: L1 I Cache: 32K (32 bytes/line),
D cache 32K (32 bytes/line)
Dec 27 17:13:15 frycek kernel: CPU: After all inits, caps:       
008021bf 808029bf 00000000 00000002
Dec 27 17:13:15 frycek kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
Dec 27 17:13:15 frycek kernel: Checking 'hlt' instruction... OK.
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 16
Dec 27 17:13:15 frycek kernel: PCI: PCI BIOS revision 2.10 entry at
0xfb360, last bus=2
Dec 27 17:13:15 frycek kernel: PCI: Using configuration type 1
Dec 27 17:13:15 frycek kernel: mtrr: v2.0 (20020519)
Dec 27 17:13:15 frycek kernel: Linux Plug and Play Support v0.97 (c)
Adam Belay
Dec 27 17:13:15 frycek kernel: PnPBIOS: Scanning system for PnP BIOS
support...
Dec 27 17:13:15 frycek kernel: PnPBIOS: Found PnP BIOS installation
structure at 0xc00fbf90
Dec 27 17:13:15 frycek kernel: PnPBIOS: PnP BIOS version 1.0, entry
0xf0000:0xbfb8, dseg 0xf0000
Dec 27 17:13:15 frycek kernel: PnPBIOS: 16 nodes reported by PnP
BIOS; 16 recorded by driver
Dec 27 17:13:15 frycek kernel: PCI: Probing PCI hardware
Dec 27 17:13:15 frycek kernel: PCI: Probing PCI hardware (bus 00)
Dec 27 17:13:15 frycek kernel: PCI: 0000:00:07.3: class 604 doesn't
match header type 00. Ignoring class.
Dec 27 17:13:15 frycek kernel: PCI: Using IRQ router VIA [1106/0586]
at 0000:00:07.0
Dec 27 17:13:15 frycek kernel: pnp: the driver 'system' has been
registered
Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device
'00:07' and the driver 'system'
Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device
'00:08' and the driver 'system'
Dec 27 17:13:15 frycek kernel: pnp: match found with the PnP device
'00:0b' and the driver 'system'
Dec 27 17:13:15 frycek kernel: pnp: 00:0b: ioport range 0x208-0x20f
has been reserved
Dec 27 17:13:15 frycek kernel: Total HugeTLB memory allocated, 0
Dec 27 17:13:15 frycek kernel: VFS: Disk quotas dquot_6.5.1
Dec 27 17:13:15 frycek kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Dec 27 17:13:15 frycek kernel: devfs: 2004-01-31 Richard Gooch
(rgooch@atnf.csiro.au)
Dec 27 17:13:15 frycek kernel: devfs: boot_options: 0x1
Dec 27 17:13:15 frycek kernel: NTFS driver 2.1.22 [Flags: R/O DEBUG].
Dec 27 17:13:15 frycek kernel: Initializing Cryptographic API
Dec 27 17:13:15 frycek kernel: Activating ISA DMA hang workarounds.
Dec 27 17:13:15 frycek kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Dec 27 17:13:15 frycek kernel: vesafb: probe of vesafb0 failed with
error -6
Dec 27 17:13:15 frycek kernel: vga16fb: initializing
Dec 27 17:13:15 frycek kernel: vga16fb: mapped to 0xc00a0000
Dec 27 17:13:15 frycek kernel: fb0: VGA16 VGA frame buffer device
Dec 27 17:13:15 frycek kernel: isapnp: Scanning for PnP cards...
Dec 27 17:13:15 frycek kernel: isapnp: Card 'Analog Devices AD1816A'
Dec 27 17:13:15 frycek kernel: isapnp: 1 Plug & Play card detected total
Dec 27 17:13:15 frycek kernel: HDLC line discipline: version
$Revision: 4.8 $, maxframe=4096
Dec 27 17:13:15 frycek kernel: N_HDLC line discipline registered.
Dec 27 17:13:15 frycek kernel: Linux agpgart interface v0.100 (c)
Dave Jones
Dec 27 17:13:15 frycek kernel: agpgart: Detected VIA Apollo MVP3 chipset
Dec 27 17:13:15 frycek kernel: agpgart: Maximum main memory to use
for agp memory: 27M
Dec 27 17:13:15 frycek kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Dec 27 17:13:15 frycek kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 27 17:13:15 frycek kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 27 17:13:15 frycek kernel: io scheduler noop registered
Dec 27 17:13:15 frycek kernel: divert: not allocating divert_blk for
non-ethernet device lo
Dec 27 17:13:15 frycek kernel: PPP generic driver version 2.4.2
Dec 27 17:13:15 frycek kernel: PPP Deflate Compression module registered
Dec 27 17:13:15 frycek kernel: PPP BSD Compression module registered
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 24
Dec 27 17:13:15 frycek kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Dec 27 17:13:15 frycek kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Dec 27 17:13:15 frycek kernel: VP_IDE: IDE controller at PCI slot
0000:00:07.1
Dec 27 17:13:15 frycek kernel: VP_IDE: chipset revision 6
Dec 27 17:13:15 frycek kernel: VP_IDE: not 100%% native mode: will
probe irqs later
Dec 27 17:13:15 frycek kernel: VP_IDE: VIA vt82c586b (rev 41) IDE
UDMA33 controller on pci0000:00:07.1
Dec 27 17:13:15 frycek kernel:     ide0: BM-DMA at 0xe400-0xe407,
BIOS settings: hda:DMA, hdb:DMA
Dec 27 17:13:15 frycek kernel:     ide1: BM-DMA at 0xe408-0xe40f,
BIOS settings: hdc:DMA, hdd:DMA
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide0...
Dec 27 17:13:15 frycek kernel: hda: ST320413A, ATA DISK drive
Dec 27 17:13:15 frycek kernel: hdb: ST340810A, ATA DISK drive
Dec 27 17:13:15 frycek kernel: elevator: using noop as default io
scheduler
Dec 27 17:13:15 frycek kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide1...
Dec 27 17:13:15 frycek kernel: ide1: Wait for ready failed before
probe !
Dec 27 17:13:15 frycek kernel: hdc: ATAPI CD-ROM DRIVE 32X MAXIMUM,
ATAPI CD/DVD-ROM drive
Dec 27 17:13:15 frycek kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide2...
Dec 27 17:13:15 frycek kernel: ide2: Wait for ready failed before
probe !
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide3...
Dec 27 17:13:15 frycek kernel: ide3: Wait for ready failed before
probe !
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide4...
Dec 27 17:13:15 frycek kernel: ide4: Wait for ready failed before
probe !
Dec 27 17:13:15 frycek kernel: Probing IDE interface ide5...
Dec 27 17:13:15 frycek kernel: ide5: Wait for ready failed before
probe !
Dec 27 17:13:15 frycek kernel: hda: max request size: 128KiB
Dec 27 17:13:15 frycek kernel: hda: 39102336 sectors (20020 MB)
w/512KiB Cache, CHS=38792/16/63, UDMA(33)
Dec 27 17:13:15 frycek kernel: hda: cache flushes not supported
Dec 27 17:13:15 frycek kernel:  /dev/ide/host0/bus0/target0/lun0: p1
p2 p3 p4
Dec 27 17:13:15 frycek kernel: hdb: max request size: 128KiB
Dec 27 17:13:15 frycek kernel: hdb: Host Protected Area detected.
Dec 27 17:13:15 frycek kernel: ^Icurrent capacity is 66055248
sectors (33820 MB)
Dec 27 17:13:15 frycek kernel: ^Inative  capacity is 78165360
sectors (40020 MB)
Dec 27 17:13:15 frycek kernel: hdb: Host Protected Area disabled.
Dec 27 17:13:15 frycek kernel: hdb: 78165360 sectors (40020 MB)
w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Dec 27 17:13:15 frycek kernel: hdb: cache flushes not supported
Dec 27 17:13:15 frycek kernel:  /dev/ide/host0/bus0/target1/lun0: p1
p2 p3 p4 < p5 p6 p7 p8 >
Dec 27 17:13:15 frycek kernel: hdc: ATAPI 27X CD-ROM drive, 120kB Cache
Dec 27 17:13:15 frycek kernel: Uniform CD-ROM driver Revision: 3.20
Dec 27 17:13:15 frycek kernel: mice: PS/2 mouse device common for
all mice
Dec 27 17:13:15 frycek kernel: input: AT Translated Set 2 keyboard
on isa0060/serio0
Dec 27 17:13:15 frycek kernel: input: PS/2 Generic Mouse on
isa0060/serio1
Dec 27 17:13:15 frycek kernel: input: PC Speaker
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 2
Dec 27 17:13:15 frycek kernel: IP: routing cache hash table of 512
buckets, 4Kbytes
Dec 27 17:13:15 frycek kernel: TCP: Hash tables configured
(established 4096 bind 8192)
Dec 27 17:13:15 frycek kernel: ip_tables: (C) 2000-2002 Netfilter
core team
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 1
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 10
Dec 27 17:13:15 frycek kernel: IPv6 over IPv4 tunneling driver
Dec 27 17:13:15 frycek kernel: divert: not allocating divert_blk for
non-ethernet device sit0
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 17
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 15
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 8
Dec 27 17:13:15 frycek kernel: NET: Registered protocol family 20
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: VFS: Mounted root (ext3 filesystem)
readonly.
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: Mounted devfs on /dev
Dec 27 17:13:15 frycek kernel: Freeing unused kernel memory: 156k freed
Dec 27 17:13:15 frycek kernel: Real Time Clock Driver v1.12
Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal
Dec 27 17:13:15 frycek kernel: Adding 122968k swap on /dev/hdb2. 
Priority:-1 extents:1
Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: EXT3 FS on hda4, internal journal
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: EXT3 FS on hda2, internal journal
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: EXT3 FS on hda3, internal journal
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: NTFS volume version 3.0.
Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: found reiserfs format
"3.6" with standard journal
Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: using ordered data mode
Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: journal params:
device hdb5, size 8192, journal first block 18, max trans len 1024,
max batch 900, max commit age 30, max trans age 30
Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: checking transaction
log (hdb5)
Dec 27 17:13:15 frycek kernel: ReiserFS: hdb5: Using r5 hash to sort
names
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb6, internal journal
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: kjournald starting.  Commit interval
5 seconds
Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb7, internal journal
Dec 27 17:13:15 frycek kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Dec 27 17:13:15 frycek kernel: EXT3 FS on hdb1, internal journal
Dec 27 17:13:15 frycek kernel: Disabled Privacy Extensions on device
c03d1ac0(lo)
-------------------------

Fryderyk.

Re: Problems with 2.6.10

[Pedro Venda (SYSADM)]

Fryderyk Mazurek wrote:
> Hi everyone!
> 
> I have so strange problem with kernel 2.6.10. Kernel works good, but
> problem starts when I do reboot. On boot screen my bios can't detect
> my disk. Bios stops and nothing. So without end. Button reset on my
> towel can't fix it. To fix this situation I must turn off and turn
> on my computer. Only it helps. With kernel 2.6.9 wasn't so problem.
> How to fix it?

at first glance, I'd say hardware problem.

Are you positive you can't reproduce it with 2.6.9 or other kernels?

regards,
pedro venda.
-- 
Pedro João Lopes Venda
email: pjvenda@rnl.ist.utl.pt
http://maxwell.rnl.ist.utl.pt

Equipa de Administração de Sistemas
Rede das Novas Licenciaturas (RNL)
Instituto Superior Técnico
http://www.rnl.ist.utl.pt
http://mega.ist.utl.pt

Re: Problems with 2.6.10

[Len Brown]

On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:

> problem starts when I do reboot. On boot screen my bios can't detect
> my disk. Bios stops and nothing.

Does reboot work if the initial boot is with acpi=off?

Re: Problems with 2.6.10

[Fryderyk Mazurek]

Hello.

My kernel 2.6.10 I compiled two times. First with ACPI and second
fully without ACPI. And the same situation.
For me this situation is strange, because usually reset should help,
but not this time. I thought that maybe my BIOS is too old. But with
2.6.9 works. Therefore I don't know. Now I use 2.6.9.

Fryderyk.

---- Wiadomość Oryginalna ----
Od: Len Brown <len.brown@intel.com>
Do: Fryderyk Mazurek <dedyk@go2.pl>
Kopia do: linux-kernel@vger.kernel.org
Data: 27 Dec 2004 21:44:11 -0500
Temat: Re: Problems with 2.6.10

> On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
> 
> > problem starts when I do reboot. On boot screen my bios can't detect
> > my disk. Bios stops and nothing.
> 
> Does reboot work if the initial boot is with acpi=off?
> 
> 
> 

Re: Problems with 2.6.10

[Bill Davidsen]

Fryderyk Mazurek wrote:
> Hello.
> 
> My kernel 2.6.10 I compiled two times. First with ACPI and second
> fully without ACPI. And the same situation.
> For me this situation is strange, because usually reset should help,
> but not this time. I thought that maybe my BIOS is too old. But with
> 2.6.9 works. Therefore I don't know. Now I use 2.6.9.
> 
> Fryderyk.
> 
> ---- Wiadomość Oryginalna ----
> Od: Len Brown <len.brown@intel.com>
> Do: Fryderyk Mazurek <dedyk@go2.pl>
> Kopia do: linux-kernel@vger.kernel.org
> Data: 27 Dec 2004 21:44:11 -0500
> Temat: Re: Problems with 2.6.10
> 
> 
>>On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
>>
>>
>>>problem starts when I do reboot. On boot screen my bios can't detect
>>>my disk. Bios stops and nothing.
>>
>>Does reboot work if the initial boot is with acpi=off?

With that system, perhaps acpi=ht would be better if he uses the HT. And 
pci=routeirq may help as well, although it told me it was disabling 
IRQ18 and didn't!

-- 
bill davidsen <davidsen@tmr.com>
   CTO TMR Associates, Inc
   Doing interesting things with small computers since 1979

Re: Problems with 2.6.10

[Fryderyk Mazurek]

Hello!

I'm sorry, but acpi=routeirq doesn't work. But to my head came other
thing. I noticed that I on 2.6.9 (which correct works) I have this
part of dmesg:

hdb: Host Protected Area detected.
	current capacity is 66055248 sectors (33820 MB)
	native  capacity is 78165360 sectors (40020 MB)
hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63,
UDMA(33)

and on 2.6.10 I have:

hdb: Host Protected Area detected.
	current capacity is 66055248 sectors (33820 MB)
	native  capacity is 78165360 sectors (40020 MB)
hdb: Host Protected Area disabled.
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(33)

How see, first is 32GB (33820 MB), and second is 40GB (40020MB).
Correct value should be 32GB, in spite that my disk is 40GB. I want
to say, that I have a little old BIOS and my BIOS detect only 32GB,
therefore I have limited size of my disk. And maybe kernel 2.6.10
influence on my BIOS and force to detect 40GB, which is not
operable, because my BIOS is too old. I think that maybe to fix it I
should force my kernel to detect only 32GB, how on kernel 2.6.9.
Maybe this is a BUG of new kernel?

Fryderyk.

---- Wiadomość Oryginalna ----
Od: Bill Davidsen <davidsen@tmr.com>
Do: Fryderyk Mazurek <dedyk@go2.pl>
Kopia do: Len Brown <len.brown@intel.com>, linux-kernel@vger.kernel.org
Data: Wed, 29 Dec 2004 21:14:02 -0500
Temat: Re: Problems with 2.6.10

> Fryderyk Mazurek wrote:
> > Hello.
> > 
> > My kernel 2.6.10 I compiled two times. First with ACPI and second
> > fully without ACPI. And the same situation.
> > For me this situation is strange, because usually reset should help,
> > but not this time. I thought that maybe my BIOS is too old. But with
> > 2.6.9 works. Therefore I don't know. Now I use 2.6.9.
> > 
> > Fryderyk.
> > 
> > ---- Wiadomość Oryginalna ----
> > Od: Len Brown <len.brown@intel.com>
> > Do: Fryderyk Mazurek <dedyk@go2.pl>
> > Kopia do: linux-kernel@vger.kernel.org
> > Data: 27 Dec 2004 21:44:11 -0500
> > Temat: Re: Problems with 2.6.10
> > 
> > 
> >>On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
> >>
> >>
> >>>problem starts when I do reboot. On boot screen my bios can't
detect
> >>>my disk. Bios stops and nothing.
> >>
> >>Does reboot work if the initial boot is with acpi=off?
> 
> With that system, perhaps acpi=ht would be better if he uses the
HT. And 
> pci=routeirq may help as well, although it told me it was disabling 
> IRQ18 and didn't!
> 
> -- 
> bill davidsen <davidsen@tmr.com>
>    CTO TMR Associates, Inc
>    Doing interesting things with small computers since 1979
> 

Re: Problems with 2.6.10

[Bill Davidsen]

Fryderyk Mazurek wrote:
> Hello!
> 
> I'm sorry, but acpi=routeirq doesn't work. But to my head came other
> thing. I noticed that I on 2.6.9 (which correct works) I have this
> part of dmesg:

Not surprised, that should be pci=routeirq, as in the original post. Do 
you have preempt on?
> 
> hdb: Host Protected Area detected.
> 	current capacity is 66055248 sectors (33820 MB)
> 	native  capacity is 78165360 sectors (40020 MB)
> hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63,
> UDMA(33)
> 
> and on 2.6.10 I have:
> 
> hdb: Host Protected Area detected.
> 	current capacity is 66055248 sectors (33820 MB)
> 	native  capacity is 78165360 sectors (40020 MB)
> hdb: Host Protected Area disabled.
> hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(33)
> 
> How see, first is 32GB (33820 MB), and second is 40GB (40020MB).
> Correct value should be 32GB, in spite that my disk is 40GB. I want
> to say, that I have a little old BIOS and my BIOS detect only 32GB,
> therefore I have limited size of my disk. And maybe kernel 2.6.10
> influence on my BIOS and force to detect 40GB, which is not
> operable, because my BIOS is too old. I think that maybe to fix it I
> should force my kernel to detect only 32GB, how on kernel 2.6.9.
> Maybe this is a BUG of new kernel?
> 
> Fryderyk.
> 
> ---- Wiadomość Oryginalna ----
> Od: Bill Davidsen <davidsen@tmr.com>
> Do: Fryderyk Mazurek <dedyk@go2.pl>
> Kopia do: Len Brown <len.brown@intel.com>, linux-kernel@vger.kernel.org
> Data: Wed, 29 Dec 2004 21:14:02 -0500
> Temat: Re: Problems with 2.6.10
> 
> 
>>Fryderyk Mazurek wrote:
>>
>>>Hello.
>>>
>>>My kernel 2.6.10 I compiled two times. First with ACPI and second
>>>fully without ACPI. And the same situation.
>>>For me this situation is strange, because usually reset should help,
>>>but not this time. I thought that maybe my BIOS is too old. But with
>>>2.6.9 works. Therefore I don't know. Now I use 2.6.9.
>>>
>>>Fryderyk.
>>>
>>>---- Wiadomość Oryginalna ----
>>>Od: Len Brown <len.brown@intel.com>
>>>Do: Fryderyk Mazurek <dedyk@go2.pl>
>>>Kopia do: linux-kernel@vger.kernel.org
>>>Data: 27 Dec 2004 21:44:11 -0500
>>>Temat: Re: Problems with 2.6.10
>>>
>>>
>>>
>>>>On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
>>>>
>>>>
>>>>
>>>>>problem starts when I do reboot. On boot screen my bios can't
> 
> detect
> 
>>>>>my disk. Bios stops and nothing.
>>>>
>>>>Does reboot work if the initial boot is with acpi=off?
>>
>>With that system, perhaps acpi=ht would be better if he uses the
> 
> HT. And 
> 
>>pci=routeirq may help as well, although it told me it was disabling 
>>IRQ18 and didn't!


-- 
bill davidsen <davidsen@tmr.com>
   CTO TMR Associates, Inc
   Doing interesting things with small computers since 1979

Re: Problems with 2.6.10

[Fryderyk Mazurek]

Hello!

At last I fixed my problem! I changed source to not enable "Host
Protected Area". This means that on 2.6.10 I have 33,8GB disk, not
40GB, how on "true" 2.6.10. And now my BIOS detect my disk. But
question is, what does "true" kernel do, and why influence to BIOS?
Maybe this is kernel BUG?
Here is my diff's file. Maybe my patch is primitive, but it works.
Maybe somebody will do better patch.

My patch:
--- ./ide-disk-copy.c	2004-12-24 22:34:32.000000000 +0100
+++ ./ide-disk.c	2005-01-01 18:07:33.000000000 +0100
@@ -642,7 +642,9 @@
 			 drive->name,
 			 capacity, sectors_to_MB(capacity),
 			 set_max, sectors_to_MB(set_max));
-
+	
+	return;
+	
 	if (lba48)
 		set_max = idedisk_set_max_address_ext(drive, set_max);
 	else


I want to thank all who helped me and I wish a Happy New Year!

Fryderyk.

Re: Problems with 2.6.10

[Alan Cox]

On Llu, 2004-12-27 at 17:11, Fryderyk Mazurek wrote:
> Hi everyone!
> 
> I have so strange problem with kernel 2.6.10. Kernel works good, but
> problem starts when I do reboot. On boot screen my bios can't detect
> my disk. Bios stops and nothing. So without end. Button reset on my
> towel can't fix it. To fix this situation I must turn off and turn
> on my computer. Only it helps. With kernel 2.6.9 wasn't so problem.
> How to fix it?

The IDE code is meant to spin the drive down on poweroff but not on
"reboot". If the new power changes upset this then a few boxes will do
as you describe because the BIOS isn't bright enough to get the drive
powered back up.

Alan

Re: Problems with 2.6.10

[Fryderyk Mazurek]

Thank you for reply. My disk doesn't stop, when I do "reboot". I
hear as works (of course silently). Also when I turn off computer I
hear when spins the drive down. And one thing. I also saw that when
BIOS had detected disk (after 2.6.10) then light's disk went out.

Fryderyk.

PS. I want to say that my English is not good and maybe I did error.
If I did it, please forgive me.

---- Wiadomość Oryginalna ----
Od: Alan Cox <alan@lxorguk.ukuu.org.uk>
Do: Fryderyk Mazurek <dedyk@go2.pl>
Kopia do: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Data: Tue, 28 Dec 2004 14:27:53 +0000
Temat: Re: Problems with 2.6.10

> On Llu, 2004-12-27 at 17:11, Fryderyk Mazurek wrote:
> > Hi everyone!
> > 
> > I have so strange problem with kernel 2.6.10. Kernel works good, but
> > problem starts when I do reboot. On boot screen my bios can't detect
> > my disk. Bios stops and nothing. So without end. Button reset on my
> > towel can't fix it. To fix this situation I must turn off and turn
> > on my computer. Only it helps. With kernel 2.6.9 wasn't so problem.
> > How to fix it?
> 
> The IDE code is meant to spin the drive down on poweroff but not on
> "reboot". If the new power changes upset this then a few boxes will do
> as you describe because the BIOS isn't bright enough to get the drive
> powered back up.
> 
> Alan
> 
> 

Re: Problems with 2.6.10

[Bodo Eggert]

Fryderyk Mazurek wrote:

> At last I fixed my problem! I changed source to not enable "Host
> Protected Area". This means that on 2.6.10 I have 33,8GB disk, not
> 40GB, how on "true" 2.6.10. And now my BIOS detect my disk. But
> question is, what does "true" kernel do, and why influence to BIOS?
> Maybe this is kernel BUG?

I can see the reason why this happens: When you boot, your HDD will be in
a compatibility mode for broken BIOSes, but it will not enter compatibility
mode on reboot. (Is it supposed to work this way, or should the BIOS
completely reset the device?)

There may be two solutions for this problem:
 - Reset the drive (hdparm -w) before rebooting (just a quick workaround)
 - Remember the initial state during runtime and restore it before reboot

The first option may not work at all, I'm just guessing here.
The second option will require a feature enheancement to the IDE subsystem.

To quickly find out if option 1 is enough, you could boot a non-patched
kernel with init=/bin/sh. In the shell, enter:
# hdparm -w
# shutdown -n -r now

If it works for your problen, hdparm will probably disable propper access
to the HDD until reboot. (This could mean some other cases might be broken,
too.)

problems with 2.6.10

[bil]

Hi,
I've downloaded, configured and compiled 2.6.10 for my IBM Thinkpad A21m.
I've installed quite a few kernels over the years, and while not a
kernel expert, thought I understood enough to get by. Sadly when I
tried to boot up the new kernel I get a few error messages which I
can't figure out. Also, once the system is up my keyboard is DEAD.
My only option is the power-off button! My 'base' system is Mandrake 10.0.
I have been running 2.6.7 with only minor problems (hence the desire
to upgrade to 2.6.10).

The error messages that I've been able to find in the log are:
(I'm including an 'expected' message to indicate roughly the context)

Jan  5 08:22:33 felix kernel: Loaded 23850 symbols 
from /boot/System.map-2.6.10.
Jan  5 08:22:33 felix kernel: Symbols match kernel version 2.6.10.
Jan  5 08:22:33 felix kernel: No module symbols loaded - kernel modules not 
enabled.

This is right at the start of the log. Not sure if this means that the symbols
for the modules are not enabled, as various module-provided functions do
seem to be working. I can't run lsmod to check as the keyboard is dead.

Jan  5 08:22:33 felix kernel: Mounted devfs on /dev
Jan  5 08:22:33 felix kernel: jbd: version magic '2.6.3-7mdk 586 ' should be 
'2.6.10 PENTIUMIII gcc-3.3'
Jan  5 08:22:33 felix kernel: ext3: version magic '2.6.3-7mdk 586 ' should be 
'2.6.10 PENTIUMIII gcc-3.3'

Not sure if these are significant. 2.6.3-7mdk is the original Mandrake 10.0
kernel.

Jan  5 08:22:18 felix usb: Initializing USB controller (usb-uhci):  succeeded 
Jan  5 08:22:18 felix mount: mount: fs type usbdevfs not supported by kernel 
Jan  5 08:22:18 felix usb: Mount USB filesystem failed 

This worries me - I definitely have usbdevfs marked in the config:

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

Despite this, USB seems to be working OK, my mouse is USB and that was
responding when X11 had come up.

Jan  5 08:22:31 felix ifplugd(eth0)[1716]: Using interface eth0 
Jan  5 08:22:31 felix ifplugd(eth0)[1716]: Failed to detect plug status of 
eth0 
Jan  5 08:22:31 felix ifplugd(eth0)[1716]: Executing 
'/etc/ifplugd/ifplugd.action eth0 up'. 
Jan  5 08:22:31 felix ifplugd(eth0)[1716]: client: xircom_tulip_cb device eth0 
does not seem to be present, delaying initialization. 
Jan  5 08:22:31 felix ifplugd(eth0)[1716]: Program execution failed, return 
value is 1. 
Jan  5 08:22:31 felix ifplugd(eth0)[1716]: Exiting. 

This is serious! If the ethernet had come up, there was a chance that I
could have logged in via ssh to debug further. The ethernet comes up fine
under 2.6.7

That's all the error  messages that I could find. Everything else seemed
to be much as normal. I can live with a few error messages at boot-up
provided things continue to work, but a dead keyboard is a major setback.

After I rebooted back to 2.6.7 I checked the .config file, and checked
to see what modules were around and thought I'd found something - the
'input.ko' module was missing. Checking through using 'make xconfig'
I discovered that there was no option for this - it's just displayed
as a heading. However, checking the .config file shows 

CONFIG_INPUT=y

so I presume that the 'module' has been compiled into the kernel.

I'm not a subscriber to the lkml (too much traffic) so I'd appreciate
a direct reply if anyone can help. 

Many thanks

Bill
-- 
+-----------------------------------------------+
| Bill Purvis, thrice-retired software engineer |
| e-mail:  bil@beeb.net                         |
| web:     bil.members.beeb.net                 |
+-----------------------------------------------+