From: Luca Falavigna <dktrkranz@gmail.com>
To: vamsi_krishna@in.ibm.com, prasanna@in.ibm.com
Cc: Greg KH <greg@kroah.com>, Nathan Lynch <nathanl@austin.ibm.com>,
suparna@in.ibm.com, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Kprobes /proc entry
Date: Fri, 14 Jan 2005 00:20:20 +0100 [thread overview]
Message-ID: <41E70234.50900@gmail.com> (raw)
In-Reply-To: <20050111213400.GB18422@kroah.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Voilà! Here is kprobes debug patch via debugfs.
- --- ./kernel/kprobes.c 2005-01-13 20:41:11.000000000 +0100
+++ ./kernel/kprobes.c 2005-01-13 20:39:27.000000000 +0100
@@ -33,6 +33,9 @@
#include <linux/hash.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/kallsyms.h>
#include <asm/cacheflush.h>
#include <asm/errno.h>
#include <asm/kdebug.h>
@@ -131,6 +134,96 @@
unregister_kprobe(&jp->kp);
}
+#ifdef CONFIG_DEBUG_FS
+int kprobes_open(struct inode *inode, struct file *file)
+{
+ try_module_get(THIS_MODULE);
+ return 0;
+}
+
+int kprobes_release(struct inode *inode, struct file *file)
+{
+ module_put(THIS_MODULE);
+ return 0;
+}
+
+void kprobes_list_info(struct kprobe *k, char *p)
+{
+ ssize_t len = 0;
+ char *module, namebuf[KSYM_NAME_LEN+1];
+ const char *hook, *func;
+ unsigned long off, size, handler, addr = (unsigned long)k->addr;
+
+ if(k->pre_handler) {
+ handler = (unsigned long)k->pre_handler;
+ func = kallsyms_lookup(addr, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "PRE\t0x%lx(%s+%#lx)\t",
+ addr, func, off);
+ hook = kallsyms_lookup(handler, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "0x%lx(%s)\t%s\n", handler, hook,
+ strlen(module) ? module : "[built-in]");
+ }
+ if(k->post_handler) {
+ handler = (unsigned long)k->post_handler;
+ func = kallsyms_lookup(addr, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "POST\t0x%lx(%s+%#lx)\t",
+ addr, func, off);
+ hook = kallsyms_lookup(handler, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "0x%lx(%s)\t%s\n", handler, hook,
+ strlen(module) ? module : "[built-in]");
+ }
+ if(k->fault_handler) {
+ handler = (unsigned long)k->fault_handler;
+ func = kallsyms_lookup(addr, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "FAULT\t0x%lx(%s+%#lx)\t",
+ addr, func, off);
+ hook = kallsyms_lookup(handler, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "0x%lx(%s)\t%s\n", handler, hook,
+ strlen(module) ? module : "[built-in]");
+ }
+ if(k->break_handler) {
+ handler = (unsigned long)k->break_handler;
+ func = kallsyms_lookup(addr, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "BREAK\t0x%lx(%s+%#lx)\t",
+ addr, func, off);
+ hook = kallsyms_lookup(handler, &size, &off, &module, namebuf);
+ len += sprintf(p + len, "0x%lx(%s)\t%s\n", handler, hook,
+ strlen(module) ? module : "[built-in]");
+ }
+}
+
+ssize_t kprobes_read(struct file *file, char __user *buf,
+ size_t size, loff_t *off)
+{
+ int i;
+ char *data = "";
+ ssize_t len = 0;
+ struct hlist_head *head;
+ struct hlist_node *node;
+ struct kprobe *k;
+
+ spin_lock(&kprobe_lock);
+ for(i = 0; i < KPROBE_TABLE_SIZE; i++) {
+ head = &kprobe_table[i];
+ hlist_for_each(node, head) {
+ if((k = hlist_entry(node, struct kprobe, hlist))) {
+ kprobes_list_info(k, data + len);
+ len = strlen(data);
+ }
+ }
+ }
+ spin_unlock(&kprobe_lock);
+ return simple_read_from_buffer(buf, size, off, data, len);
+}
+
+struct dentry *kprobes_dir, *kprobes_list;
+struct file_operations kprobes_fops = {
+ .open = kprobes_open,
+ .read = kprobes_read,
+ .release = kprobes_release
+ };
+#endif
+
static int __init init_kprobes(void)
{
int i, err = 0;
@@ -140,6 +233,16 @@
for (i = 0; i < KPROBE_TABLE_SIZE; i++)
INIT_HLIST_HEAD(&kprobe_table[i]);
+#ifdef CONFIG_DEBUG_FS
+ if(!(kprobes_dir = debugfs_create_dir("kprobes", NULL)))
+ return -ENODEV;
+ if(!(kprobes_list = debugfs_create_file("list", S_IRUGO, kprobes_dir,
+ NULL, &kprobes_fops))) {
+ debugfs_remove(kprobes_dir);
+ return -ENODEV;
+ }
+#endif
+
err = register_die_notifier(&kprobe_exceptions_nb);
return err;
Signed-off-by: Luca Falavigna <dktrkranz@gmail.com>
Regards,
Luca
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iQEVAwUBQecCMxZrwl7j21nOAQKEawf/csjjWfFF/UlsN5qZQ3QyYJ1lTSSvuKnh
5ttGdB0hI3Qra+CIR6A/2qhUVomNTV4fcf80R6pMqOmUY61FmYFx2Mv6cRs4fqK3
BoLlOYYAKv3x5dgePdmI3n5ENss3UUYfTG5zd5ng3Qo2IqjwI/L2CR/CM1peXRV1
EXjhTmwU78c+0PLYHPwglDxawfkDO62AyMGqcytg0wFnDDfhjbIHrt48ynl6EIwL
oPvxQteQYSp15hRxAQbMRDz/1mzlhNMXZX6dKE15XrE31mk5P/iEaNadInv5r4DU
1ZFEpV0nKuJkmxSA4nVJHtLO7R+lqzkmFBmTBn9HT6Mh0U76aryixA==
=zQ7Z
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2005-01-13 23:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-10 16:25 [PATCH] Kprobes /proc entry Luca Falavigna
2005-01-10 18:14 ` Greg KH
2005-01-11 21:31 ` Nathan Lynch
2005-01-11 21:34 ` Greg KH
2005-01-12 0:09 ` Luca Falavigna
2005-01-12 6:35 ` Prasanna S Panchamukhi
2005-01-12 9:49 ` Prasanna S Panchamukhi
2005-01-13 23:20 ` Luca Falavigna [this message]
2005-01-13 23:34 ` Greg KH
2005-01-17 16:58 ` Luca Falavigna
2005-01-18 6:44 ` Greg KH
2005-01-20 14:13 ` Luca Falavigna
2005-01-14 0:22 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41E70234.50900@gmail.com \
--to=dktrkranz@gmail.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nathanl@austin.ibm.com \
--cc=prasanna@in.ibm.com \
--cc=suparna@in.ibm.com \
--cc=vamsi_krishna@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox