Re: i8042 access timings

[Jaco Kroon <jaco@kroon.co.za>]

Vojtech Pavlik wrote:
> On Thu, Jan 27, 2005 at 12:12:23PM +0100, Sebastian Piechocki wrote:
> 
>>Dnia czwartek, 27 stycznia 2005 11:25, Vojtech Pavlik napisał:
>>
>>>On Thu, Jan 27, 2005 at 08:23:07AM +0200, Jaco Kroon wrote:
>>>
>>>>Sebastian Piechocki wrote:
>>>>
>>>>>As I said I'm sending you mails from kernel masters:)
>>>>
>>>>Thanks.
>>>>
>>>>
>>>>>If you haven't such a problem, please send them your dmesg with
>>>>>i8042.debug and acpi=off.
>>>>
>>>>I made an alternative plan.  I applied a custom patch that gives me
>>>>far less output and prevents scrolling and gets what I hope is what
>>>>is required.
>>>
>>>... could you just increase the timeout value to some insane amount?
>>>That should take care of the AUX_LOOP output getting back only after
>>>issuing the next command.
>>
>>Increasing the timeout doesn't help. I've increased timout ten times and 
>>the result is the same.
> 
>  
> OK, in that case the BIOS i8042 emulation just interferes badly with the
> real i8042 and I doubt we can do much else than keep the BIOS from
> interfering.
> 
And just how do we do that?

-- 
There are only 10 kinds of people in this world,
   those that understand binary and those that don't.
http://www.kroon.co.za/