tuner: Ignoring new-style parameters in presence of obsolete ones
tda9887: Ignoring new-style parameters in presence of obsolete ones
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 185, latency: 64, mmio: 0xf4b00000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tda9885/6/7: chip found @ 0x86
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
tda9885/6/7: Oops: no tvnorm entry found
tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00
tda9885/6/7: write: byte B 0xc0
  B0   video mode      : sound trap
  B1   auto mute fm    : no
  B2   carrier mode    : Intercarrier
  B3-4 tv sound/radio  : AM/TV
  B5   force mute audio: no
  B6   output port 1   : high
  B7   output port 2   : high
tda9885/6/7: write: byte C 0x10
  C0-4 top adjustment  : 0 dB
  C5-6 de-emphasis     : no
  C7   audio gain      : 0
tda9885/6/7: write: byte E 0x00
  E0-1 sound carrier   : 4.5 MHz
  E6   l pll ganting   : 13
  E2-4 video if        : 58.75 MHz
  E5   tuner gain      : normal
  E7   vif agc output  : pin3+pin22 port
--
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: MT2032 hexdump:
 24 27 ff 0f 1f f7 e4 8c  c3 4e ec d4 0a 32 28 22
  ff 4d 54 04 04
 tuner: microtune: companycode=4d54 part=04 rev=04
mt2032: xogc = 0x07
mt2032: xok = 0x00
mt2032: xogc = 0x06
mt2032: xogc = 0x06
mt2032: xok = 0x00
mt2032: xogc = 0x05
mt2032: xogc = 0x05
mt2032: xok = 0x00
mt2032: xogc = 0x04
mt2032: xogc = 0x04
mt2032: xok = 0x00
mt2032: xogc = 0x03
tuner: microtune MT2032 found, OK
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok