* [PATCH] Fix IPMI SMBus driver to select the I2C layer instead of depend on it
@ 2005-02-09 17:25 Corey Minyard
0 siblings, 0 replies; only message in thread
From: Corey Minyard @ 2005-02-09 17:25 UTC (permalink / raw)
To: Andrew Morton, lkml
[-- Attachment #1: Type: text/plain, Size: 83 bytes --]
This is on top of the IPMI SMBus driver in the current mm kernel.
Thanks,
-Corey
[-- Attachment #2: ipmi_smb_config.diff --]
[-- Type: text/plain, Size: 700 bytes --]
Make the IPMI SMBus select I2C, not depend on it, so I2C gets
enabled properly when the IPMI SMBus is enabled.
Signed-off-by: Corey Minyard <minyard@acm.org>
Index: linux-2.6.11-rc3/drivers/char/ipmi/Kconfig
===================================================================
--- linux-2.6.11-rc3.orig/drivers/char/ipmi/Kconfig
+++ linux-2.6.11-rc3/drivers/char/ipmi/Kconfig
@@ -53,7 +53,8 @@
config IPMI_SMB
tristate 'IPMI SMBus handler'
- depends on IPMI_HANDLER && I2C
+ depends on IPMI_HANDLER
+ select I2C
help
Provides a driver for a SMBus interface to a BMC, meaning that you
have a driver that must be accessed over an I2C bus instead of a
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-02-09 17:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-09 17:25 [PATCH] Fix IPMI SMBus driver to select the I2C layer instead of depend on it Corey Minyard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox