* [PATCH] Update to IPMI driver to support old DMI spec
@ 2005-02-09 17:24 Corey Minyard
2005-02-09 21:36 ` Bukie Mabayoje
0 siblings, 1 reply; 3+ messages in thread
From: Corey Minyard @ 2005-02-09 17:24 UTC (permalink / raw)
To: Andrew Morton, lkml
[-- Attachment #1: Type: text/plain, Size: 221 bytes --]
BTW, I'm also working with the person who had the trouble with the I2C
non-blocking driver updates, but we haven't figured it out yet.
Hopefully soon. (Though that has nothing to do with this patch.)
Thanks,
-Corey
[-- Attachment #2: ipmi_olddmi.diff --]
[-- Type: text/plain, Size: 2621 bytes --]
The 1999 version of the DMI spec had a different configuration
than the newer versions for the IPMI configuration information.
This patch handles the differences between the two.
Signed-off-by: Corey Minyard <minyard@acm.org>
Index: linux-2.6.11-rc3/drivers/char/ipmi/ipmi_si_intf.c
===================================================================
--- linux-2.6.11-rc3.orig/drivers/char/ipmi/ipmi_si_intf.c
+++ linux-2.6.11-rc3/drivers/char/ipmi/ipmi_si_intf.c
@@ -1578,46 +1578,53 @@
u8 *data = (u8 *)dm;
unsigned long base_addr;
u8 reg_spacing;
+ u8 len = dm->length;
dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
ipmi_data->type = data[4];
memcpy(&base_addr, data+8, sizeof(unsigned long));
- if (base_addr & 1) {
- /* I/O */
- base_addr &= 0xFFFE;
+ if (len >= 0x11) {
+ if (base_addr & 1) {
+ /* I/O */
+ base_addr &= 0xFFFE;
+ ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
+ }
+ else {
+ /* Memory */
+ ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
+ }
+ /* If bit 4 of byte 0x10 is set, then the lsb for the address
+ is odd. */
+ ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
+
+ ipmi_data->irq = data[0x11];
+
+ /* The top two bits of byte 0x10 hold the register spacing. */
+ reg_spacing = (data[0x10] & 0xC0) >> 6;
+ switch(reg_spacing){
+ case 0x00: /* Byte boundaries */
+ ipmi_data->offset = 1;
+ break;
+ case 0x01: /* 32-bit boundaries */
+ ipmi_data->offset = 4;
+ break;
+ case 0x02: /* 16-byte boundaries */
+ ipmi_data->offset = 16;
+ break;
+ default:
+ /* Some other interface, just ignore it. */
+ return -EIO;
+ }
+ } else {
+ /* Old DMI spec. */
+ ipmi_data->base_addr = base_addr;
ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
- }
- else {
- /* Memory */
- ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
- }
-
- /* The top two bits of byte 0x10 hold the register spacing. */
- reg_spacing = (data[0x10] & 0xC0) >> 6;
- switch(reg_spacing){
- case 0x00: /* Byte boundaries */
ipmi_data->offset = 1;
- break;
- case 0x01: /* 32-bit boundaries */
- ipmi_data->offset = 4;
- break;
- case 0x02: /* 16-byte boundaries */
- ipmi_data->offset = 16;
- break;
- default:
- /* Some other interface, just ignore it. */
- return -EIO;
}
ipmi_data->slave_addr = data[6];
- /* If bit 4 of byte 0x10 is set, then the lsb for the address
- is odd. */
- ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
-
- ipmi_data->irq = data[0x11];
-
if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) {
dmi_data_entries++;
return 0;
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] Update to IPMI driver to support old DMI spec
2005-02-09 17:24 [PATCH] Update to IPMI driver to support old DMI spec Corey Minyard
@ 2005-02-09 21:36 ` Bukie Mabayoje
2005-02-09 21:39 ` Corey Minyard
0 siblings, 1 reply; 3+ messages in thread
From: Bukie Mabayoje @ 2005-02-09 21:36 UTC (permalink / raw)
To: Corey Minyard; +Cc: Andrew Morton, lkml
Corey Minyard wrote:
> BTW, I'm also working with the person who had the trouble with the I2C
> non-blocking driver updates, but we haven't figured it out yet.
> Hopefully soon. (Though that has nothing to do with this patch.)
>
> Thanks,
>
> -Corey
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> The 1999 version of the DMI spec had a different configuration
> than the newer versions for the IPMI configuration information.
Are you referring to the System Management BIOS Reference Specification version 2.3.1 16 March 1999?
>
> This patch handles the differences between the two.
>
> Signed-off-by: Corey Minyard <minyard@acm.org>
>
> Index: linux-2.6.11-rc3/drivers/char/ipmi/ipmi_si_intf.c
> ===================================================================
> --- linux-2.6.11-rc3.orig/drivers/char/ipmi/ipmi_si_intf.c
> +++ linux-2.6.11-rc3/drivers/char/ipmi/ipmi_si_intf.c
> @@ -1578,46 +1578,53 @@
> u8 *data = (u8 *)dm;
> unsigned long base_addr;
> u8 reg_spacing;
> + u8 len = dm->length;
> dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
>
> ipmi_data->type = data[4];
>
> memcpy(&base_addr, data+8, sizeof(unsigned long));
> - if (base_addr & 1) {
> - /* I/O */
> - base_addr &= 0xFFFE;
> + if (len >= 0x11) {
> + if (base_addr & 1) {
> + /* I/O */
> + base_addr &= 0xFFFE;
> + ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
> + }
> + else {
> + /* Memory */
> + ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
> + }
> + /* If bit 4 of byte 0x10 is set, then the lsb for the address
> + is odd. */
> + ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
> +
> + ipmi_data->irq = data[0x11];
> +
> + /* The top two bits of byte 0x10 hold the register spacing. */
> + reg_spacing = (data[0x10] & 0xC0) >> 6;
> + switch(reg_spacing){
> + case 0x00: /* Byte boundaries */
> + ipmi_data->offset = 1;
> + break;
> + case 0x01: /* 32-bit boundaries */
> + ipmi_data->offset = 4;
> + break;
> + case 0x02: /* 16-byte boundaries */
> + ipmi_data->offset = 16;
> + break;
> + default:
> + /* Some other interface, just ignore it. */
> + return -EIO;
> + }
> + } else {
> + /* Old DMI spec. */
> + ipmi_data->base_addr = base_addr;
> ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
> - }
> - else {
> - /* Memory */
> - ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
> - }
> -
> - /* The top two bits of byte 0x10 hold the register spacing. */
> - reg_spacing = (data[0x10] & 0xC0) >> 6;
> - switch(reg_spacing){
> - case 0x00: /* Byte boundaries */
> ipmi_data->offset = 1;
> - break;
> - case 0x01: /* 32-bit boundaries */
> - ipmi_data->offset = 4;
> - break;
> - case 0x02: /* 16-byte boundaries */
> - ipmi_data->offset = 16;
> - break;
> - default:
> - /* Some other interface, just ignore it. */
> - return -EIO;
> }
>
> ipmi_data->slave_addr = data[6];
>
> - /* If bit 4 of byte 0x10 is set, then the lsb for the address
> - is odd. */
> - ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
> -
> - ipmi_data->irq = data[0x11];
> -
> if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) {
> dmi_data_entries++;
> return 0;
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] Update to IPMI driver to support old DMI spec
2005-02-09 21:36 ` Bukie Mabayoje
@ 2005-02-09 21:39 ` Corey Minyard
0 siblings, 0 replies; 3+ messages in thread
From: Corey Minyard @ 2005-02-09 21:39 UTC (permalink / raw)
To: Bukie Mabayoje; +Cc: Andrew Morton, lkml
Bukie Mabayoje wrote:
>Corey Minyard wrote:
>
>
>
>>BTW, I'm also working with the person who had the trouble with the I2C
>>non-blocking driver updates, but we haven't figured it out yet.
>>Hopefully soon. (Though that has nothing to do with this patch.)
>>
>>Thanks,
>>
>>-Corey
>>
>> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>The 1999 version of the DMI spec had a different configuration
>>than the newer versions for the IPMI configuration information.
>>
>>
>
>Are you referring to the System Management BIOS Reference Specification version 2.3.1 16 March 1999?
>
>
Yes, that is correct.
-Corey
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-02-09 21:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-09 17:24 [PATCH] Update to IPMI driver to support old DMI spec Corey Minyard
2005-02-09 21:36 ` Bukie Mabayoje
2005-02-09 21:39 ` Corey Minyard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox