[PATCH][PPC32] Move irq_desc[].status, IRQ_LEVEL bit setup to xilinx_pic.c

[Andrei Konovalov <akonovalov@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 337 bytes --]

This patch applies to the kernel 2.6.11-rc3.
It moves the code that informs the kernel if the particular interrupt is edge triggered
or level sensitive from the board specific file to a "CONFIG_VIRTEX_II_PRO-specific" file.
Using old IRQ numbering in that code is also fixed.

Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>


[-- Attachment #2: xilinx_pic.diff --]
[-- Type: text/plain, Size: 1764 bytes --]

diff -uprN linux-2.5.base/arch/ppc/platforms/4xx/xilinx_ml300.c linux-2.5.cur/arch/ppc/platforms/4xx/xilinx_ml300.c
--- linux-2.5.base/arch/ppc/platforms/4xx/xilinx_ml300.c	2005-02-11 17:19:08.000000000 +0300
+++ linux-2.5.cur/arch/ppc/platforms/4xx/xilinx_ml300.c	2005-02-14 18:37:26.000000000 +0300
@@ -122,25 +122,7 @@ ml300_setup_arch(void)
 void __init
 ml300_init_irq(void)
 {
-	unsigned int i;
-
 	ppc4xx_init_IRQ();
-
-	/*
-	 * For PowerPC 405 cores the default value for NR_IRQS is 32.
-	 * See include/asm-ppc/irq.h for details.
-	 * This is just fine for ML300.
-	 */
-#if (NR_IRQS != 32)
-#error NR_IRQS must be 32 for ML300
-#endif
-
-	for (i = 0; i < NR_IRQS; i++) {
-		if (XPAR_INTC_0_KIND_OF_INTR & (0x80000000 >> i))
-			irq_desc[i].status &= ~IRQ_LEVEL;
-		else
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
 }
 
 void __init
diff -uprN linux-2.5.base/arch/ppc/syslib/xilinx_pic.c linux-2.5.cur/arch/ppc/syslib/xilinx_pic.c
--- linux-2.5.base/arch/ppc/syslib/xilinx_pic.c	2005-02-11 17:20:49.000000000 +0300
+++ linux-2.5.cur/arch/ppc/syslib/xilinx_pic.c	2005-02-14 16:57:40.000000000 +0300
@@ -114,6 +114,14 @@ ppc4xx_pic_init(void)
 {
 	int i;
 
+	/*
+	 * NOTE: The assumption here is that NR_IRQS is 32 or less
+	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
+	 */
+#if (NR_IRQS > 32)
+#error NR_IRQS > 32 not supported
+#endif
+
 #if XPAR_XINTC_USE_DCR == 0
 	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
 
@@ -138,6 +146,12 @@ ppc4xx_pic_init(void)
 
 	ppc_md.get_irq = xilinx_pic_get_irq;
 
-	for (i = 0; i < NR_IRQS; ++i)
+	for (i = 0; i < NR_IRQS; ++i) {
 		irq_desc[i].handler = &xilinx_intc;
+
+		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
+			irq_desc[i].status &= ~IRQ_LEVEL;
+		else
+			irq_desc[i].status |= IRQ_LEVEL;
+	}
 }