From: Helge Hafting <helge.hafting@aitel.hist.no>
To: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
Date: Wed, 23 Feb 2005 14:06:10 +0100 [thread overview]
Message-ID: <421C7FC2.1090402@aitel.hist.no> (raw)
In-Reply-To: <20050223014233.6710fd73.akpm@osdl.org>
This kernel came up, but my boot script complained about no /dev/hdb3
when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.)
They are usually hda, hdb, and hdc.
MAKEDEV hdq did not help. Looking at sysfs, it turns out that
/dev/hdq1 is at major:3 minor:1025 if I interpret things right.
(/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead.
So I didn't get to test this mysterious device.
But I assume this is a mistake of some sort, I haven't heard about any
change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
It may be interesting to note that my root raid-1 came up fine,
consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
Helge Hafting
next prev parent reply other threads:[~2005-02-23 13:03 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
2005-02-23 11:03 ` 2.6.11-rc4-mm1 Mathieu Segaud
2005-02-23 16:32 ` 2.6.11-rc4-mm1 Robert Love
2005-02-23 13:06 ` Helge Hafting [this message]
2005-02-23 20:12 ` 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ? Andrew Morton
2005-02-23 22:36 ` Laurent Riffard
2005-02-23 23:11 ` Matt Mackall
2005-02-23 23:20 ` Andrew Morton
2005-02-24 17:02 ` Laurent Riffard
2005-02-23 23:47 ` Greg KH
2005-02-24 17:06 ` Laurent Riffard
2005-02-24 17:18 ` Greg KH
2005-02-24 20:42 ` Laurent Riffard
2005-02-24 23:17 ` Greg KH
2005-02-23 23:32 ` Mathieu Segaud
2005-02-24 0:17 ` Matt Mackall
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
2005-02-23 20:17 ` Andrew Morton
2005-02-23 22:10 ` Steven Cole
2005-02-23 22:54 ` Steven Cole
2005-02-24 0:16 ` Andrew Morton
2005-02-24 0:25 ` Andrew Morton
2005-02-24 13:19 ` Bartlomiej Zolnierkiewicz
2005-02-25 0:20 ` Felipe Alfaro Solana
2005-02-24 0:41 ` Matt Mackall
2005-02-24 2:03 ` Benoit Boissinot
2005-02-24 2:08 ` Matt Mackall
2005-02-23 23:03 ` Andrew Morton
2005-02-23 23:03 ` Matt Mackall
2005-02-24 0:44 ` Matt Mackall
2005-02-24 15:59 ` Steven Cole
2005-02-24 16:18 ` Steven Cole
2005-02-23 22:45 ` Matt Mackall
2005-02-23 17:07 ` 2.6.11-rc4-mm1 Vincent Vanackere
2005-02-23 18:20 ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 21:24 ` 2.6.11-rc4-mm1 Dominik Brodowski
2005-02-23 22:00 ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 23:56 ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 21:05 ` 2.6.11-rc4-mm1 Benoit Boissinot
2005-02-23 21:42 ` [PATCH] process-wide itimer typo fixes Roland McGrath
2005-02-23 21:30 ` 2.6.11-rc4-mm1 Adrian Bunk
2005-02-23 21:49 ` 2.6.11-rc4-mm1 (compile stats) John Cherry
2005-02-23 22:22 ` 2.6.11-rc4-mm1 Francois Romieu
2005-02-23 22:38 ` 2.6.11-rc4-mm1 J.A. Magallon
2005-02-23 23:12 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-23 23:40 ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-24 0:20 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-24 0:26 ` 2.6.11-rc4-mm1 Fabian Fenaut
2005-02-25 0:06 ` 2.6.11-rc4-mm1 J.A. Magallon
2005-02-25 3:18 ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-23 23:07 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-23 23:25 ` 2.6.11-rc4-mm1 Andrew Morton
2005-02-24 11:11 ` 2.6.11-rc4-mm1: infiniband/core/user_mad.c warning Adrian Bunk
2005-02-24 11:11 ` [-mm patch] drivers/md/dm-hw-handler.c: fix compile warnings Adrian Bunk
2005-02-24 21:51 ` [-mm patch] seccomp: don't say it was more or less mandatory Adrian Bunk
2005-02-24 22:41 ` Andrea Arcangeli
2005-02-25 21:14 ` Adrian Bunk
2005-02-26 1:31 ` Andrea Arcangeli
2005-03-01 0:32 ` Adrian Bunk
2005-03-01 0:44 ` Andrea Arcangeli
2005-03-03 14:51 ` Adrian Bunk
2005-03-03 16:24 ` Andrea Arcangeli
2005-03-03 21:55 ` Andrew Morton
2005-03-15 10:09 ` Ingo Molnar
2005-03-15 10:15 ` Ingo Molnar
2005-03-15 11:27 ` Ingo Molnar
2005-03-15 13:00 ` Andrea Arcangeli
2005-03-15 14:44 ` Ingo Molnar
2005-03-15 14:59 ` Andrea Arcangeli
2005-03-15 15:00 ` Ingo Molnar
2005-03-15 15:05 ` Ingo Molnar
2005-03-15 16:44 ` Andrea Arcangeli
2005-03-16 8:28 ` Ingo Molnar
2005-03-16 10:46 ` Andrea Arcangeli
2005-03-16 13:41 ` Ingo Molnar
2005-03-16 17:28 ` Andrea Arcangeli
2005-03-17 10:27 ` Ingo Molnar
2005-03-17 10:49 ` Andrea Arcangeli
2005-02-26 11:31 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
2005-03-02 6:43 ` Jeff Garzik
2005-03-02 14:08 ` Adrian Bunk
2005-03-02 19:12 ` Jeff Garzik
2005-03-02 20:38 ` Andrew Morton
2005-03-02 21:07 ` Jeff Garzik
2005-03-02 21:18 ` Andrew Morton
2005-03-02 21:56 ` Adrian Bunk
2005-03-02 22:14 ` Andrew Morton
2005-03-02 22:41 ` Jeff Garzik
2005-03-02 22:45 ` Adrian Bunk
2005-03-02 22:49 ` Jeff Garzik
2005-03-03 15:07 ` How to handle the multiple aes variants on i386? Adrian Bunk
2005-03-02 21:59 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
2005-02-27 15:48 ` [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups Adrian Bunk
2005-02-27 22:23 ` Christoph Hellwig
2005-02-28 18:07 ` [-mm patch] drivers/scsi/ch.c: make a struct static Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=421C7FC2.1090402@aitel.hist.no \
--to=helge.hafting@aitel.hist.no \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox