public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>,
	linux-kernel@vger.kernel.org, CARLOS.PALMINHA@synopsys.com
Subject: Re: [PATCH] reset: Make optional functions really optional.
Date: Fri, 23 Dec 2016 13:23:10 +0200	[thread overview]
Message-ID: <4238328.E0tRokcGUd@avalon> (raw)
In-Reply-To: <1482490737.2394.37.camel@pengutronix.de>

Hello,

On Friday 23 Dec 2016 11:58:57 Philipp Zabel wrote:
> Am Donnerstag, den 15.12.2016, 18:05 +0000 schrieb Ramiro Oliveira:
> > Up until now optional functions in the reset API were similar to the non
> > optional.
> > 
> > This patch corrects that, while maintaining compatibility with existing
> > drivers.
> > 
> > As suggested here: https://lkml.org/lkml/2016/12/14/502
> > 
> > Signed-off-by: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
> > ---
> > 
> >  drivers/reset/core.c  | 21 +++++++++++++++++++--
> >  include/linux/reset.h | 46 ++++++++++++++++++++++++++++++++++++++++++----
> >  2 files changed, 61 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/reset/core.c b/drivers/reset/core.c
> > index 395dc9c..6150e7c 100644
> > --- a/drivers/reset/core.c
> > +++ b/drivers/reset/core.c
> > @@ -135,9 +135,14 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register);
> >   * @rstc: reset controller
> >   *
> >   * Calling this on a shared reset controller is an error.
> > + *
> > + * If it's an optional reset it will return 0.
> 
> I'd prefer this to explicitly mention that rstc==NULL means this is an
> optional reset:
> 
> "If rstc is NULL it is an optional reset and the function will just
> return 0."

Maybe we should document in a single place that NULL is a valid value for a 
reset_control pointer and will result in the API behaving as a no-op ? If you 
want to duplicate the information I'd still prefer talking about no-op than 
about "just returning 0".

> >   */
> >  int reset_control_reset(struct reset_control *rstc)
> >  {
> > +	if (!rstc)
> > +		return 0;
> > +
> >  	if (WARN_ON(rstc->shared))
> >  		return -EINVAL;
> > 
> > @@ -158,9 +163,14 @@ EXPORT_SYMBOL_GPL(reset_control_reset);
> >   *
> >   * For shared reset controls a driver cannot expect the hw's registers
> >   and
> >   * internal state to be reset, but must be prepared for this to happen.
> > + *
> > + * If it's an optional reset it will return 0.
> 
> Same as above.
> 
> >   */
> >  
> >  int reset_control_assert(struct reset_control *rstc)
> >  {
> > +	if (!rstc)
> > +		return 0;
> > +
> >  	if (!rstc->rcdev->ops->assert)
> >  		return -ENOTSUPP;
> > 
> > @@ -180,10 +190,14 @@ EXPORT_SYMBOL_GPL(reset_control_assert);
> >   * reset_control_deassert - deasserts the reset line
> >   * @rstc: reset controller
> >   *
> > - * After calling this function, the reset is guaranteed to be deasserted.
> > + * After calling this function, the reset is guaranteed to be deasserted,
> > if
> > + * it's not optional.
>
> Same as above.
> 
> >   */
> >  int reset_control_deassert(struct reset_control *rstc)
> >  {
> > +	if (!rstc)
> > +		return 0;
> > +
> >  	if (!rstc->rcdev->ops->deassert)
> >  		return -ENOTSUPP;
> > 
> > @@ -199,11 +213,14 @@ EXPORT_SYMBOL_GPL(reset_control_deassert);
> >  /**
> >   * reset_control_status - returns a negative errno if not supported, a
> >   * positive value if the reset line is asserted, or zero if the reset
> > - * line is not asserted.
> > + * line is not asserted or if the desc is NULL (optional reset).
> >   * @rstc: reset controller
> >   */
> >  int reset_control_status(struct reset_control *rstc)
> >  {
> > +	if (!rstc)
> > +		return 0;
> > +
> >  	if (rstc->rcdev->ops->status)
> >  		return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
> > 
> > diff --git a/include/linux/reset.h b/include/linux/reset.h
> > index 5daff15..1af1e62 100644
> > --- a/include/linux/reset.h
> > +++ b/include/linux/reset.h
> > @@ -138,13 +138,33 @@ static inline struct reset_control
> > *reset_control_get_shared(> 
> >  static inline struct reset_control *reset_control_get_optional_exclusive(
> >  					struct device *dev, const char *id)
> >  {
> > -	return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0);
> > +	struct reset_control *desc;
> > +
> > +	desc = __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0);
> 
> Note that the __of_reset_control_get stub returns -ENOTSUPP if
> CONFIG_RESET_CONTROLLER is disabled.
> 
> > +	if (IS_ERR(desc)) {
> > +		if (PTR_ERR(desc) == -ENOENT)
> > +			return NULL;
> > +	}
> > +
> > +	return desc;
> > +
> >  }
> >  
> >  static inline struct reset_control *reset_control_get_optional_shared(
> >  					struct device *dev, const char *id)
> >  {
> > -	return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1);
> > +
> > +	struct reset_control *desc;
> > +
> > +	desc = __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1);
> > +
> > +	if (IS_ERR(desc)) {
> > +		if (PTR_ERR(desc) == -ENOENT)
> > +			return NULL;
> > +	}
> 
> With this duplication, I think it might be better to add an int optional
> parameter

What's wrong with bool by the way ? :-)

> to __of_reset_control_get and let that return NULL if optional
> is set and either of_property_match_string or of_parse_phandle_with_args
> would cause an -ENOENT return.
> 
> The stub could then
> 	return optional ? NULL : ERR_PTR(-EONOENT);
> 
> > +	return desc;
> >  }
> >  
> >  /**
> > @@ -273,13 +293,31 @@ static inline struct reset_control
> > *devm_reset_control_get_shared(
> >  static inline struct reset_control
> >  *devm_reset_control_get_optional_exclusive(
> >  					struct device *dev, const char *id)
> >  {
> > -	return __devm_reset_control_get(dev, id, 0, 0);
> > +	struct reset_control *desc;
> > +
> > +	desc = __devm_reset_control_get(dev, id, 0, 0);
> > +
> > +	if (IS_ERR(desc)) {
> > +		if (PTR_ERR(desc) == -ENOENT)
> > +			return NULL;
> > +	}
> 
> Same as for __of_reset_control_get above.
> 
> > +	return desc;
> >  }
> >  
> >  static inline struct reset_control
> >  *devm_reset_control_get_optional_shared(
> >  					struct device *dev, const char *id)
> >  {
> > -	return __devm_reset_control_get(dev, id, 0, 1);
> > +	struct reset_control *desc;
> > +
> > +	desc = __devm_reset_control_get(dev, id, 0, 1);
> > +
> > +	if (IS_ERR(desc)) {
> > +		if (PTR_ERR(desc) == -ENOENT)
> > +			return NULL;
> > +	}
> > +
> > +	return desc;
> >  }
> >  
> >  /**

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2016-12-23 11:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-15 18:05 [PATCH] reset: Make optional functions really optional Ramiro Oliveira
2016-12-23 10:58 ` Philipp Zabel
2016-12-23 11:23   ` Laurent Pinchart [this message]
2016-12-23 12:08     ` Philipp Zabel
2016-12-23 16:41       ` Laurent Pinchart
2016-12-23 16:53         ` Ramiro Oliveira
2016-12-23 17:19       ` Ramiro Oliveira
2016-12-23 17:57         ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4238328.E0tRokcGUd@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=CARLOS.PALMINHA@synopsys.com \
    --cc=Ramiro.Oliveira@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox