From: Elmer Joandi <elmer@ylenurme.ee>
To: linux-kernel@vger.kernel.org
Subject: ACPI suspend lockup 2.6.10, works with 2.6.11
Date: Sat, 19 Mar 2005 11:15:58 +0200 [thread overview]
Message-ID: <423BEDCE.30900@ylenurme.ee> (raw)
on 15 Feb I complained about 2.6.10, now it works now, with 2.6.11.
However, there are two warnings still, below.
PM: Preparing system for suspend
Stopping tasks:
============================================================|
PM: Entering state.
Back to C!
Debug: sleeping function called from invalid context at mm/slab.c:2082
in_atomic():0, irqs_disabled():1
[<c012102c>] __might_sleep+0xac/0xc0
[<c016047b>] kmem_cache_alloc+0x5b/0x60
[<c026c5aa>] acpi_pci_link_set+0x43/0x193
[<c026ca09>] irqrouter_resume+0x1c/0x30
[<c02a8e47>] sysdev_resume+0xf7/0xfc
[<c02ad8e5>] device_power_up+0x5/0xa
[<c014b995>] suspend_enter+0x35/0x50
[<c014ba35>] enter_state+0x55/0x90
[<c02697b6>] acpi_suspend+0x25/0x33
[<c0238088>] copy_from_user+0x58/0x90
[<c0269895>] acpi_system_write_sleep+0x69/0x7a
[<c0181b83>] vfs_write+0xc3/0x130
[<c0181cb7>] sys_write+0x47/0x80
[<c0103b49>] sysenter_past_esp+0x52/0x75
PM: Finishing up.
----> point of previous lockup here
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
Restarting tasks... done
ALPS Touchpad (Glidepoint) detected
Disabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio4
lspci:
00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller
(rev 03)
00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97
Audio Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf
[Radeon Mobility 9000 M9] (rev 01)
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini
PCI Adapter (rev 04)
02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
reply other threads:[~2005-03-19 9:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=423BEDCE.30900@ylenurme.ee \
--to=elmer@ylenurme.ee \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox