From: Mark Seger <Mark.Seger@hp.com>
To: axboe@suse.de, linux-kernel@vger.kernel.org
Subject: Patch for inconsistent recording of block device statistics
Date: Tue, 22 Mar 2005 16:50:11 -0500 [thread overview]
Message-ID: <42409313.1010308@hp.com> (raw)
The read/write statistics for both sectors and merges are calculated at
the time requests first enter the request queue but the remainder of the
statistics, such as the number of read/writes are calculated at the time
the I/O completes. As a result, one cannot accurately determine the
data rates read or written at the actual time the I/O is performed.
This behavior is masked with smaller queue sizes but is very real and
was very noticeable with earlier 2.6 kenels using the cfq scheduler
which had a default queue size of 8192 where the time difference between
these sets of counters could exceed 10 seconds for large file writes and
small monitoring intervals such as 1 second. In that environment, one
would see extremely high bursts of I/O, sometimes exceeding 500 or even
1000 MB/sec for the first second or two and then drop to 0 for a long
time while the 'number of operations' counters accurately reflect what
is really happening.
The attached patch fixes this problem by simply accumulating the
read/write sector/merge data in temporary variables stored in the
request queue entry, and when the I/O completes copies those values to
the disk statistics block.
-mark
diff -uprN -X dontdiff ../linux-2.6.11.4/drivers/block/ll_rw_blk.c
../linux-2.6.11.4-mjs/drivers/block/ll_rw_blk.c
--- ../linux-2.6.11.4/drivers/block/ll_rw_blk.c 2005-03-15
19:09:00.000000000 -0500
+++ ../linux-2.6.11.4-mjs/drivers/block/ll_rw_blk.c 2005-03-22
15:43:07.000000000 -0500
@@ -2107,13 +2107,13 @@ void drive_stat_acct(struct request *rq,
return;
if (rw == READ) {
- __disk_stat_add(rq->rq_disk, read_sectors, nr_sectors);
+ rq->read_sectors_accum += nr_sectors;
if (!new_io)
- __disk_stat_inc(rq->rq_disk, read_merges);
+ rq->read_merges_accum += 1;
} else if (rw == WRITE) {
- __disk_stat_add(rq->rq_disk, write_sectors, nr_sectors);
+ rq->write_sectors_accum += nr_sectors;
if (!new_io)
- __disk_stat_inc(rq->rq_disk, write_merges);
+ rq->write_merges_accum += 1;
}
if (new_io) {
disk_round_stats(rq->rq_disk);
@@ -2487,6 +2487,11 @@ get_rq:
req->rq_disk = bio->bi_bdev->bd_disk;
req->start_time = jiffies;
+ req->write_sectors_accum=0;
+ req->write_merges_accum=0;
+ req->read_sectors_accum=0;
+ req->read_merges_accum=0;
+
add_request(q, req);
out:
if (freereq)
@@ -2989,10 +2994,14 @@ void end_that_request_last(struct reques
case WRITE:
__disk_stat_inc(disk, writes);
__disk_stat_add(disk, write_ticks, duration);
+ __disk_stat_add(disk, write_sectors,
req->write_sectors_accum);
+ __disk_stat_add(disk, write_merges,
req->write_merges_accum);
break;
case READ:
__disk_stat_inc(disk, reads);
__disk_stat_add(disk, read_ticks, duration);
+ __disk_stat_add(disk, read_sectors,
req->read_sectors_accum);
+ __disk_stat_add(disk, read_merges,
req->read_merges_accum);
break;
}
disk_round_stats(disk);
diff -uprN -X dontdiff ../linux-2.6.11.4/include/linux/blkdev.h
../linux-2.6.11.4-mjs/include/linux/blkdev.h
--- ../linux-2.6.11.4/include/linux/blkdev.h 2005-03-15
19:09:02.000000000 -0500
+++ ../linux-2.6.11.4-mjs/include/linux/blkdev.h 2005-03-22
15:42:47.000000000 -0500
@@ -176,6 +176,12 @@ struct request {
* For Power Management requests
*/
struct request_pm_state *pm;
+
+ /*
+ * accumulate intermediate stats
+ */
+ unsigned long read_sectors_accum, write_sectors_accum;
+ unsigned long read_merges_accum, write_merges_accum;
};
/*
next reply other threads:[~2005-03-22 21:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-22 21:50 Mark Seger [this message]
2005-03-23 9:19 ` Patch for inconsistent recording of block device statistics Jens Axboe
2005-03-23 14:40 ` Mark Seger
2005-03-23 15:51 ` Jens Axboe
2005-03-23 18:23 ` Mark Seger
2005-03-23 18:33 ` Jens Axboe
2005-03-24 2:27 ` Mark Goodwin
2005-03-24 6:50 ` Jens Axboe
2005-03-23 15:49 ` Process level I/O stats? Mark Seger
2005-03-23 15:54 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42409313.1010308@hp.com \
--to=mark.seger@hp.com \
--cc=axboe@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox