REPOST [Followup: PROBLEM: Kernel bug at tg3.c:2456]

REPOST [Followup: PROBLEM: Kernel bug at tg3.c:2456]

[Sergio Chiesa]

up :-D

-------- Original Message --------
Subject: Followup: PROBLEM: Kernel bug at tg3.c:2456
Date: Thu, 31 Mar 2005 14:34:22 +0200
From: Sergio Chiesa <sergio.chiesa@eutelia.it>
To: linux-kernel@vger.kernel.org
References: <Pine.LNX.4.53.0503301842460.13508@scsi.edisontel.it>

Sergio Chiesa wrote:

> 7.7.
> Well, it seems that with the original onboard raid controller the bug
> didn't trigger... the controller was swapped with the lsi logic by my
> supplier because it fails badly with raid-5 arrays (hw/fw related issue)
> I also tried the original broadcom driver version 7.3.5 with similar
> results...

I made some tests again, switching back to the onboard dual aic7902 scsi
controller (non raid) the tg3 dont hung anymore.
I just noticed the IRQ mappings change between the two settings.
The Broadcom eth get always the IRQ #25, the two onboard scsi controllers
get #24 and #25 (shared with the eth, is it harmful??) but the megaraid
driver gets the IRQ #28

I think it is something IRQ related because if the eth hungs but the kernel
is still running I see more than 140000 irq per second with "vmstat".

Hope it helps better!

Sergioc.