From: Jay Lan <jlan@engr.sgi.com>
To: johnpol@2ka.mipt.ru
Cc: Andrew Morton <akpm@osdl.org>,
Guillaume Thouvenin <guillaume.thouvenin@bull.net>,
greg@kroah.com, linux-kernel@vger.kernel.org,
efocht@hpce.nec.com, linuxram@us.ibm.com, gh@us.ibm.com,
elsa-devel@lists.sourceforge.net, aquynh@gmail.com,
dean-list-linux-kernel@arctic.org, pj@sgi.com
Subject: Re: [patch 2.6.12-rc1-mm4] fork_connector: add a fork connector
Date: Fri, 08 Apr 2005 13:27:44 -0700 [thread overview]
Message-ID: <4256E940.9050306@engr.sgi.com> (raw)
In-Reply-To: <1112957563.28858.240.camel@uganda>
My workarea was based on 2.6.12-rc1-mm4 plus Guilluame's patch.
Your patch caused 5 out of 8 hunks failure at connector.c
and one failure at connector.h.
Could you generate a new patch based on my version? A tar
file of complete source of drivers/connector would work
also. :)
Thanks!
- jay
Evgeniy Polyakov wrote:
> Could you give attached patch a try instead of previous one.
> It adds gfp mask into cn_netlink_send() call also.
> If you need updated CBUS sources, feel free to ask,
> I will send updated sources with Andrew's comments resolved too.
>
> I do not know exactly your connector version,
> so patch will probably be applied with fuzz.
>
> feel free to contact if it does not apply, I will send
> the whole sources.
>
> Thank you.
>
> * looking for johnpol@2ka.mipt.ru-2004/connector--main--0--patch-38 to compare with
> * comparing to johnpol@2ka.mipt.ru-2004/connector--main--0--patch-38
> M connector.c
> M connector.h
> M cbus.c
>
> * modified files
>
> --- orig/drivers/connector/connector.c
> +++ mod/drivers/connector/connector.c
> @@ -70,7 +70,7 @@
> * then it is new message.
> *
> */
> -void cn_netlink_send(struct cn_msg *msg, u32 __groups)
> +void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask)
> {
> struct cn_callback_entry *n, *__cbq;
> unsigned int size;
> @@ -102,7 +102,7 @@
>
> size = NLMSG_SPACE(sizeof(*msg) + msg->len);
>
> - skb = alloc_skb(size, GFP_ATOMIC);
> + skb = alloc_skb(size, gfp_mask);
> if (!skb) {
> printk(KERN_ERR "Failed to allocate new skb with size=%u.\n", size);
> return;
> @@ -119,11 +119,11 @@
> #endif
>
> NETLINK_CB(skb).dst_groups = groups;
> -
> - uskb = skb_clone(skb, GFP_ATOMIC);
> - if (uskb)
> +#if 0
> + uskb = skb_clone(skb, gfp_mask);
> + if (uskb && 0)
> netlink_unicast(dev->nls, uskb, 0, 0);
> -
> +#endif
> netlink_broadcast(dev->nls, skb, 0, groups, GFP_ATOMIC);
>
> return;
> @@ -158,7 +158,7 @@
> }
> spin_unlock_bh(&dev->cbdev->queue_lock);
>
> - return found;
> + return (found)?0:-ENODEV;
> }
>
> /*
> @@ -181,7 +181,6 @@
> "requested msg->len=%u[%u], nlh->nlmsg_len=%u, skb->len=%u.\n",
> msg->len, NLMSG_SPACE(msg->len + sizeof(*msg)),
> nlh->nlmsg_len, skb->len);
> - kfree_skb(skb);
> return -EINVAL;
> }
> #if 0
> @@ -215,17 +214,18 @@
> skb->len, skb->data_len, skb->truesize, skb->protocol,
> skb_cloned(skb), skb_shared(skb));
> #endif
> - while (skb->len >= NLMSG_SPACE(0)) {
> + if (skb->len >= NLMSG_SPACE(0)) {
> nlh = (struct nlmsghdr *)skb->data;
> +
> if (nlh->nlmsg_len < sizeof(struct cn_msg) ||
> skb->len < nlh->nlmsg_len ||
> nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) {
> -#if 0
> +#if 1
> printk(KERN_INFO "nlmsg_len=%u, sizeof(*nlh)=%u\n",
> nlh->nlmsg_len, sizeof(*nlh));
> #endif
> kfree_skb(skb);
> - break;
> + goto out;
> }
>
> len = NLMSG_ALIGN(nlh->nlmsg_len);
> @@ -233,22 +233,11 @@
> len = skb->len;
>
> err = __cn_rx_skb(skb, nlh);
> - if (err) {
> -#if 0
> - if (err < 0 && (nlh->nlmsg_flags & NLM_F_ACK))
> - netlink_ack(skb, nlh, -err);
> -#endif
> - break;
> - } else {
> -#if 0
> - if (nlh->nlmsg_flags & NLM_F_ACK)
> - netlink_ack(skb, nlh, 0);
> -#endif
> - break;
> - }
> - skb_pull(skb, len);
> + if (err < 0)
> + kfree_skb(skb);
> }
> -
> +
> +out:
> kfree_skb(__skb);
> }
>
> @@ -310,7 +299,7 @@
> m.ack = notify_event;
>
> memcpy(&m.id, id, sizeof(m.id));
> - cn_netlink_send(&m, ctl->group);
> + cn_netlink_send(&m, ctl->group, GFP_ATOMIC);
> }
> }
> spin_unlock_bh(¬ify_lock);
>
>
> --- orig/include/linux/connector.h
> +++ mod/include/linux/connector.h
> @@ -148,7 +148,7 @@
>
> int cn_add_callback(struct cb_id *, char *, void (* callback)(void *));
> void cn_del_callback(struct cb_id *);
> -void cn_netlink_send(struct cn_msg *, u32);
> +void cn_netlink_send(struct cn_msg *, u32, int);
>
> int cn_queue_add_callback(struct cn_queue_dev *dev, struct cn_callback *cb);
> void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
>
>
>
>
>
next prev parent reply other threads:[~2005-04-08 20:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 13:59 [patch 2.6.12-rc1-mm4] fork_connector: add a fork connector Guillaume Thouvenin
2005-03-31 22:44 ` Andrew Morton
2005-04-01 0:10 ` Jay Lan
2005-04-01 7:52 ` Evgeniy Polyakov
2005-04-07 22:40 ` Jay Lan
2005-04-07 22:47 ` Jay Lan
2005-04-08 10:24 ` Evgeniy Polyakov
2005-04-08 10:52 ` Evgeniy Polyakov
2005-04-08 20:27 ` Jay Lan [this message]
2005-04-08 22:08 ` Jay Lan
2005-04-08 22:18 ` Evgeniy Polyakov
2005-04-09 3:31 ` Jay Lan
2005-04-09 6:29 ` Evgeniy Polyakov
2005-04-11 5:43 ` Jay Lan
2005-04-11 6:44 ` Evgeniy Polyakov
2005-04-11 6:51 ` Andrew Morton
2005-04-11 7:31 ` Evgeniy Polyakov
2005-03-31 22:53 ` Andrew Morton
2005-04-01 10:56 ` Guillaume Thouvenin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4256E940.9050306@engr.sgi.com \
--to=jlan@engr.sgi.com \
--cc=akpm@osdl.org \
--cc=aquynh@gmail.com \
--cc=dean-list-linux-kernel@arctic.org \
--cc=efocht@hpce.nec.com \
--cc=elsa-devel@lists.sourceforge.net \
--cc=gh@us.ibm.com \
--cc=greg@kroah.com \
--cc=guillaume.thouvenin@bull.net \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxram@us.ibm.com \
--cc=pj@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox