From: Jay Lan <jlan@engr.sgi.com>
To: johnpol@2ka.mipt.ru
Cc: Andrew Morton <akpm@osdl.org>,
Guillaume Thouvenin <guillaume.thouvenin@bull.net>,
greg@kroah.com, linux-kernel@vger.kernel.org,
efocht@hpce.nec.com, linuxram@us.ibm.com, gh@us.ibm.com,
elsa-devel@lists.sourceforge.net, aquynh@gmail.com,
dean-list-linux-kernel@arctic.org, pj@sgi.com
Subject: Re: [patch 2.6.12-rc1-mm4] fork_connector: add a fork connector
Date: Fri, 08 Apr 2005 15:08:13 -0700 [thread overview]
Message-ID: <425700CD.5040906@engr.sgi.com> (raw)
In-Reply-To: <4256E940.9050306@engr.sgi.com>
Hi Evgeniy,
Forget about my previous request of a new patch.
The failures were straight forward enough to figure out.
- jay
Jay Lan wrote:
> My workarea was based on 2.6.12-rc1-mm4 plus Guilluame's patch.
>
> Your patch caused 5 out of 8 hunks failure at connector.c
> and one failure at connector.h.
>
> Could you generate a new patch based on my version? A tar
> file of complete source of drivers/connector would work
> also. :)
>
> Thanks!
> - jay
>
> Evgeniy Polyakov wrote:
>
>> Could you give attached patch a try instead of previous one.
>> It adds gfp mask into cn_netlink_send() call also.
>> If you need updated CBUS sources, feel free to ask, I will send
>> updated sources with Andrew's comments resolved too.
>>
>> I do not know exactly your connector version, so patch will probably
>> be applied with fuzz.
>>
>> feel free to contact if it does not apply, I will send
>> the whole sources.
>>
>> Thank you.
>>
>> * looking for johnpol@2ka.mipt.ru-2004/connector--main--0--patch-38 to
>> compare with
>> * comparing to johnpol@2ka.mipt.ru-2004/connector--main--0--patch-38
>> M connector.c
>> M connector.h
>> M cbus.c
>>
>> * modified files
>>
>> --- orig/drivers/connector/connector.c
>> +++ mod/drivers/connector/connector.c
>> @@ -70,7 +70,7 @@
>> * then it is new message.
>> *
>> */
>> -void cn_netlink_send(struct cn_msg *msg, u32 __groups)
>> +void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask)
>> {
>> struct cn_callback_entry *n, *__cbq;
>> unsigned int size;
>> @@ -102,7 +102,7 @@
>>
>> size = NLMSG_SPACE(sizeof(*msg) + msg->len);
>>
>> - skb = alloc_skb(size, GFP_ATOMIC);
>> + skb = alloc_skb(size, gfp_mask);
>> if (!skb) {
>> printk(KERN_ERR "Failed to allocate new skb with size=%u.\n",
>> size);
>> return;
>> @@ -119,11 +119,11 @@
>> #endif
>>
>> NETLINK_CB(skb).dst_groups = groups;
>> -
>> - uskb = skb_clone(skb, GFP_ATOMIC);
>> - if (uskb)
>> +#if 0
>> + uskb = skb_clone(skb, gfp_mask);
>> + if (uskb && 0)
>> netlink_unicast(dev->nls, uskb, 0, 0);
>> -
>> +#endif
>> netlink_broadcast(dev->nls, skb, 0, groups, GFP_ATOMIC);
>>
>> return;
>> @@ -158,7 +158,7 @@
>> }
>> spin_unlock_bh(&dev->cbdev->queue_lock);
>>
>> - return found;
>> + return (found)?0:-ENODEV;
>> }
>>
>> /*
>> @@ -181,7 +181,6 @@
>> "requested msg->len=%u[%u], nlh->nlmsg_len=%u,
>> skb->len=%u.\n",
>> msg->len, NLMSG_SPACE(msg->len + sizeof(*msg)),
>> nlh->nlmsg_len, skb->len);
>> - kfree_skb(skb);
>> return -EINVAL;
>> }
>> #if 0
>> @@ -215,17 +214,18 @@
>> skb->len, skb->data_len, skb->truesize, skb->protocol,
>> skb_cloned(skb), skb_shared(skb));
>> #endif
>> - while (skb->len >= NLMSG_SPACE(0)) {
>> + if (skb->len >= NLMSG_SPACE(0)) {
>> nlh = (struct nlmsghdr *)skb->data;
>> +
>> if (nlh->nlmsg_len < sizeof(struct cn_msg) ||
>> skb->len < nlh->nlmsg_len ||
>> nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) {
>> -#if 0
>> +#if 1
>> printk(KERN_INFO "nlmsg_len=%u, sizeof(*nlh)=%u\n",
>> nlh->nlmsg_len, sizeof(*nlh));
>> #endif
>> kfree_skb(skb);
>> - break;
>> + goto out;
>> }
>>
>> len = NLMSG_ALIGN(nlh->nlmsg_len);
>> @@ -233,22 +233,11 @@
>> len = skb->len;
>>
>> err = __cn_rx_skb(skb, nlh);
>> - if (err) {
>> -#if 0
>> - if (err < 0 && (nlh->nlmsg_flags & NLM_F_ACK))
>> - netlink_ack(skb, nlh, -err);
>> -#endif
>> - break;
>> - } else {
>> -#if 0
>> - if (nlh->nlmsg_flags & NLM_F_ACK)
>> - netlink_ack(skb, nlh, 0);
>> -#endif
>> - break;
>> - }
>> - skb_pull(skb, len);
>> + if (err < 0)
>> + kfree_skb(skb);
>> }
>> -
>> +
>> +out:
>> kfree_skb(__skb);
>> }
>>
>> @@ -310,7 +299,7 @@
>> m.ack = notify_event;
>>
>> memcpy(&m.id, id, sizeof(m.id));
>> - cn_netlink_send(&m, ctl->group);
>> + cn_netlink_send(&m, ctl->group, GFP_ATOMIC);
>> }
>> }
>> spin_unlock_bh(¬ify_lock);
>>
>>
>> --- orig/include/linux/connector.h
>> +++ mod/include/linux/connector.h
>> @@ -148,7 +148,7 @@
>>
>> int cn_add_callback(struct cb_id *, char *, void (* callback)(void *));
>> void cn_del_callback(struct cb_id *);
>> -void cn_netlink_send(struct cn_msg *, u32);
>> +void cn_netlink_send(struct cn_msg *, u32, int);
>>
>> int cn_queue_add_callback(struct cn_queue_dev *dev, struct
>> cn_callback *cb);
>> void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
>>
>>
>>
>>
>>
>
next prev parent reply other threads:[~2005-04-08 22:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 13:59 [patch 2.6.12-rc1-mm4] fork_connector: add a fork connector Guillaume Thouvenin
2005-03-31 22:44 ` Andrew Morton
2005-04-01 0:10 ` Jay Lan
2005-04-01 7:52 ` Evgeniy Polyakov
2005-04-07 22:40 ` Jay Lan
2005-04-07 22:47 ` Jay Lan
2005-04-08 10:24 ` Evgeniy Polyakov
2005-04-08 10:52 ` Evgeniy Polyakov
2005-04-08 20:27 ` Jay Lan
2005-04-08 22:08 ` Jay Lan [this message]
2005-04-08 22:18 ` Evgeniy Polyakov
2005-04-09 3:31 ` Jay Lan
2005-04-09 6:29 ` Evgeniy Polyakov
2005-04-11 5:43 ` Jay Lan
2005-04-11 6:44 ` Evgeniy Polyakov
2005-04-11 6:51 ` Andrew Morton
2005-04-11 7:31 ` Evgeniy Polyakov
2005-03-31 22:53 ` Andrew Morton
2005-04-01 10:56 ` Guillaume Thouvenin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=425700CD.5040906@engr.sgi.com \
--to=jlan@engr.sgi.com \
--cc=akpm@osdl.org \
--cc=aquynh@gmail.com \
--cc=dean-list-linux-kernel@arctic.org \
--cc=efocht@hpce.nec.com \
--cc=elsa-devel@lists.sourceforge.net \
--cc=gh@us.ibm.com \
--cc=greg@kroah.com \
--cc=guillaume.thouvenin@bull.net \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxram@us.ibm.com \
--cc=pj@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox