From: "Rinaldi J. Montessi" <rinaldij@adelphia.net>
To: linux-kernel@vger.kernel.org
Subject: SCSI/libata/SATA problem
Date: Sat, 14 May 2005 17:43:32 -0400 [thread overview]
Message-ID: <42867104.60307@adelphia.net> (raw)
About the time the SCSI subsystem driver is loaded the hard drive
activity light comes on and never goes out. The drive is a Western
Digital, Vendor: ATA Model: WDC WD1200JD-00H Rev: 08.0.
The motherboard is an ASUS P5DA2-E Deluxe (intel 925x chipset).
Western Digital and ASUS both recommended I check the jumper settings,
which I had done. ASUS also sent me a CD containing updates for the
Windows drivers. I don't use Windows, and presume the disk to be
irrelevant to solving the problem.
There appears to be no problems with data corruption; meaning if I copy
large files from sda1 to hda1 drives the files show no difference.
If I boot only to hda1 and not automount the SATA drive (/home, /usr)
things appear normal (no LED except when there is activity).
I saw some libata changes in the latest 31-pre2 so compiled and rebooted
with no difference in behavior.
Links to dmesg, .config, and lspci output at bottom.
Same behavior in the latest 2.6.11 kernel (same drivers back ported?)
I am not subscribed to the list but do follow it via USENET.
uname -a
Linux Senior 2.4.30 #12 Wed May 11 21:15:29 EDT 2005 i686 unknown
unknown GNU/Linux
cat /proc/cmdline
BOOT_IMAGE=2.4.30_hda1 ro root=301 hde=ide-cd hdg=ide-cd hdh=ide-cd
ata2=none ata3=none ata4=none
dmesg | grep -i scsi
SCSI subsystem driver Revision: 1.00
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
dmesg | grep libata
libata version 1.10 loaded.
dmesg | grep SATA
ahci(00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 cmd 0xF8800D00 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF8800D80 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF8800E00 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF8800E80 ctl 0x0 bmdma 0x0 irq 19
http://users.adelphia.net/~rinaldij/lspci.log
http://users.adelphia.net/~rinaldij/dmesg.log
http://users.adelphia.net/~rinaldij/kernel.cfg
Rinaldi
--
The day after tomorrow is the third day of the rest of your life.
next reply other threads:[~2005-05-14 21:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-14 21:43 Rinaldi J. Montessi [this message]
2005-05-17 12:55 ` SCSI/libata/SATA problem Michal Vanco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42867104.60307@adelphia.net \
--to=rinaldij@adelphia.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox