SCSI/libata/SATA problem

SCSI/libata/SATA problem

[Rinaldi J. Montessi]

About the time the SCSI subsystem driver is loaded the hard drive
activity light comes on and never goes out.  The drive is a Western
Digital, Vendor: ATA Model: WDC WD1200JD-00H  Rev: 08.0.

The motherboard is an ASUS P5DA2-E Deluxe (intel 925x chipset).

Western Digital and ASUS both recommended I check the jumper settings,
which I had done.  ASUS also sent me a CD containing updates for the
Windows drivers.  I don't use Windows, and presume the disk to be
irrelevant to solving the problem.

There appears to be no problems with data corruption; meaning if I copy
large files from sda1 to hda1 drives the files show no difference.

If I boot only to hda1 and not automount the SATA drive (/home, /usr)
things appear normal (no LED except when there is activity).

I saw some libata changes in the latest 31-pre2 so compiled and rebooted
with no difference in behavior.

Links to dmesg, .config, and lspci output at bottom.

Same behavior in the latest 2.6.11 kernel (same drivers back ported?)

I am not subscribed to the list but do follow it via USENET.

uname -a
Linux Senior 2.4.30 #12 Wed May 11 21:15:29 EDT 2005 i686 unknown
unknown GNU/Linux

cat /proc/cmdline
BOOT_IMAGE=2.4.30_hda1 ro root=301 hde=ide-cd hdg=ide-cd hdh=ide-cd
ata2=none ata3=none ata4=none

dmesg | grep -i scsi
SCSI subsystem driver Revision: 1.00
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
     Type:   Direct-Access                      ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)

dmesg | grep libata
libata version 1.10 loaded.

dmesg | grep SATA
ahci(00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 cmd 0xF8800D00 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF8800D80 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF8800E00 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF8800E80 ctl 0x0 bmdma 0x0 irq 19

http://users.adelphia.net/~rinaldij/lspci.log
http://users.adelphia.net/~rinaldij/dmesg.log
http://users.adelphia.net/~rinaldij/kernel.cfg

Rinaldi
-- 
The day after tomorrow is the third day of the rest of your life.

Re: SCSI/libata/SATA problem

[Michal Vanco]

[-- Attachment #1: Type: text/plain, Size: 384 bytes --]

On Saturday 14 May 2005 23:43, Rinaldi J. Montessi wrote:
> About the time the SCSI subsystem driver is loaded the hard drive
> activity light comes on and never goes out.  The drive is a Western
> Digital, Vendor: ATA Model: WDC WD1200JD-00H  Rev: 08.0.
>

Same problem here with Fujitsu-Siemens Lifebook E8020 laptop running 2.6.11.9. 
Chipset is ICH6.

regards,
-michal

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]