From: Prakash Punnoor <prakash@punnoor.de>
To: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: cpufreq/speedstep won't work on Sony Vaio PCG-F807K
Date: Tue, 24 May 2005 23:42:07 +0200 [thread overview]
Message-ID: <42939FAF.8040805@punnoor.de> (raw)
In-Reply-To: <20050524203300.GA24187@isilmar.linta.de>
[-- Attachment #1: Type: text/plain, Size: 2620 bytes --]
Dominik Brodowski schrieb:
> On Tue, May 24, 2005 at 06:27:44PM +0200, Prakash Punnoor wrote:
>>subject says it all. The cpufreq interface won't show up (using kernel
>>2.6.12-rc4). I tried the speedstep-smi and acpi-cpufreq module. When I try to
>>insert one of them, modprobe just report: No such device.
>
>
> Please compile the kernel with CPUFREQ_DEBUG enabled, boot the kernel with
> the option cpufreq.debug=2 and (try to) modprobe both modules again. Then
> send me or the cpufreq list (see MAINTAINERS) the output of "dmesg".
I first tried acpi-cpufreq (which didn't output much), then speedstep:
acpi-cpufreq: acpi_cpufreq_init
acpi-cpufreq: acpi_cpufreq_cpu_init
acpi-cpufreq: acpi_processor_cpu_init_pdc
speedstep-lib: x86: 6, model: 8
speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x47c80020, 0x0
speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0xfb4d0000
speedstep-smi: signature:0x47534943, command:0x008000b2, event:0x000000b3,
perf_level:0x07d00100.
speedstep-smi: trying to obtain ownership with command 47534980 at port b2
speedstep-smi: result is 0
speedstep-smi: trying to determine frequencies with command 47534980 at port b2
speedstep-smi: result 47534980, low_freq 0, high_freq 4
speedstep-smi: could not detect low and high frequencies by SMI call.
speedstep-lib: trying to determine both speeds
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x47c80020 0x0
speedstep-lib: speed is 650000
speedstep-lib: previous seped is 650000
speedstep-smi: trying to set frequency to state 1 with command 47534980 at port b2
speedstep-smi: retry 1, previous result 0, waiting...
speedstep-smi: retry 2, previous result 0, waiting...
speedstep-smi: retry 3, previous result 0, waiting...
speedstep-smi: retry 4, previous result 0, waiting...
speedstep-smi: retry 5, previous result 0, waiting...
cpufreq: change failed with new_state 2 and result 0
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x47c80020 0x0
speedstep-lib: speed is 650000
speedstep-lib: low seped is 650000
speedstep-smi: trying to set frequency to state 0 with command 47534980 at port b2
speedstep-smi: retry 1, previous result 0, waiting...
speedstep-smi: retry 2, previous result 0, waiting...
speedstep-smi: retry 3, previous result 0, waiting...
speedstep-smi: retry 4, previous result 0, waiting...
speedstep-smi: retry 5, previous result 0, waiting...
cpufreq: change failed with new_state 2 and result 0
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x47c80020 0x0
speedstep-lib: speed is 650000
speedstep-lib: high seped is 650000
speedstep-smi: could not detect two different speeds -- aborting.
HTH,
Prakash
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2005-05-24 21:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-24 16:27 cpufreq/speedstep won't work on Sony Vaio PCG-F807K Prakash Punnoor
2005-05-24 20:33 ` Dominik Brodowski
2005-05-24 21:42 ` Prakash Punnoor [this message]
2005-06-05 17:24 ` Dominik Brodowski
2005-06-06 10:59 ` Prakash Punnoor
2005-06-06 11:55 ` Dominik Brodowski
2005-06-06 12:47 ` Prakash Punnoor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42939FAF.8040805@punnoor.de \
--to=prakash@punnoor.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox