From: Michael Krufky <mike@krufky.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@osdl.org
Subject: [PATCH] DViCO FusionHDTV3 Gold-T documentation fix
Date: Fri, 03 Jun 2005 22:52:22 -0400 [thread overview]
Message-ID: <42A11766.7080902@krufky.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 385 bytes --]
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is
printed on the card. This fix corrects the error in all places, and
corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation.
This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's
patch "Add support for PixelView Ultra Pro in v4l" (because of the
change from card=27 to card=28)
[-- Attachment #2: dvico-fusionhdtv-3-gold-t-documentation.patch --]
[-- Type: text/plain, Size: 3480 bytes --]
diff -upr a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
--- a/Documentation/video4linux/CARDLIST.cx88 2005-06-03 21:29:24.000000000 +0000
+++ b/Documentation/video4linux/CARDLIST.cx88 2005-06-03 22:13:49.000000000 +0000
@@ -26,4 +26,4 @@ card=24 - Hauppauge WinTV 28xxx (Roslyn)
card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
card=26 - IODATA GV/BCTV7E
card=27 - PixelView PlayTV Ultra Pro (Stereo)
-card=28 - DViCO - FusionHDTV 3 Gold-Q
+card=28 - DViCO - FusionHDTV 3 Gold-T
diff -upr a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
--- a/Documentation/video4linux/CARDLIST.tuner 2005-06-03 21:29:24.000000000 +0000
+++ b/Documentation/video4linux/CARDLIST.tuner 2005-06-03 22:13:31.000000000 +0000
@@ -58,4 +58,4 @@ tuner=56 - Philips PAL/SECAM multi (FQ12
tuner=57 - Philips FQ1236A MK4
tuner=58 - Ymec TVision TVF-8531MF
tuner=59 - Ymec TVision TVF-5533MF
-tuner=60 - Thomson DDT 7611
+tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
diff -upr a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
--- a/drivers/media/video/cx88/cx88-cards.c 2005-06-03 21:54:36.000000000 +0000
+++ b/drivers/media/video/cx88/cx88-cards.c 2005-06-03 22:10:56.000000000 +0000
@@ -428,16 +428,11 @@ struct cx88_board cx88_boards[] = {
.vmux = 2,
.gpio0 = 0x0f00,
}},
-#if 0
- .ts = {
- .type = CX88_TS,
- .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
- }
-#endif
- },
- [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
- .name = "DViCO - FusionHDTV 3 Gold-Q",
- .tuner_type = 52, /* Thomson DDT 7610 ATSC/NTSC - Its actually a 7611 chip, but this works */
+ },
+ [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = {
+ .name = "DViCO - FusionHDTV 3 Gold-T",
+ .tuner_type = 52, /* Thomson DDT 7611 ATSC/NTSC */
+ /* See DViCO FusionHDTV 3 Gold for GPIO documentation. */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
@@ -455,12 +450,6 @@ struct cx88_board cx88_boards[] = {
.vmux = 2,
.gpio0 = 0x0f00,
}},
-#if 0
- .ts = {
- .type = CX88_TS,
- .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
- }
-#endif
},
[CX88_BOARD_HAUPPAUGE_DVB_T1] = {
.name = "Hauppauge Nova-T DVB-T",
@@ -723,7 +712,7 @@ struct cx88_subid cx88_subids[] = {
},{
.subvendor = 0x18ac,
.subdevice = 0xd820,
- .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T,
},{
.subvendor = 0x18AC,
.subdevice = 0xDB00,
diff -upr a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
--- a/drivers/media/video/cx88/cx88.h 2005-06-03 21:54:36.000000000 +0000
+++ b/drivers/media/video/cx88/cx88.h 2005-06-03 21:55:44.000000000 +0000
@@ -163,7 +163,7 @@ extern struct sram_channel cx88_sram_cha
#define CX88_BOARD_DIGITALLOGIC_MEC 25
#define CX88_BOARD_IODATA_GVBCTV7E 26
#define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27
-#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q 28
+#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T 28
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
reply other threads:[~2005-06-04 2:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42A11766.7080902@krufky.com \
--to=mike@krufky.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox