Re: 2.6.12?

[Sylvain Meyer <sylvain.meyer@worldonline.fr>]

        Hi Brice,

    What is your X configuration ? The default parameters are ok for a 
VideoRam parameter up to 32MB. Could you check two things, please ?
    - First, could you set VideoRam to 32MB in your X conf.
    - Second, could you set it to 64MB and use a voffset=64 parameter 
for intelfb.

Thanks
Sylvain

Brice Goglin a écrit:

>Andrew Morton a écrit :
>  
>
>>Brice Goglin <Brice.Goglin@ens-lyon.org> wrote:
>>
>>    
>>
>>>Andrew Morton a écrit :
>>>
>>>      
>>>
>>>>Lots of USB problems, quite a few input problems.  fbdev, ACPI, ATAPI.  All
>>>>the usual suspects.
>>>>
>>>>Subject: intelfb crash on i845
>>>>Subject: Re: [Linux-fbdev-devel] intelfb crash on i845
>>>>        
>>>>
>>>These two entries seem to be the same one, from me.
>>>Sylvain Meyer was working on it. And I've recently seen some patches
>>>      
>>>
>>>from him on the mm-commit list. I didn't have time to test them but I
>>    
>>
>>>should be able to try next week (especially if a new -mm is released
>>>soon).
>>>      
>>>
>
>Hi Andrew,
>
>I just tried with rc6-mm1 and the problem is still present:
>when the onboard video memory is set to 1MB in the BIOS, switching from
>X to VT1 gives a dirty framebuffer console (no text, just wrong colors).
>Setting memory to 8MB in the BIOS makes all this work.
>
>Brice
>
>  
>