public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bill Gatliff <bgat@billgatliff.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: Patch of a new driver for kernel 2.4.x that need review
Date: Wed, 22 Jun 2005 15:59:12 -0500	[thread overview]
Message-ID: <42B9D120.6030108@billgatliff.com> (raw)
In-Reply-To: <20050622203211.GI8907@alpha.home.local>

Willy:

Willy Tarreau wrote:

>Hi,
>
>On Wed, Jun 22, 2005 at 10:43:40PM +0300, Pekka Enberg wrote:
>  
>
>>On 6/22/05, Bouchard, Sebastien <Sebastien.Bouchard@ca.kontron.com> wrote:
>>    
>>
>>>+#define TLCLK_REG7 TLCLK_BASE+7
>>>      
>>>
>>Please use enums instead.
>>    
>>
>
>I dont agree with you here : enums are good to simply specify an ordering.
>But they must not be used to specify static mapping. Eg: if REG4 *must* be
>equal to BASE+4, you should not use enums, otherwise it will render the
>code unreadable. I personnaly don't want to count the position of REG7 in
>the enum to discover that it's at BASE+7.
>  
>

What Sebastien is after is something like this:

	enum tclk_regid {TCLK_BASE=0xa80, TCLK_REG0=TCLK_BASE, TCLK_REG1=TCLK_BASE+1...};
	enum tclk_regid tclk;

And then later on, if you ask gdb with the value of tclk is, it can tell you "TCLK_REG1", instead of just 0xa801.  You can also assign values to tclk from within gdb using the enumerations, rather than magic numbers.

If you insist on using #defines, then you need to do them like this at the very least:

	#define TCLK_REG7 (TCLK_BASE+7)

... so as to prevent operator precedence problems later on.  I.e. what happens here:

	tclk = TCLK_REG7 / 2;

Not implying that the above is a realistic example, I'm just pointing out a potential gotcha that is easily avoided...



b.g.

-- 
Bill Gatliff
"A DTI spokesman said Wicks would use his debut announcement to
'reaffirm the government's commitment to developing wind' to tackle
the threat of climate change." -- The Observer, May 22, 2005
bgat@billgatliff.com


  reply	other threads:[~2005-06-22 21:03 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-06-22 15:12 Patch of a new driver for kernel 2.4.x that need review Bouchard, Sebastien
2005-06-22 19:43 ` Pekka Enberg
2005-06-22 20:32   ` Willy Tarreau
2005-06-22 20:59     ` Bill Gatliff [this message]
2005-06-22 21:58       ` Willy Tarreau
2005-06-23  4:58       ` Pekka Enberg
2005-06-23  4:16     ` Pekka J Enberg
2005-06-23  4:49       ` Willy Tarreau
2005-07-06 21:11         ` Mark Gross
2005-07-07  6:00           ` Pekka J Enberg
2005-07-07  6:50             ` Dmitry Torokhov
2005-07-07  6:55               ` Pekka J Enberg
2005-07-07  7:13                 ` Dmitry Torokhov
2005-07-07  7:43                   ` Pekka J Enberg
2005-07-07  6:10           ` Pekka J Enberg
2005-06-22 20:04 ` Pekka Enberg
2005-06-23 21:42   ` Alan Cox
2005-06-22 21:18 ` Jesper Juhl
2005-07-06 21:14 ` Mark Gross
2005-07-06 22:49   ` randy_dunlap
2005-07-06 22:57   ` Greg KH
2005-08-08 15:35   ` Mark Gross
2005-08-09  7:17     ` Pekka Enberg
2005-08-09 16:56     ` Mark Gross
2005-08-09 17:51       ` Nishanth Aravamudan
  -- strict thread matches above, loose matches on Subject: below --
2005-07-07  8:15 moreau francis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42B9D120.6030108@billgatliff.com \
    --to=bgat@billgatliff.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox