From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261278AbVGBUrJ (ORCPT ); Sat, 2 Jul 2005 16:47:09 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261280AbVGBUrJ (ORCPT ); Sat, 2 Jul 2005 16:47:09 -0400 Received: from unknown.ghostnet.de ([217.69.161.74]:30874 "EHLO nexave.de") by vger.kernel.org with ESMTP id S261278AbVGBUrC (ORCPT ); Sat, 2 Jul 2005 16:47:02 -0400 Message-ID: <42C6FD00.2060408@cyberoptic.de> Date: Sat, 02 Jul 2005 22:45:52 +0200 From: CyberOptic User-Agent: Mozilla Thunderbird 1.0.2 (Windows/20050317) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: ppa / parport zip-drive / kernel 2.6.12.2 X-Enigmail-Version: 0.91.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Scanner: exiscan *1Doot1-00049x-00*OXnlFRuuOYU* Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I wanted to activate my old dust-covered IOmega ZIP-Drive 100MB (PPA), but didn´t get it working (see dmesg-extract). Sadly, google could not help me in my case. Therefore my decision to ask the good people at this newsgroup :-) ---dmesg--- pnp: Device 00:0a activated. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] SCSI subsystem initialized ppa: Version 2.07 (for Linux 2.4.x) ppa: Found device at ID 6, Attempting to use EPP 32 bit ppa: Found device at ID 6, Attempting to use PS/2 ppa: Communication established with ID 6 using PS/2 scsi0 : Iomega VPI0 (ppa) interface scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 6 lun 0 ---lsmod--- Module Size Used by parport_pc 41540 0 ppa 12808 0 scsi_mod 137672 1 ppa parport 37448 2 parport_pc,ppa Things I´ve already tried: - BIOS Settings switched to SPP, EPP, ECP, ECP/EPP - Reconnected the cabling - Rebooted with ZIP-Drive a) connected and powered b) disconnected - Loaded modules with both disk inserted and ejected - Tried kernel-settings CONFIG_SCSI_IZIP_EPP16 and CONFIG_SCSI_IZIP_SLOW_CTR Other Information: - Mainboard: VIA Apollo CLE266 (EPIA M10000 with VIA C3 1GHz CPU) - Drive works with Windows 2000 on the same machine - No printer connected to the ZIP-Drive - Linux second 2.6.12.2 #3 Sat Jul 2 20:51:04 CEST 2005 i686 GNU/Linux Surely there is someone out there knowing a hint or solution? At least I´m hoping so. Thanks in advance - Sebastian