From: Linda Xie <lxiep@us.ibm.com>
To: Anton Blanchard <anton@samba.org>
Cc: James.Bottomley@SteelEye.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
Dave C Boutcher <sleddog@us.ibm.com>,
Santiago Leon <santil@us.ibm.com>
Subject: Re: [PATCH] IBM VSCSI Client: sending client info to server
Date: Wed, 06 Jul 2005 11:07:57 -0500 [thread overview]
Message-ID: <42CC01DD.7000306@us.ibm.com> (raw)
In-Reply-To: <20050701234719.GA5384@krispykreme>
[-- Attachment #1: Type: text/plain, Size: 437 bytes --]
Anton Blanchard wrote:
>Hi,
>
>
>
>>The attached patch fixes the problem in IBM VSCSI Client where the
>>client doesn't send the information which is expected by the server.
>>
>>
>
>...
>
>
>
>>+ printk(KERN_INFO "rpa_vscsi: SPR_VERSION: %s\n", SRP_VERSION);
>>
>>
>
>Just a small thing, should the printk say SRP_VERSION?
>
>Anton
>
>
>
Anton, thank you for catching my typo. Attached is an updated version.
Linda
[-- Attachment #2: mainline-IBMVSCSI-CLIENT-madinfo.patch --]
[-- Type: text/plain, Size: 3837 bytes --]
diff -X ../dontdiff -purN linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/ibmvscsi.c madinfo/drivers/scsi/ibmvscsi/ibmvscsi.c
--- linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/ibmvscsi.c 2005-06-20 19:00:43.000000000 -0500
+++ madinfo/drivers/scsi/ibmvscsi/ibmvscsi.c 2005-06-24 16:36:16.000000000 -0500
@@ -87,7 +87,7 @@ static int max_channel = 3;
static int init_timeout = 5;
static int max_requests = 50;
-#define IBMVSCSI_VERSION "1.5.5"
+#define IBMVSCSI_VERSION "1.5.6"
MODULE_DESCRIPTION("IBM Virtual SCSI");
MODULE_AUTHOR("Dave Boutcher");
@@ -675,8 +675,6 @@ static void send_mad_adapter_info(struct
struct viosrp_adapter_info *req;
struct srp_event_struct *evt_struct;
- memset(&hostdata->madapter_info, 0x00, sizeof(hostdata->madapter_info));
-
evt_struct = get_event_struct(&hostdata->pool);
if (!evt_struct) {
printk(KERN_ERR "ibmvscsi: couldn't allocate an event "
diff -X ../dontdiff -purN linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/rpa_vscsi.c madinfo/drivers/scsi/ibmvscsi/rpa_vscsi.c
--- linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/rpa_vscsi.c 2005-03-02 01:38:13.000000000 -0600
+++ madinfo/drivers/scsi/ibmvscsi/rpa_vscsi.c 2005-07-06 11:31:31.000000000 -0500
@@ -33,6 +33,10 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include "ibmvscsi.h"
+#include "srp.h"
+
+static char partition_name[97] = "UNKNOWN";
+static unsigned int partition_number = -1;
/* ------------------------------------------------------------
* Routines for managing the command/response queue
@@ -148,6 +152,48 @@ static void ibmvscsi_task(void *data)
}
}
+static void gather_partition_info(void)
+{
+ struct device_node *rootdn;
+
+ char *ppartition_name;
+ unsigned int *p_number_ptr;
+
+ /* Retrieve information about this partition */
+ rootdn = find_path_device("/");
+ if (!rootdn) {
+ return;
+ }
+
+ ppartition_name =
+ get_property(rootdn, "ibm,partition-name", NULL);
+ if (ppartition_name)
+ strncpy(partition_name, ppartition_name,
+ sizeof(partition_name));
+ p_number_ptr =
+ (unsigned int *)get_property(rootdn, "ibm,partition-no",
+ NULL);
+ if (p_number_ptr)
+ partition_number = *p_number_ptr;
+}
+
+static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+ memset(&hostdata->madapter_info, 0x00,
+ sizeof(hostdata->madapter_info));
+
+ printk(KERN_INFO "rpa_vscsi: SRP_VERSION: %s\n", SRP_VERSION);
+ strcpy(hostdata->madapter_info.srp_version, SRP_VERSION);
+
+ strncpy(hostdata->madapter_info.partition_name, partition_name,
+ sizeof(hostdata->madapter_info.partition_name));
+
+ hostdata->madapter_info.partition_number = partition_number;
+
+ hostdata->madapter_info.mad_version = 1;
+ hostdata->madapter_info.os_type = 2;
+}
+
/**
* initialize_crq_queue: - Initializes and registers CRQ with hypervisor
* @queue: crq_queue to initialize and register
@@ -177,6 +223,9 @@ int ibmvscsi_init_crq_queue(struct crq_q
if (dma_mapping_error(queue->msg_token))
goto map_failed;
+ gather_partition_info();
+ set_adapter_info(hostdata);
+
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
queue->msg_token, PAGE_SIZE);
@@ -246,6 +295,8 @@ void ibmvscsi_reset_crq_queue(struct crq
memset(queue->msgs, 0x00, PAGE_SIZE);
queue->cur = 0;
+ set_adapter_info(hostdata);
+
/* And re-open it again */
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
diff -X ../dontdiff -purN linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/srp.h madinfo/drivers/scsi/ibmvscsi/srp.h
--- linux-2.6.12-rc5-git10-orig/drivers/scsi/ibmvscsi/srp.h 2005-03-02 01:38:33.000000000 -0600
+++ madinfo/drivers/scsi/ibmvscsi/srp.h 2005-06-24 16:36:16.000000000 -0500
@@ -28,6 +28,8 @@
#ifndef SRP_H
#define SRP_H
+#define SRP_VERSION "16.a"
+
#define PACKED __attribute__((packed))
enum srp_types {
prev parent reply other threads:[~2005-07-07 0:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-27 22:01 [PATCH] IBM VSCSI Client: sending client info to server Linda Xie
2005-06-29 14:41 ` Dave C Boutcher
2005-07-01 23:47 ` Anton Blanchard
2005-07-06 16:07 ` Linda Xie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42CC01DD.7000306@us.ibm.com \
--to=lxiep@us.ibm.com \
--cc=James.Bottomley@SteelEye.com \
--cc=anton@samba.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=santil@us.ibm.com \
--cc=sleddog@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox