From: Dirk <noisyb@gmx.net>
To: Michael Thonke <iogl64nx@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-rc3-mm3
Date: Fri, 29 Jul 2005 00:02:50 +0200 [thread overview]
Message-ID: <42E9560A.6080205@gmx.net> (raw)
In-Reply-To: <42E96A42.7060405@gmail.com>
Michael Thonke wrote:
> Hello Andrew,
>
> here again I have two problems. With 2.6.13-rc3-mm3 I have problems
> using my SATA drives on Intel ICH6.
> The kernel can't route there IRQs or can't discover them. the option
> irqpoll got them to work now.
> The problem is new because 2.6.13-rc3[-mm1,mm2] work without any
> problems.
>
> The SATA drives are Samsung HD160JJ SATAII. The mainboard I use is a
> ASUS P4GPL-X.
>
> Second one is about Intel HD-Codec (snd-hda-intel) on modprobe when
> loading the module it gives me
>
> ---> snip
> hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
> Unable to handle kernel NULL pointer dereference at virtual address
> 00000000
Hi!
Sorry for interfering but I have the Asus P5RD1-VD with the Realtek
ALC861 (10b9:5461) and with 2.6.13.3 I've got the problem that he
doesn't find /dev/mixer or anything after modprobe snd-hda-intel...
After I attached
http://dlsvr01.asus.com/pub/ASUS/mb/socket775/P5RD1-V/Audio_Linux.zip
(which doesn't work) to a mail in alsa-devel they told me...
"[...]
It tries to access the ALi controller in the same way as the Intel
controller.
It may be possible that the ALi chip was designed to be compatible
with Intel's, but that they got some detail wrong. Or that the driver
gets some detail wrong. There's no way to know without docs[...]"
(not in the archive, yet...)
Dirk
next prev parent reply other threads:[~2005-07-28 21:59 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-28 9:58 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 10:44 ` [-mm patch] fix MTRR compilation with SMP=n Adrian Bunk
2005-07-28 17:11 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:52 ` 2.6.13-rc3-mm3 Russell King
2005-07-28 20:06 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:11 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 19:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 21:40 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 23:31 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 7:06 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 9:27 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 12:01 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 14:12 ` Regression hunting with git (was: Re: 2.6.13-rc3-mm3) Matthias Urlichs
2005-07-28 20:34 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 22:09 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:15 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 20:56 ` 2.6.13-rc3-mm3 Nick Sillik
2005-07-28 23:16 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:29 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 23:29 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 22:02 ` Dirk [this message]
2005-07-28 23:46 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:48 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 19:33 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 0:00 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 5:58 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:08 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 16:15 ` 2.6.13-rc3-mm3 Eric W. Biederman
2005-07-29 6:01 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:10 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-03 1:17 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-03 4:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-07 23:23 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:02 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 23:05 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-29 23:17 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 15:33 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-30 18:02 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-01 15:36 ` 2.6.13-rc3-mm3 Bjorn Helgaas
2005-07-30 10:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-07-30 17:05 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 9:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 9:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 11:12 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 12:46 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 17:35 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 18:21 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:25 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 18:41 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:59 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 21:35 ` 2.6.13-rc3-mm3 Stelian Pop
[not found] ` <Pine.LNX.4.58.0507311125360.29650@g5.osdl.org>
[not found] ` <1122846072.17880.43.camel@deep-space-9.dsnet>
[not found] ` <Pine.LNX.4.58.0507311557020.14342@g5.osdl.org>
2005-08-01 14:37 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 9:49 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 10:32 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 11:40 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 14:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 15:48 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 16:50 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 17:11 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 21:13 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:21 ` 2.6.13-rc3-mm3 Greg KH
2005-08-02 21:47 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:57 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 22:59 ` [patch 1/2] increase PCIBIOS_MIN_IO on x86 Ivan Kokshaysky
2005-08-02 23:09 ` [patch 2/2] ACPI: " Ivan Kokshaysky
2005-08-01 1:43 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 16:10 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 20:02 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 20:36 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:07 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:40 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:52 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 22:02 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 22:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:01 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 23:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:32 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 0:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 11:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 14:04 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 14:37 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-05 15:17 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-07 13:44 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 16:48 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 17:10 ` 2.6.13-rc3-mm3 Russell King
2005-08-08 17:15 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 20:40 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 22:12 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-09 0:57 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-09-14 14:32 ` 2.6.13-mm3 and 2.6.14-rc1 both broken (SCSI?) Martin J. Bligh
2005-09-14 14:09 ` Anton Blanchard
-- strict thread matches above, loose matches on Subject: below --
2005-07-28 10:40 2.6.13-rc3-mm3 Sebastian Kaergel
2005-07-28 9:54 ` 2.6.13-rc3-mm3 Alexandre Buisse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42E9560A.6080205@gmx.net \
--to=noisyb@gmx.net \
--cc=akpm@osdl.org \
--cc=iogl64nx@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox