From: Michael Thonke <iogl64nx@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-rc3-mm3
Date: Thu, 28 Jul 2005 23:29:06 +0000 [thread overview]
Message-ID: <42E96A42.7060405@gmail.com> (raw)
In-Reply-To: <20050728025840.0596b9cb.akpm@osdl.org>
Hello Andrew,
here again I have two problems. With 2.6.13-rc3-mm3 I have problems
using my SATA drives on Intel ICH6.
The kernel can't route there IRQs or can't discover them. the option
irqpoll got them to work now.
The problem is new because 2.6.13-rc3[-mm1,mm2] work without any problems.
The SATA drives are Samsung HD160JJ SATAII. The mainboard I use is a
ASUS P4GPL-X.
Second one is about Intel HD-Codec (snd-hda-intel) on modprobe when
loading the module it gives me
---> snip
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
f88713f4
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
last sysfs file:
Modules linked in: snd_hda_intel snd_hda_codec nvidia
CPU: 0
EIP: 0060:[<f88713f4>] Tainted: P VLI
EFLAGS: 00010293 (2.6.13-rc3-mm3pm)
eax: fffffffe ebx: f3b33548 ecx: 00000000 edx: 00000000
esi: f3b33400 edi: 00000000 ebp: 00000006 esp: f0371ddc
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 7398, threadinfo=f0370000 task=f4183560)
Stack: 00000000 00000000 00000000 00000000 f3b33400 f3b33548 f0f1d000
f8871933
f3b33400 f0f1d000 f8871bbd f8875478 f88748f6 00000001 f886d77e
00000f00
00000005 00000000 f0f1d000 f54d04c0 00000000 f886d984 00000f00
00000002
Call Trace:
[<f8871933>]
[<f8871bbd>]
[<f886d77e>]
[<f886d984>]
[<f886d592>]
[<c025b87e>]
[<f8f5c871>]
[<f8f5c100>]
[<f8f5c220>]
[<f8f5d533>]
[<c026866a>]
[<c02686be>]
[<c02686f6>]
[<c02bf763>]
[<c02bf899>]
[<c02bee1a>]
[<c02bf8b6>]
[<c02bf860>]
[<c02bf30c>]
[<c02bfc85>]
[<c0268958>]
[<c013b5c9>]
[<c0102fcb>]
Code: 31 c0 53 83 ec 10 89 d3 89 e7 f3 ab 8b 12 31 ff 83 fa 00 7e 45 89
f6 0f b7 44 7b 04 8d 48 ec 66 83 f9 03 77 13 8b 56 3c 83 e8 16 <66> 89
04 7a 8b 13 c7 04 8c 01 00 00 00 47 39 fa 7f da 31 ff 83
--> snip
I also attached the kernel-config and the lspci -vv output.
Thanks again for the patience and the help.
Best regards
Michael
next prev parent reply other threads:[~2005-07-28 21:30 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-28 9:58 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 10:44 ` [-mm patch] fix MTRR compilation with SMP=n Adrian Bunk
2005-07-28 17:11 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:52 ` 2.6.13-rc3-mm3 Russell King
2005-07-28 20:06 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:11 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 19:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 21:40 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 23:31 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 7:06 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 9:27 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 12:01 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 14:12 ` Regression hunting with git (was: Re: 2.6.13-rc3-mm3) Matthias Urlichs
2005-07-28 20:34 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 22:09 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:15 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 20:56 ` 2.6.13-rc3-mm3 Nick Sillik
2005-07-28 23:16 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:29 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 23:29 ` Michael Thonke [this message]
2005-07-28 22:02 ` 2.6.13-rc3-mm3 Dirk
2005-07-28 23:46 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:48 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 19:33 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 0:00 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 5:58 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:08 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 16:15 ` 2.6.13-rc3-mm3 Eric W. Biederman
2005-07-29 6:01 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:10 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-03 1:17 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-03 4:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-07 23:23 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:02 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 23:05 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-29 23:17 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 15:33 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-30 18:02 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-01 15:36 ` 2.6.13-rc3-mm3 Bjorn Helgaas
2005-07-30 10:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-07-30 17:05 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 9:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 9:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 11:12 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 12:46 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 17:35 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 18:21 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:25 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 18:41 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:59 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 21:35 ` 2.6.13-rc3-mm3 Stelian Pop
[not found] ` <Pine.LNX.4.58.0507311125360.29650@g5.osdl.org>
[not found] ` <1122846072.17880.43.camel@deep-space-9.dsnet>
[not found] ` <Pine.LNX.4.58.0507311557020.14342@g5.osdl.org>
2005-08-01 14:37 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 9:49 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 10:32 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 11:40 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 14:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 15:48 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 16:50 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 17:11 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 21:13 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:21 ` 2.6.13-rc3-mm3 Greg KH
2005-08-02 21:47 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:57 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 22:59 ` [patch 1/2] increase PCIBIOS_MIN_IO on x86 Ivan Kokshaysky
2005-08-02 23:09 ` [patch 2/2] ACPI: " Ivan Kokshaysky
2005-08-01 1:43 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 16:10 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 20:02 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 20:36 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:07 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:40 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:52 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 22:02 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 22:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:01 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 23:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:32 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 0:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 11:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 14:04 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 14:37 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-05 15:17 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-07 13:44 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 16:48 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 17:10 ` 2.6.13-rc3-mm3 Russell King
2005-08-08 17:15 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 20:40 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 22:12 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-09 0:57 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-09-14 14:32 ` 2.6.13-mm3 and 2.6.14-rc1 both broken (SCSI?) Martin J. Bligh
2005-09-14 14:09 ` Anton Blanchard
-- strict thread matches above, loose matches on Subject: below --
2005-07-28 10:40 2.6.13-rc3-mm3 Sebastian Kaergel
2005-07-28 9:54 ` 2.6.13-rc3-mm3 Alexandre Buisse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42E96A42.7060405@gmail.com \
--to=iogl64nx@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox